SPECIFIED TORQUE FOR STANDARD BOLTS
| Class | Diameter (mm) | Pitch (mm) | Specified torque | |||||
|---|---|---|---|---|---|---|---|---|
| Hexagon head bolt | Hexagon flange bolt | |||||||
| N*m | Kgf*cm | Ft.*lbf | N*m | Kgf*cm | Ft.*lbf | |||
| 4T | 6 | 1 | 5 | 55 | 48 in.*lbf | 6 | 60 | 52 in.*lbf |
| 8 | 1.25 | 12.5 | 130 | 9 | 14 | 145 | 10 | |
| 10 | 1.25 | 26 | 260 | 19 | 29 | 290 | 21 | |
| 12 | 1.25 | 47 | 480 | 35 | 53 | 540 | 39 | |
| 14 | 1.5 | 74 | 760 | 55 | 84 | 850 | 61 | |
| 16 | 1.5 | 115 | 1,150 | 83 | ||||
| 5T | 6 | 1 | 6.5 | 65 | 56 in.*lbf | 7.5 | 75 | 65 in.*lbf |
| 8 | 1.25 | 15.5 | 160 | 12 | 17.5 | 175 | 13 | |
| 10 | 1.25 | 32 | 330 | 24 | 36 | 360 | 26 | |
| 12 | 1.25 | 59 | 600 | 43 | 65 | 670 | 48 | |
| 14 | 1.5 | 91 | 930 | 67 | 100 | 1,050 | 76 | |
| 16 | 1.5 | 140 | 1,400 | 101 | ||||
| 6T | 6 | 1 | 8 | 80 | 69 in.*lbf | 9 | 90 | 78 in.*lbf |
| 8 | 1.25 | 19 | 195 | 14 | 21 | 210 | 15 | |
| 10 | 1.25 | 39 | 400 | 29 | 44 | 440 | 32 | |
| 12 | 1.25 | 71 | 730 | 53 | 80 | 810 | 59 | |
| 14 | 1.5 | 110 | 1,100 | 80 | 125 | 1,250 | 90 | |
| 16 | 1.5 | 170 | 1,750 | 127 | ||||
| 7T | 6 | 1 | 10.5 | 110 | 8 | 12 | 120 | 9 |
| 8 | 1.25 | 25 | 260 | 19 | 28 | 290 | 21 | |
| 10 | 1.25 | 52 | 530 | 38 | 58 | 590 | 43 | |
| 12 | 1.25 | 95 | 970 | 70 | 105 | 1,050 | 76 | |
| 14 | 1.5 | 145 | 1,500 | 108 | 165 | 1,700 | 123 | |
| 16 | 1.5 | 230 | 2,300 | 166 | ||||
| 8T | 8 | 1.25 | 29 | 300 | 22 | 33 | 330 | 24 |
| 10 | 1.25 | 61 | 620 | 45 | 68 | 690 | 50 | |
| 12 | 1.25 | 110 | 1,100 | 80 | 120 | 1,250 | 90 | |
| 9T | 8 | 1.25 | 34 | 340 | 25 | 37 | 380 | 27 |
| 10 | 1.25 | 70 | 710 | 51 | 78 | 790 | 57 | |
| 12 | 1.25 | 125 | 1,300 | 94 | 140 | 1,450 | 105 | |
| 10T | 8 | 1.25 | 38 | 390 | 28 | 42 | 430 | 31 |
| 10 | 1.25 | 78 | 800 | 58 | 88 | 890 | 64 | |
| 12 | 1.25 | 140 | 1,450 | 105 | 155 | 1,600 | 116 | |
| 11T | 8 | 1.25 | 42 | 430 | 31 | 47 | 480 | 35 |
| 10 | 1.25 | 87 | 890 | 64 | 97 | 990 | 72 | |
| 12 | 1.25 | 155 | 1,600 | 116 | 175 | 1,800 | 130 | |
SPECIFIED TORQUE FOR STANDARD BOLTS SPECIFICATION
TORQUE SPECIFICATIONS
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Throttle body assembly x Intake air connector | 11 | 112 | 8 |
| Knock sensor x Cylinder block sub-assembly | 20 | 199 | 15 |
| Water outlet x Cylinder head sub-assembly | 15 | 153 | 11 |
| Intake manifold x Cylinder head sub-assembly | 15 | 153 | 11 |
| Ground cable x Intake manifold | 8.4 | 86 | 71 in.*lbf |
| Camshaft timing oil control valve assembly (for Bank 1) x Cylinder head | 8.0 | 82 | 71 in.*lbf |
| Camshaft timing oil control valve assembly (for Bank 2) x Cylinder head | 8.0 | 82 | 71 in.*lbf |
| Crank shaft position sensor x Oil pump | 8.0 | 80 | 71 in.*lbf |
| Air cleaner case w/ resonator x Air cleaner bracket | 5.0 | 51 | 44 in.*lbf |
| Air cleaner cap w/ inlet x Radiator support sub-assembly upper | 7.0 | 71 | 62 in.*lbf |
| Intake air surge tank x Intake manifold | 28 | 286 | 21 |
| Surge tank stay No.2 x Intake air surge tank | 20 | 199 | 14 |
| Surge tank stay No.1 x Intake air surge tank | 20 | 199 | 14 |
| Engine hunger No.1 x Intake air surge tank | 20 | 199 | 14 |
| Emission control valve set x Intake air surge tank | 8.0 | 82 | 71 in.*lbf |
TORQUE SPECIFICATIONS - 3MZ-FE ENGINE CONTROL SYSTEM
| Part Tightened | N*m | Kgf*cm | Ft.*lbf | |
|---|---|---|---|---|
| Front wheel | 103 | 1,050 | 76 | |
| Engine wire harness x Cylinder head cover | 8.4 | 85 | 74 in.*lbf | |
| Engine wire harness protector x Cylinder head cover | 8.4 | 85 | 74 in.*lbf | |
| Ignition coil assembly x Cylinder head cover | 8.0 | 80 | 71 in.*lbf | |
| Intake air surge tank x Intake manifold | 28 | 286 | 21 | |
| Surge tank stay No.2 x Intake air control valve assembly | 20 | 200 | 14 | |
| Surge tank stay No.2 x Cylinder head | 20 | 200 | 14 | |
| Surge tank stay No.1 x Intake air surge tank | 20 | 200 | 14 | |
| Surge tank stay No.1 x Cylinder head | 20 | 200 | 14 | |
| Engine hanger No.1 x Intake air surge tank | 20 | 200 | 14 | |
| Engine hanger No.1 x Cylinder head | 20 | 200 | 14 | |
| Emission control valve set x Emission control valve bracket | 8.0 | 82 | 71 in.*lbf | |
| Engine hanger No.2 x Cylinder head | 20 | 200 | 14 | |
| Engine oil pressure switch assembly x Cylinder block | 15 | 153 | 11 | |
| Engine mounting bracket RH x Cylinder block | 54 | 551 | 40 | |
| Manifold stay No.2 x Cylinder block | 49 | 500 | 36 | |
| Engine mounting bracket RR x Cylinder block | 64 | 653 | 47 | |
| Engine mounting insulator RH x Engine mounting bracket RH | 95 | 969 | 70 | |
| Engine mounting insulator LH x Automatic transaxle assembly | 95 | 969 | 70 | |
| Engine mounting insulator FR x Engine mounting bracket FR | 87 | 887 | 64 | |
| Engine mounting insulator RR x Engine mounting bracket RR | 75 | 765 | 55 | |
| Frame side rail plate sub-assembly x Front frame assembly | Bolt A | 85 | 867 | 63 |
| Bolt B | 32 | 326 | 24 | |
| Nut | 32 | 326 | 24 | |
| Front suspension member brace rear x Front frame assembly | Bolt C | 85 | 867 | 63 |
| Bolt D | 32 | 326 | 24 | |
| Nut | 32 | 326 | 24 | |
| Engine mounting stay No.2 RH x Engine mounting bracket RH | 64 | 653 | 47 | |
