Contents Section: Seats All sections

Seat: Other Lexus RX II рестайлинг

Seats 7 illustrations ~325 words

PRECAUTION

  1. GENERAL PRECAUTION When using the battery during inspection, do not bring the positive and negative tester probes too close to each other as a short circuit may occur.
  2. PRECAUTION OF DISCONNECTING BATTERY TERMINAL NOTE: When disconnecting the negative (-) battery cable, initialize the following system(s) after the cable is reconnected. SYSTEM NAME INDEX System Name See procedure Lighting System «INITIALIZATION»(ref-282976-S16822617822008041400000) Power Windows Control System Power Door Lock System Power Back Door System Back Door Closer System Electrical Back Door Outside Handle System SFI System

Scheme 72

Scheme 72: PARTS LOCATION

Scheme 73

Scheme 73

Scheme 74

Scheme 74: SYSTEM DIAGRAM

Scheme 75

Scheme 75

Scheme 76

Scheme 76
  1. SIGNAL COMMUNICATION TABLE Driver Side Power Seat (with Memory) SIGNAL COMMUNICATION CHART Transmitting ECU (Transmitter) Receiving ECU Signals Communication method HV control ECU Power seat control switch and ECU Shift position P signal CAN - BEAN Power window regulator switch assembly Power seat control switch and ECU Seat memory switch signal BEAN Power seat control switch and ECU Outer mirror control ECU assembly M1 switch memory command signal M2 switch memory command signal M1 switch regeneration command signal M2 switch regeneration command signal BEAN Power seat control switch and ECU Multiplex tilt and telescopic ECU M1 switch memory command signal M2 switch memory command signal M1 switch regeneration command signal M2 switch regeneration command signal BEAN Body ECU Power seat control switch and ECU Driver side door courtesy light switch signal Key unlock warning switch signal Ignition switch signal BEAN
  1. GENERAL PRECAUTION When using the battery during inspection, do not bring the positive and negative tester probes too close to each other as a short circuit may occur.
  2. PRECAUTION OF DISCONNECTING BATTERY TERMINAL NOTE: When disconnecting the negative (-) battery cable, initialize the following system(s) after the cable is reconnected. SYSTEM NAME INDEX System Name See procedure Lighting System «INITIALIZATION»(ref-282976-S16822617822008041400000) Power Windows Control System Power Door Lock System Power Back Door System Back Door Closer System Electrical Back Door Outside Handle System SFI System

Scheme 77

Scheme 77: PARTS LOCATION

Scheme 78

Scheme 78: SYSTEM DIAGRAM