| Engine moving control rod | Bolt A to C | 64 | 653 | 47 |
| Bolt D | 23 | 235 | 17 | |
| Exhaust manifold converter sub-assembly x Cylinder head | 49 | 500 | 36 | |
| Manifold stay x Exhaust manifold converter sub-assembly | 34 | 347 | 25 | |
| Manifold stay x Automatic transaxle assembly | 34 | 347 | 25 | |
| Exhaust manifold heat insulator No.1 x Exhaust manifold converter sub-assembly | 8.5 | 87 | 75 in.*lbf | |
| Water outlet x Cylinder head | 15 | 153 | 11 | |
| Intake manifold x Cylinder head | 15 | 153 | 11 | |
| Ground cable x Intake manifold | 8.4 | 86 | 74 in.*lbf | |
| Wire harness clamp bracket x Cylinder head | 5.4 | 55 | 48 in.*lbf | |
| Ground cable x Cylinder head | 5.4 | 55 | 48 in.*lbf | |
| Exhaust manifold converter sub-assembly No.2 x Cylinder head | 49 | 500 | 36 | |
| Exhaust manifold heat insulator No.2 x Exhaust manifold converter sub-assembly No.2 | 8.5 | 87 | 75 in.*lbf | |
| Manifold converter insulator No.3 x Exhaust manifold converter sub-assembly No.2 | 8.5 | 87 | 75 in.*lbf | |
| Air cleaner case w/ resonator x Air cleaner bracket | 5.0 | 51 | 44 in.*lbf | |
| Air cleaner cap w/ inlet x Radiator support sub-assembly upper | 7.0 | 71 | 62 in.*lbf | |
| Battery clamp x Body | 5.4 | 55 | 48 in.*lbf | |
| Battery carrier sub-assembly x Body | 19 | 194 | 14 | |
| Brake master cylinder reservoir sub-assembly x Reservoir bracket | 9.0 | 92 | 80 in.*lbf | |
| Air cleaner bracket x Water outlet | 15 | 153 | 11 | |
| Compressor w/ motor assembly x Compressor mounting bracket No.1 | 25 | 250 | 18 | |
| Cooling fan ECU x Fan shroud | 2.6 | 26 | 23 in.*lbf | |
| Transmission control cable bracket x Shift lever position sensor | 6.9 | 70 | 61 in.*lbf | |
| Heater water pump bracket x Heater water pump | 5.4 | 55 | 48 in.*lbf | |
| Inverter bracket No.1 x Hybrid transaxle | 21 | 214 | 15 | |
| Transmission input damper assembly x Fly wheel sub-assembly | 30 | 306 | 22 | |
| Fly wheel sub-assembly x Crankshaft | 83 | 846 | 61 | |
| Engine mounting stay bracket x Cylinder block | 52 | 530 | 38 | |
| Compressor mounting bracket No.1 x Cylinder block | 25 | 250 | 18 | |
| Intake air connector bracket No.2 x Cylinder head | 7.0 | 71 | 62 in.*lbf | |
| Ventilation valve sub-assembly x Cylinder head cover sub-assembly | 27 | 275 | 20 | |
| Spark plug x Cylinder head assembly | 25 | 255 | 18 | |
| Cylinder head cover x Cylinder head assembly | 12.0 | 122 | 9 in.*lbf | |
| Oil level gage guide x Cylinder block assembly | 8.0 | 82 | 71 in.*lbf | |
| VVT sensor x Cylinder head assembly | 8.0 | 82 | 71 in.*lbf | |
| Camshaft timing oil control valve assembly x Cylinder head assembly | 8.0 | 82 | 71 in.*lbf | |
| Timing belt tensioner assembly x Oil pump assembly | 27 | 275 | 20 | |
| Timing belt No.2 cover x Timing belt No.3 cover | 9.0 | 92 | 80 in.*lbf | |
| Timing belt No.1 cover x Oil pump assembly | 9.0 | 92 | 80 in.*lbf | |
| Crankshaft pulley x Crankshaft | 220 | 2,243 | 162 | |
| Timing belt plate x Oil pump assembly | 8.0 | 82 | 71 in.*lbf | |
| Water pump assembly x Cylinder block assembly | 8.0 | 82 | 71 in.*lbf | |
| Timing belt idler bracket x Cylinder block assembly | 28 | 286 | 21 | |
| Timing belt No.3 cover x Cylinder head assembly | 9.0 | 92 | 80 in.*lbf | |
| Timing belt idler sub-assembly No.2 x Timing belt idler bracket | 43 | 438 | 32 | |
| Timing belt idler sub-assembly No.1 x Cylinder block assembly | 34 | 347 | 25 | |
| Crank position sensor x Oil pump assembly | 8.0 | 82 | 71 in.*lbf | |
| Camshaft timing pulley x Camshaft | 125 | 1,275 | 92 | |
| Cylinder head assembly x Cylinder block assembly | 12 pointed head 1st | 54 | 551 | 40 |
| 2nd | Turn 90° | Turn 90° | Turn 90° | |
| Recessed head | 19 | 189 | 14 | |
| Camshaft timing gear assembly (VVT-i) x Camshaft | 150 | 1,530 | 111 | |
| Camshaft bearing cap x Cylinder head assembly | 16 | 163 | 12 | |
| Oil control valve filter x Cylinder head assembly | 45 | 459 | 33 | |
| Cylinder head cover rear x Cylinder head assembly | 10 | 102 | 7 | |
| Engine hanger No.2 x Cylinder head LH | 20 | 204 | 15 | |
| Engine rear oil seal retainer x Cylinder block | 8.0 | 82 | 71 in.*lbf | |
| Oil pump assembly x Cylinder block assembly | For bolt A | 8.0 | 82 | 71 in.*lbf |
| For bolt B | 20 | 204 | 15 | |
| For bolt C | 43 | 438 | 32 | |
| Oil pan sub-assembly x Cylinder block | 10 mm head | 8.0 | 82 | 71 in.*lbf |
| 12 mm head | 20 | 204 | 15 | |
| Oil strainer sub-assembly x Oil pan sub-assembly | 8.0 | 82 | 71 in.*lbf | |
| Oil pan sub-assembly No.2 x Oil pan sub-assembly | 8.0 | 82 | 71 in.*lbf | |
| Oil pan drain plug x Oil pan sub-assembly No.2 | 45 | 459 | 33 | |
| Water inlet housing x Cylinder block | 8.0 | 82 | 71 in.*lbf | |
| Oil filter union x Cylinder block assembly | 30 | 306 | 22 | |
| Camshaft sub-gear x Main gear | 5.0 | 51 | 44 in.*lbf | |
| Engine mounting bracket RH x Cylinder block | 28 | 286 | 21 | |
| W/ head straight screw plug No.1 x Cylinder head assembly | 44 | 449 | 32 | |
| W/ head straight screw plug No.2 x Cylinder head assembly | 44 | 449 | 32 | |
| Oil pan baffle plate x Oil pan sub-assembly | 8.0 | 82 | 71 in.*lbf | |
| Connecting rod cap x Connecting rod | 1st | 25 | 255 | 18 |
| 2nd | Turn 90° | Turn 90° | Turn 90° | |
| Cylinder block water drain cock sub-assembly x Cylinder block | 39 | 398 | 29 | |
| Cylinder block w/ head straight screw plug No.1 x Cylinder block | 30 | 306 | 22 | |
| Cylinder block w/ head straight screw plug No.2 x Cylinder block | 30 | 306 | 22 | |
| Cylinder block w/ head straight screw plug No.3 x Cylinder block | 50 | 510 | 37 | |
| Water seal plate x Cylinder block | 18 | 184 | 13 | |
| Crankshaft bearing cap x Cylinder block assembly | 12 pointed head 1st | 22 | 224 | 16 |
| 2nd | Turn 90° | Turn 90° | Turn 90° | |
| 6 pointed head | 27 | 275 | 20 | |
| Bearing cap bolt x Crankshaft berating cap | 27 | 275 | 20 | |
TORQUE SPECIFICATIONS - 3MZ-FE ENGINE MECHANICAL
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Fuel delivery pipe sub-assembly x Intake manifold | 10 | 102 | 7 |
| Fuel delivery pipe No.2 x Intake manifold | 10 | 102 | 7 |
| Fuel pipe No.2 union bolt x Fuel delivery pipe No.2 | 33 | 331 | 24 |
| Fuel pressure pulsation damper assembly x Fuel delivery pipe sub-assembly | 33 | 331 | 24 |
| Fuel pipe sub-assembly No.1 x Intake manifold | 20 | 199 | 14 |
| Fuel vapor containment valve set nut | 8.0 | 82 | 71 in.*lbf |
| Fuel tank vent tube set plate x Fuel tank | 6.0 | 61 | 53 in.*lbf |
| Fuel tank band sub-assembly x Body | 39 | 400 | 29 |
| Charcoal canister protector set bolt | 5.4 | 55 | 48 in.*lbf |
| Parking brake cable assembly No.3 set nut | 6.0 | 61 | 53 in.*lbf |
| Front floor heat insulator No.3 Set nut | 4.9 | 50 | 43 in.*lbf |
TORQUE SPECIFICATIONS - 3MZ-FE FUEL
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Charcoal canister assembly x Body | 5.4 | 55 | 48 in.*lbf |
| Charcoal canister protector x Charcoal canister assembly | 5.4 | 55 | 48 in.*lbf |
| Air fuel ratio sensor (for Bank1) x Exhaust manifold converter sub-assembly | 44 | 449 | 32 |
| Air fuel ratio sensor (for Bank2) x Exhaust manifold converter sub-assembly No.2 | 44 | 449 | 32 |
| Oxygen sensor (for Bank1) x Exhaust pipe sub-assembly front No.3 | 44 | 449 | 32 |
| Oxygen sensor (for Bank2) x Exhaust pipe sub-assembly front | 44 | 449 | 32 |
| Fuel vapor containment valve x Fuel tank | 8.0 | 82 | 71 in.*lbf |
TORQUE SPECIFICATIONS - 3MZ-FE EMISSION CONTROL
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Exhaust pipe assembly front x Exhaust manifold converter sub-assembly No.2 | 56 | 571 | 41 |
| Exhaust pipe sub-assembly front No.3 x Exhaust manifold converter sub-assembly | 56 | 571 | 41 |
| Exhaust pipe sub-assembly front No.3 x Exhaust pipe assembly front | 56 | 571 | 41 |
| Exhaust pipe assembly center x Exhaust pipe sub-assembly front No.3 | 48 | 490 | 35 |
| Exhaust pipe assembly center x Exhaust pipe assembly tail | 48 | 490 | 35 |
| Heated oxygen sensor x Exhaust pipe assembly front | 44 | 449 | 32 |
| Heated oxygen sensor x Exhaust pipe sub-assembly front No.3 | 44 | 449 | 32 |
| Exhaust pipe damper x Exhaust pipe assembly center | 19 | 194 | 14 |
TORQUE SPECIFICATIONS - 3MZ-FE EXHAUST
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Water pump assembly x Cylinder block | 8.0 | 82 | 71 in.*lbf |
| Timing belt idler sub-assembly No.1 x Cylinder block | 34 | 347 | 25 |
| Water inlet x Water inlet housing | 8.0 | 82 | 71 in.*lbf |
| Water inlet pipe (TMC MADE) x Cylinder head | 20 | 204 | 154 |
| Cylinder block drain cock plug x Cylinder block drain cock | 13 | 133 | 9 |
| Radiator assembly x Radiator support lower | 5.0 | 51 | 44 in.*lbf |
| Radiator assembly x Radiator support upper (Bolt A) | 5.0 | 51 | 44 in.*lbf |
| Radiator assembly x Radiator support upper (Bolt B) | 3.9 | 40 | 35 in.*lbf |
| Radiator support sub-assembly upper x Body | 7.0 | 71 | 62 in.*lbf |
| Radiator support sub-assembly upper x Suction tube | 9.8 | 100 | 87 in.*lbf |
| Hood lock assembly x Radiator support sub-assembly upper | 8.0 | 82 | 71 in.*lbf |
| Fan shroud x No.2 radiator assembly | 7.8 | 80 | 69 in.*lbf |
TORQUE SPECIFICATIONS - 3MZ-FE COOLING
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Engine oil pressure switch x Cylinder block | 15 | 153 | 11 |
| Oil pan drain plug x Oil pan sub-assembly No.2 | 45 | 459 | 33 |
| Oil pump cover x Oil pump body | 10 | 105 | 8 |
| Oil pump relief valve plug x Oil pump body | 49 | 500 | 36 |
| Oil pump assembly x Cylinder block (Bolt A) | 8.0 | 82 | 71 in.*lbf |
| Oil pump assembly x Cylinder block (Bolt B) | 20 | 199 | 14 |
| Oil pump assembly x Cylinder block (Bolt C) | 43 | 439 | 32 |
| Oil pan sub-assembly x Cylinder block (Bolt A) | 8.0 | 82 | 71 in.*lbf |
| Oil pan sub-assembly x Cylinder block (Bolt B) | 20 | 199 | 14 |
| Oil strainer sub-assembly x Oil pan sub-assembly | 8.0 | 82 | 71 in.*lbf |
| Oil pan sub-assembly x Oil pan sub-assembly | 8.0 | 82 | 71 in.*lbf |
TORQUE SPECIFICATIONS - 3MZ-FE LUBRICATION
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Spark plug x Cylinder head | 25 | 250 | 18 |
| Ignition coil x Cylinder head cover | 8.0 | 82 | 72 in.*lbf |
| VVT sensor (for Bank1) x Cylinder head cover | 8.0 | 82 | 72 in.*lbf |
| VVT sensor (for Bank 2) x Cylinder head cover | 8.0 | 82 | 72 in.*lbf |
TORQUE SPECIFICATIONS - 3MZ-FE IGNITION
| Part Tightened | N*m | Kgf*cm | Ft.*lbf | |
|---|---|---|---|---|
| W/ converter inverter x Inverter bracket | 21 | 214 | 15 | |
| Inverter bracket No.4 x W/ converter inverter | 21 | 214 | 15 | |
| No.3 wire frame x W/ converter inverter | 10 | 102 | 7 | |
| High voltage cable of front motor x W/ converter inverter | 10 | 102 | 7 | |
| Engine wire No.4 x W/ converter inverter | 5.4 | 55 | 48 in.*lbf | |
| Inverter cover x W/ converter inverter | 10 | 102 | 7 | |
| Interlock bracket x W/ converter inverter | 10 | 102 | 7 | |
| Power steering ECU bracket x W/ converter inverter | 8.0 | 82 | 71 in.*lbf | |
| Inverter reserve tank sub-assembly x W/ converter inverter | 10 | 102 | 7 | |
| Engine room wire No.2 x Fusible link block assembly | 8.5 | 87 | 75 in.*lbf | |
| Hybrid vehicle control ECU x Body | 5.5 | 56 | 49 in.*lbf | |
| Water w/ motor and bracket pump assembly x Body | 7.0 | 71 | 62 in.*lbf | |
| Frame side rail plate sub-assembly LH x Body | ||||
| Bolt A | 85 | 867 | 63 | |
| Bolt B | 32 | 326 | 24 | |
| Nut | 32 | 326 | 24 | |
| Radiator assembly x Condenser assembly | 5.0 | 51 | 44 in.*lbf | |
| Hood lock support sub-assembly x Body | 7.0 | 71 | 62 in.*lbf | |
| Accelerator pedal rod assembly x Floor | 4.9 | 50 | 43 in.*lbf | |
| Circuit breaker sensor No.1 x W/ converter inverter | 8.0 | 82 | 70 in.*lbf | |
| Rear circuit breaker sensor x Floor | 8.0 | 82 | 70 in.*lbf | |
| No.3 wire frame x Body | 8.5 | 87 | 75 in.*lbf | |
| No.3 wire frame x Hybrid vehicle relay | 9.0 | 92 | 80 in.*lbf | |
| No.3 wire frame x Battery cover assembly | 8.0 | 82 | 72 in.*lbf | |
| No.3 wire frame x Power steering converter assembly | 5.5 | 56 | 49 in.*lbf | |
TORQUE SPECIFICATIONS - P310 HYBRID VEHICLE CONTROL
| Part Tightened | N*m | Kgf*cm | Ft.*lbf | |
|---|---|---|---|---|
| Hybrid vehicle relay x Battery lower case | 4.5 | 46 | 40 in.*lbf | |
| Electric vehicle battery plug x Battery lower case | ||||
| Bolt | 5.4 | 55 | 48 in.*lbf | |
| Nut | 7.5 | 76 | 66 in.*lbf | |
| Battery cooling blower assembly x Battery lower case | 4.5 | 46 | 40 in.*lbf | |
| Main battery cable x HV battery | 5.4 | 55 | 48 in.*lbf | |
| Main battery cable No.2 x HV battery | 5.4 | 55 | 48 in.*lbf | |
| Main battery cable x Battery lower case | 7.5 | 76 | 66 in.*lbf | |
| EV battery plug x HV battery | 5.4 | 55 | 48 in.*lbf | |
| Battery cover assembly x Battery lower case | ||||
| Bolt A | 25 | 255 | 19 | |
| Bolt B | 22 | 224 | 16 | |
| Bolt C | 7.5 | 76 | 66 in.*lbf | |
| Nut | 7.5 | 76 | 66 in.*lbf | |
| No.3 wire frame x Battery cover assembly | 8.0 | 82 | 72 in.*lbf | |
| Battery carrier duct x Battery cover assembly | 7.5 | 76 | 66 in.*lbf | |
| Battery carrier bracket x Battery cover assembly | 7.5 | 76 | 66 in.*lbf | |
| Battery smart unit x Battery lower case | 7.5 | 76 | 66 in.*lbf | |
| No.3 wire frame x Hybrid vehicle relay | 9.0 | 92 | 80 in.*lbf | |
| Electric vehicle fuse x EV battery plug | 5.4 | 55 | 48 in.*lbf | |
TORQUE SPECIFICATIONS - P310 HYBRID BATTERY CONTROL
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Hybrid transaxle x Pump cover plug | 8.0 | 82 | 71 in.*lbf |
| Park neutral position switch x Hybrid transaxle | 13 | 133 | 10 |
| Floor shift assembly x Vehicle | 12 | 122 | 9 |
| Front seat armrest assembly center x Front seat assembly | 37 | 377 | 27 |
| Transaxle control cable assembly x Body | 5.5 | 56 | 49 |
| Transaxle control cable end x Control shaft lever | 15 | 150 | 11 |
| Transaxle x Drain plug (Fluid) | 39 | 398 | 29 |
| Transaxle x Filler plug (Fluid) | 39 | 398 | 29 |
| Transaxle x Drain plug (Coolant) | 39 | 398 | 29 |
| Park/neutral position switch x Lock nut | 6.9 | 70 | 61 in.*lbf |
| Park/neutral position switch x Control shaft | 6.9 | 70 | 61 in.*lbf |
| Oil cooler inlet tube x Transaxle | 34 | 350 | 25 |
| Control cable bracket x Oil cooler tube bracket | 8.2 | 84 | 73 in.*lbf |
| Oil pump x Body | 7.0 | 71 | 62 in.*lbf |
| Oil No.1 cooler x Air duct | 4.9 | 50 | 43 in.*lbf |
| Oil cooler x Water pump bracket | 4.9 | 50 | 43 in.*lbf |
| Engine x Transaxle (Bolt A) | 64 | 653 | 47 |
| Engine x Transaxle (Bolt B) | 46 | 469 | 34 |
| Engine x Transaxle (Bolt C) | 64 | 653 | 47 |
| Engine x Transaxle (Bolt D) | 37 | 377 | 27 |
| Oil cooler tube clamp x Oil cooler tube bracket | 7.0 | 71 | 62 in.*lbf |
| Transaxle x Engine mounting bracket | 64 | 653 | 47 |
| Transaxle x Transmission case cover | 8.4 | 86 | 74 in.*lbf |
| Wire harness bracket x Transaxle | 8.4 | 86 | 74 in.*lbf |
| Transaxle x Ground wire | 8.4 | 86 | 74 in.*lbf |
| Transaxle x Flywheel housing under cover | 7.8 | 80 | 69 in.*lbf |
TORQUE SPECIFICATIONS - P310 HYBRID TRANSMISSION / TRANSAXLE
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Drain plug x Rear traction motor | 39 | 398 | 29 |
| Filler plug x Rear traction motor | 39 | 398 | 29 |
| Hybrid transaxle mass damper x Rear traction motor | 55 | 561 | 41 |
| Extension wire clamp bracket x Rear traction motor | 5.5 | 56 | 49 in.*lbf |
| Ground wire x Rear traction motor | 5.5 | 56 | 49 in.*lbf |
| Extension wire x Rear traction motor | 10 | 102 | 7 |
| Differential support assembly front x Rear traction motor | 80 | 816 | 59 |
| Rear traction motor x Rear suspension member (Bolt A) | 95 | 969 | 70 |
| Rear traction motor x Rear suspension member (Bolt B) | 103 | 1,050 | 76 |
| Rear suspension member x Vehicle (Nut A) | 115 | 1,173 | 85 |
| Rear suspension member x Vehicle (Nut B) | 181 | 1,846 | 134 |
| No.3 wire frame x Rear traction motor | 15 | 153 | 11 |
| No.3 wire harness clamp x Vehicle | 8.5 | 87 | 75 in.*lbf |
| Ground cable x Extension wire clamp bracket | 5.5 | 56 | 49 in.*lbf |
| Parking brake No.3 cable x Vehicle | 6.0 | 61 | 53 in.*lbf |
| Rear suspension arm assembly No.2 x Rear axle carrier | 112 | 1,140 | 83 |
| Height control sensor link x Rear suspension arm assembly No.2 | 5.4 | 55 | 48 in.*lbf |
| Rear suspension arm assembly No.1 x Rear axle carrier | 112 | 1,140 | 83 |
| Strut rod assembly rear x Rear axle carrier | 80 | 816 | 59 |
| Inverter reserve tank sub-assembly x w/ converter inverter assembly | 10 | 102 | 7 |
TORQUE SPECIFICATIONS - Q211 HYBRID TRANSMISSION / TRANSAXLE
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Front wheel set nut | 103 | 1,050 | 76 |
| Front drive shaft x Front axle hub nut | 294 | 3,000 | 217 |
| Front speed sensor x Steering knuckle | 8.0 | 82 | 71 in.*lbf |
| Front speed sensor wire x Front shock absorber | 19 | 192 | 14 |
| Front suspension arm sub-assembly lower No.1 x Lower ball joint | 127 | 1,300 | 94 |
| Front drive shaft bearing set bolt | 32 | 330 | 24 |
| Rear wheel set nut | 103 | 1,050 | 76 |
| Rear drive shaft assembly x Rear axle shaft nut | 294 | 3,000 | 217 |
| Rear drive shaft assembly x Differential side gear shaft sub-assembly | 56 | 571 | 41 |
TORQUE SPECIFICATIONS - DRIVE SHAFT
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Front wheel set bolt | 103 | 1,050 | 76 |
| Steering knuckle x Tie rod assembly | 49 | 500 | 36 |
| Steering knuckle x Front shock absorber | 290 | 3,000 | 217 |
| Steering knuckle x Front disc brake dust cover | 8.3 | 85 | 73 in.*lbf |
| Steering knuckle x Front disc brake caliper assembly | 104 | 1,060 | 77 |
| Front drive shaft x Front axle hub nut | 294 | 3,000 | 217 |
| Rear wheel set nut | 103 | 1,050 | 76 |
| Rear drive shaft x Rear axle shaft nut | 294 | 3,000 | 217 |
| Rear axle carrier sub-assembly x Rear disc brake caliper assembly | 78 | 795 | 58 |
| Rear axle carrier sub-assembly x Rear axle hub and bearing assembly | 75 | 765 | 55 |
| Parking brake cable assembly x Body | 6.0 | 61 | 53 in.*lbf |
| Rear axle carrier sub-assembly x Rear strut rod assembly | 80 | 816 | 59 |
| Rear strut rod assembly x Body | 80 | 816 | 59 |
| Rear axle carrier sub-assembly x Rear suspension arm assembly No.1 | 112 | 1,140 | 83 |
| Rear axle carrier sub-assembly x Rear suspension arm assembly No.2 | 112 | 1,140 | 83 |
| Rear axle carrier sub-assembly x Rear speed sensor (4WD) | 8.0 | 82 | 71 in.*lbf |
| Rear axle carrier sub-assembly x Rear shock absorber | 180 | 1,840 | 133 |
TORQUE SPECIFICATIONS - AXLE
| Part tighten | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| FRONT | |||
| Tie rod end lock nut | 74 | 755 | 55 |
| Suspension support x Body | 80 | 816 | 59 |
| Shock absorber x Axle | 290 | 2,960 | 214 |
| Speed sensor wire harness x Shock absorber | 19 | 194 | 14 |
| Piston rod x Suspension support | 49 | 500 | 36 |
| Stabilizer link x Shock absorber | 74 | 755 | 55 |
| Hub nut | 103 | 1,050 | 76 |
| Suspension No.1 lower arm x Frame | A 200 B 206 | A 2,040 B 2,100 | A 148 B152 |
| Engine mounting insulator x Frame | 87 | 887 | 64 |
| Lower ball joint x Steering knuckle | 123 | 1,250 | 91 |
| Stabilizer bracket No.1 x Frame | 16 | 163 | 12 |
| Stabilizer link x Stabilizer bar | 74 | 755 | 55 |
| REAR | |||
| Suspension No.2 arm lock nut | 56 | 571 | 41 |
| Suspension support x Body | 58 | 591 | 43 |
| Shock absorber x Axle carrier | 180 | 1,840 | 133 |
| Piston rod x Suspension support | 49 | 500 | 36 |
| Speed sensor wire harness x Shock absorber | 5.0 | 51 | 44 in.*lbf |
| Flexible hose x Shock absorber | 19 | 194 | 14 |
| Speed sensor x Axle carrier | 8.0 | 82 | 71 in.*lbf |
| Stabilizer link x Shock absorber | 39 | 398 | 29 |
| Hub nut | 103 | 1,050 | 76 |
| Strut rod x Axle carrier | 80 | 816 | 59 |
| Strut rod x Body | 80 | 816 | 59 |
| Parking brake No.3 cable x Body | 6.0 | 61 | 53 in.*lbf |
| Suspension No.1 arm x Suspension member | 2WD 120 4WD 80 | 2WD 1,220 4WD 816 | 2WD 89 4WD 59 |
| Suspension No.1 arm x Axle carrier | 2WD 112 4WD 112 | 2WD 1,140 4WD 1,140 | 2WD 83 4WD 83 |
| Suspension No.2 arm x Suspension member | 2WD 120 4WD 100 | 2WD 1,220 4WD 1,020 | 2WD 89 4WD 74 |
| Suspension No.2 arm x Axle carrier | 2WD 112 4WD 112 | 2WD 1,140 4WD 1,140 | 2WD 83 4WD 83 |
| Stabilizer bracket x Suspension member | 19 | 194 | 14 |
| Stabilizer link x Stabilizer bar | 39 | 398 | 29 |
| Stabilizer bar x Suspension member | Left 54 Right 19 | Left 551 Right 194 | Left 40 Right 14 |
TORQUE SPECIFICATIONS - SUSPENSION
TIRE PRESSURE WARNING RECEIVER
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Tire pressure warning receiver set bolt | 7.5 | 77 | 66 in.*lbf |
TORQUE SPECIFICATIONS - TIRE PRESSURE WARNING RECEIVER
TIRE PRESSURE WARNING VALVE AND TRANSMITTER
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Tire pressure warning valve and transmitter set nut | 4.0 | 41 | 35 in.*lbf |
| Front wheel set nuts | 103 | 1,050 | 76 |
| Rear wheel set nuts | 103 | 1,050 | 76 |
TORQUE SPECIFICATIONS - TIRE PRESSURE WARNING VALVE AND TRANSMITTER
| Part Tightened | N*m | Kgf*cm | Ft.*lbf | |
|---|---|---|---|---|
| Front speed sensor wire harness clamp x Body | 5.0 | 51 | 44 in.*lbf | |
| Front speed sensor wire harness clamp x Shock absorber | 19 | 194 | 14 | |
| Front speed sensor x Steering knuckle | 8.0 | 82 | 71 in.*lbf | |
| Rear speed sensor wire harness clamp x Body | 5.0 | 51 | 44 in.*lbf | |
| Rear speed sensor x Rear axle | 4WD | 8.0 | 82 | 71 in.*lbf |
| Yaw rate sensor x Body | 13.5 | 138 | 10 | |
| Skid control ECU assembly x Body | 5.0 | 51 | 44 in.*lbf | |
| Brake control power supply assembly with bracket x Body | 5.0 | 51 | 44 in.*lbf | |
| Brake control power supply assembly x Bracket | 5.0 | 5.0 | 44 in.*lbf | |
| Brake pedal stroke sensor assembly x Pedal support assembly | 9.3 | 95 | 82 in.*lbf | |
| Brake actuator assembly x Brake tube | 15 | 155 | 11 | |
| Brake actuator assembly x Brake actuator bracket No.7 with clamp | 19 | 194 | 14 | |
| Brake actuator assembly x Brake actuator bracket assembly | 8.0 | 82 | 71 in.*lbf | |
| Brake actuator assembly with brake actuator bracket assembly x bracket | 19 | 194 | 14 | |
| Brake master cylinder reservoir sub-assembly x Braket | 9.0 | 92 | 80 in.*lbf | |
| Brake tube clamp x Body | 5.0 | 51 | 44 in.*lbf | |
| Brake tube x Front flexible hose | 15 | 155 | 11 | |
TORQUE SPECIFICATIONS - BRAKE CONTROL
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Bleeder plug | 8.3 | 85 | 73 in.*lbf |
| Brake booster clevis lock nut | 26 | 265 | 19 |
| Brake pedal sub-assembly set bolt | 37 | 375 | 27 |
| Stop light lock nut | 16.7 | 170 | 12 |
| Brake pedal assembly x Reinforcement | 44 | 449 | 33 |
| Brake pedal assembly x Body | 12.7 | 130 | 9 |
| Brake pedal assembly x Stroke sensor | 9.3 | 95 | 82 in.*lbf |
| Brake line union nut | 15 | 155 | 11 |
| Wheel nut | 103 | 1,050 | 76 |
| Brake reservoir tube clamp x Body | 5.4 | 55 | 48 in.*lbf |
| Brake stroke simulator x Bracket | 8.0 | 82 | 71 in.*lbf |
| Master cylinder x Bracket | 12.5 | 127 | 9 |
| Driver side knee airbag x Instrument panel | 13 | 130 | 9 |
| Front disc brake cylinder mounting x Steering knuckle | 104 | 1,060 | 78 |
| Front disc brake cylinder x Front brake cylinder mounting | 34 | 350 | 25 |
| Front disc brake cylinder x Flexible hose | 29 | 300 | 21 |
| Front flexible hose x Front shock absorber | 19 | 193 | 14 |
| Rear disc brake cylinder mounting set bolt | 78 | 800 | 56 |
| Rear disc brake cylinder slide pin x Rear disc brake cylinder mounting | 43 | 440 | 32 |
| Rear disc brake cylinder x Flexible hose | 29 | 300 | 21 |
| Rear flexible hose x Rear shock absorber | 19 | 193 | 14 |
TORQUE SPECIFICATIONS - BRAKE
| Part Tightened | N*m | Kgf*cm | Ft.*lbf | |
|---|---|---|---|---|
| Wheel nut | 103 | 1,050 | 76 | |
| Lock nut | 7.0 | 71 | 62 in.*lbf | |
| Parking brake pedal set nut | 39 | 398 | 29 | |
| Parking brake No.1 cable assembly x Body | Nut | 6.0 | 61 | 53 in.*lbf |
| Bolt | 8.5 | 87 | 75 in.*lbf | |
| Parking brake No.3 cable assembly x Body | 8.5 | 87 | 75 in.*lbf | |
| 6.0 | 61 | 53 in.*lbf | ||
| Parking brake No.3 cable assembly x Backing plate | 8.0 | 82 | 71 in.*lbf | |
| Rear disc brake caliper assembly set bolt | 78 | 795 | 58 | |
| Parking brake shoe guide plate set bolt x Backing plate | 18 | 184 | 13 | |
TORQUE SPECIFICATIONS - PARKING BRAKE
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Steering wheel set nut | 50 | 510 | 37 |
| Steering column assembly set bolts | 26 | 265 | 19 |
| Steering column assembly set nuts | 26 | 265 | 19 |
| Steering pad assembly set bolts "Torx" | 8.8 | 90 | 78 in.*lbf |
| Steering column assembly x Steering shaft universal joint assembly | 35 | 360 | 26 |
| Steering shaft universal joint assembly x Steering intermediate shaft assembly | 35 | 360 | 26 |
| Steering intermediate shaft assembly x Power steering link assembly | 35 | 360 | 26 |
| Multiplex tilt and telescopic ECU set screws | 1.5 | 15 | 13 in.*lbf |
TORQUE SPECIFICATIONS - STEERING COLUMN
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Steering wheel set nut | 50 | 510 | 37 |
| Power steering link assembly set bolts | 70 | 714 | 52 |
| Tie rod assembly x Steering knuckle | 49 | 500 | 36 |
| Steering shaft universal joint assembly x Steering intermediate shaft assembly | 35 | 360 | 26 |
| Steering intermediate shaft assembly x Power steering link assembly | 35 | 360 | 26 |
| Steering rack end sub-assembly x Steering rack | 74 (103) | 755 (1,050) | 55 (76) |
| Tie rod assembly lock nuts | 74 | 755 | 55 |
| Ground cable terminal x Power steering ECU assembly | 6.0 | 61 | 53 in.*lbf |
| Inverter bracket No.5 x Power steering ECU assembly | 10 | 102 | 7 |
| Power steering ECU assembly set bolts | 8.0 | 82 | 71 in.*lbf |
| Power steering converter cover set nuts | 5.0 | 51 | 44 in.*lbf |
| DC-DC converter set nuts | 5.0 | 51 | 44 in.*lbf |
| Earth wire x DC-DC converter | 5.5 | 56 | 49 in.*lbf |
TORQUE SPECIFICATIONS - POWER STEERING
(): For use without SST
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| AIR CONDITIONING UNIT | |||
| Air conditioning tube assembly x Cooler evaporator sub-assembly No.1 | 3.5 | 35 | 30 in.*lbf |
| Air duct No.2 x Air conditioning unit | 2.5 | 22 | 22 in.*lbf |
| Instrument panel reinforcement assembly x body | 20 | 204 | 15 |
| Air duct No.1 sub-assembly x body | 9.8 | 100 | 87 in.*lbf |
| Air conditioner unit assembly | 9.8 | 100 | 87 in.*lbf |
| Air duct No.1 x Body | 9.8 | 100 | 87 in.*lbf |
| BLOWER UNIT | |||
| Blower assembly x Instrument panel reinforcement assembly (Bolt:) | 9.8 | 100 | 87 in.*lbf |
| Blower assembly x Body (Nut:) | 9.8 | 100 | 87 in.*lbf |
| Air duct No.2 x Blower assembly | 2.5 | 25 | 22 in.*lbf |
| ELECTRIC INVERTER COMPRESSOR | |||
| Service valve x Electric inverter compressor | 9.8 | 100 | 87 in.*lbf |
| Electric inverter compressor x Body | 25 | 255 | 18 |
| Cooler refrigerant suction hose No.1 x Electric inverter compressor | 9.8 | 100 | 87 in.*lbf |
| Cooler refrigerant discharge hose No.1 x Electric inverter compressor | 9.8 | 100 | 87 in.*lbf |
| CONDENSER | |||
| Cap x cooler condenser assembly | 2.9 | 29 | 25 in.*lbf |
| Cooler condenser assembly x Radiator assembly | 3.9 | 40 | 35 in.*lbf |
| Radiator support upper RH sub-assembly x Radiator assembly (Bolt A:) | 5.0 | 51 | 44 in.*lbf |
| Radiator support upper RH sub-assembly x Radiator assembly (Bolt B:) | 7.0 | 71 | 62 in.*lbf |
| Radiator support upper RH sub-assembly x Radiator assembly (Bolt C:) | 3.9 | 40 | 35 in.*lbf |
| Radiator support upper LH sub-assembly x Radiator assembly (Bolt A:) | 5.0 | 51 | 44 in.*lbf |
| Radiator support upper LH sub-assembly x Radiator assembly (Bolt B:) | 7.0 | 71 | 62 in.*lbf |
| Radiator support upper sub-assembly x Body (Bolt) | 7.0 | 71 | 62 in.*lbf |
| Radiator support upper sub-assembly x Body (Nut) | 8.0 | 82 | 71 in.*lbf |
| Bracket x Body | 9.8 | 100 | 87 in.*lbf |
| HEATER WATER PUMP | |||
| Heater water pump assembly x Body | 9.8 | 100 | 87 in.*lbf |
TORQUE SPECIFICATIONS - AIR CONDITIONING
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Steering pad x Steering wheel assembly | 8.8 | 90 | 78 in.*lbf |
| Driver side knee airbag assembly x Instrument panel reinforcement | 7.6 | 78 | 68 in.*lbf |
| Front passenger airbag assembly x Instrument panel reinforcement | 20 | 200 | 14 |
| Curtain shield airbag assembly x Body | 14 | 143 | 10 |
| Center airbag sensor assembly x Body | 17.5 | 179 | 13 |
| Front airbag sensor x Body | 9.0 | 92 | 80 in.*lbf |
| Side airbag sensor x Body | 17.5 | 179 | 13 |
| Rear airbag sensor x Body | 17.5 | 179 | 13 |
| Seat position sensor x Front seat assembly | 8.0 | 82 | 71 in.*lbf |
TORQUE SPECIFICATIONS - SUPPLEMENTAL RESTRAINT SYSTEM
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| FRONT SEAT INNER BELT ASSEMBLY | |||
| Front seat inner belt assembly x Seat adjuster assembly | 42 | 428 | 31 |
| Front seat assembly x Body | 37 | 377 | 27 |
| FRONT SEAT OUTER BELT ASSEMBLY | |||
| Front seat outer belt assembly x Body (Upper bolt) | 7.5 | 77 | 66 in.*lbf |
| Front seat outer belt assembly x Body (Lower bolt) | 42 | 428 | 31 |
| Front seat outer belt assembly x Body (shoulder anchor side) | 42 | 428 | 31 |
| Front seat outer belt assembly x Body (floor anchor side) | 42 | 428 | 31 |
| REAR SEAT INNER BELT ASSEMBLY | |||
| Rear seat belt assembly Inner x Rear seat frame assembly | 42 | 428 | 31 |
| Separate type rear seat cushion assembly x Rear seat frame assembly ("Torx" bolt) | 21 | 214 | 16 |
| Separate type rear seat cushion assembly x Rear seat frame assembly (Bolt) | 18 | 184 | 13 |
| Rear Seat assembly LH x Body | 37 | 377 | 27 |
| Fold seat stopper band assembly No.2 x Body | 9.0 | 92 | 80 in.*lbf |
| Separate type rear seat cushion assembly x Rear seat frame assembly ("Torx" bolt) | 21 | 214 | 16 |
| Separate type rear seat cushion assembly x Rear seat frame assembly (Bolt) | 18 | 184 | 13 |
| Center seat assembly x Rear seat frame assembly | 21 | 214 | 16 |
| Rear Seat assembly RH x Body | 37 | 377 | 27 |
| Fold seat stopper band assembly No.1 x Body | 9.0 | 92 | 80 in.*lbf |
| REAR SEAT OUTER BELT ASSEMBLY | |||
| Rear seat outer belt assembly x Body (Upper bolt) | 7.5 | 77 | 66 in.*lbf |
| Rear seat outer belt assembly x Body (Lower bolt) | 42 | 428 | 31 |
| Rear seat outer belt assembly x Body (shoulder anchor side) | 42 | 428 | 31 |
| Rear seat outer belt assembly x Body (floor anchor side) | 42 | 428 | 31 |
| Rope hook x Body | 8.0 | 80 | 70 in.*lbf |
| Rear Seat assembly LH x Body | 37 | 377 | 27 |
| Fold seat stopper band assembly No.2 x Body | 9.0 | 92 | 80 in.*lbf |
| Rear Seat assembly RH x Body | 37 | 377 | 27 |
| Fold seat stopper band assembly No.1 x Body | 9.0 | 92 | 80 in.*lbf |
| REAR CENTER SEAT INNER BELT ASSEMBLY | |||
| Rear center seat inner belt assembly x Body | 42 | 428 | 31 |
| Rear Seat assembly LH x Body | 37 | 377 | 27 |
| Fold seat stopper band assembly No.2 x Body | 9.0 | 92 | 80 in.*lbf |
| REAR CENTER SEAT OUTER BELT ASSEMBLY | |||
| Rear center seat belt assembly x Rear seat frame assembly (Bolt) | 7.5 | 77 | 66 in.*lbf |
| Rear center seat belt assembly x Rear seat frame assembly (Nut) | 42 | 428 | 31 |
| Rear seat belt hook x Rear seatback frame sub-assembly | 6,0 | 61 | 53 in.*lbf |
| Rear seat lock striker x Rear seat frame assembly | 33 | 337 | 24 |
| Separate type rear seat cushion assembly x Rear seat frame assembly ("Torx" bolt) | 21 | 214 | 16 |
| Separate type rear seat cushion assembly x Rear seat frame assembly (Bolt) | 18 | 184 | 13 |
| Center seat assembly x Rear seat frame assembly | 21 | 214 | 16 |
| Rear Seat assembly RH x Body | 37 | 377 | 27 |
| Fold seat stopper band assembly No.1 x Body | 9.0 | 92 | 80 in.*lbf |
TORQUE SPECIFICATIONS - SEAT BELT
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Cruise control main switch x Steering wheel assembly | 2.4 | 25 | 21 in.*lbf |
TORQUE SPECIFICATIONS - CRUISE CONTROL
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Height control sensor x Rear suspension arm | 5.4 | 55 | 48 in.*lbf |
| Headlight swivel ECU x Body | 7.0 | 71 | 62 in.*lbf |
| Headlight leveling ECU x Body | 7.0 | 71 | 62 in.*lbf |
TORQUE SPECIFICATIONS - LIGHTING
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Front wiper arm and blade assembly LH x Windshield wiper motor and link assembly | 24 | 245 | 18 |
| Front wiper arm and blade assembly RH x Windshield wiper motor and link assembly | 24 | 245 | 18 |
| Windshield wiper motor and link assembly x Body | 7.0 | 71 | 62 in.*lbf |
| Windshield wiper motor and link assembly x Windshield wiper motor assembly | 5.4 | 55 | 48 in.*lbf |
| Crank arm x Windshield wiper motor assembly | 17 | 175 | 13 |
| Rear wiper motor x Back door panel | 5.5 | 56 | 49 in.*lbf |
| Rear wiper motor x Rear wiper arm | 5.5 | 56 | 49 in.*lbf |
| Headlight washer actuator x Front bumper assembly | 4.5 | 46 | 40 in.*lbf |
TORQUE SPECIFICATIONS - WIPER AND WASHER
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Antenna nut x Amplifier antenna | 4.5 | 46 | 40 in.*lbf |
TORQUE SPECIFICATIONS - AUDIO / VISUAL
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Back door garnish x Body | 9.8 | 100 | 87 in.*lbf |
TORQUE SPECIFICATIONS - PARK ASSIST / MONITORING
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| High pitched horn x Body | 20 | 204 | 15 |
| Low pitched horn x Body | 20 | 204 | 15 |
TORQUE SPECIFICATIONS - HORN
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Wiper arm x Wiper link | 24 | 245 | 18 |
| Rear wiper motor x Body | 5.5 | 56 | 49 in.*lbf |
| Rear wiper motor x Rear wiper arm | 5.5 | 56 | 49 in.*lbf |
TORQUE SPECIFICATIONS - WINDSHIELD / WINDOW GLASS
| Part Tightened | N*m | Kgf*cm | In.*lbf |
|---|---|---|---|
| Inner rear view mirror x Front windshield | 3.5 | 36 | 31 in.*lbf |
| Outer rear view mirror assembly x Front door | 8.0 | 82 | 71 in.*lbf |
TORQUE SPECIFICATIONS - MIRROR
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Instrument Panel Reinforcement x Passenger Airbag | 20 | 204 | 15 |
TORQUE SPECIFICATIONS - INSTRUMENT PANEL
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| FRONT SEAT ASSEMBLY | |||
| Front seat cushion frame sub-assembly x Seat adjuster assembly (Driver seat only) | 19 | 56 | 14 |
| Front seat side airbag assembly x Seat adjuster assembly | 5.5 | 56 | 49 in.*lbf |
| Seat position sensor x Seat adjuster assembly (Driver seat only) | 8.0 | 82 | 71 in.*lbf |
| Separate type front seatback cover bracket x Seat adjuster assembly | 5.6 | 57 | 50 in.*lbf |
| Seat armrest assembly x Seat adjuster assembly | 37 | 377 | 27 |
| Front seat inner belt assembly x Seat adjuster assembly | 42 | 428 | 31 |
| Front seat assembly x Body | 37 | 377 | 27 |
| REAR SEAT ASSEMBLY (for LH Side) | |||
| Fold seat cushion frame No.1 x Rear seat track assembly inner | 42 | 428 | 31 |
| Fold seat cushion frame No.1 x Rear seat track assembly outer | 42 | 428 | 31 |
| Reclining control link sub-assembly x Rear seat track assembly | 42 | 428 | 31 |
| Rear seatback frame sub-assembly lower x Rear seat track assembly | 42 | 428 | 31 |
| Rear seatback frame sub-assembly x Rear seatback frame sub-assembly lower | 42 | 428 | 31 |
| Seat track stop plate x Rear seatback frame sub-assembly lower | 18 | 184 | 13 |
| Rear seat belt hook x Rear seatback frame sub-assembly | 6.0 | 61 | 53 in.*lbf |
| Rear seat belt assembly Inner x Rear seat frame assembly | 42 | 428 | 31 |
| Separate type rear seat cushion assembly x Rear seat frame assembly ("Torx" bolt) | 21 | 214 | 16 |
| Separate type rear seat cushion assembly x Rear seat frame assembly (Bolt) | 18 | 184 | 13 |
| Rear Seat assembly LH x Body | 37 | 377 | 27 |
| Fold seat stopper band assembly No.2 x Body | 9.0 | 92 | 80 in.*lbf |
| REAR SEAT ASSEMBLY (for RH Side) | |||
| Fold seat cushion frame No.2 x Rear seat track assembly inner | 42 | 428 | 31 |
| Fold seat cushion frame No.2 x Rear seat track assembly outer | 42 | 428 | 31 |
| Reclining control link sub-assembly x Rear seat track assembly (Bolt) | 21 | 214 | 16 |
| Reclining control link sub-assembly x Rear seat track assembly (Nut) | 42 | 428 | 31 |
| Rear seatback frame sub-assembly lower x Rear seat track assembly ("Torx" bolt T45) | 42 | 428 | 31 |
| Rear seatback frame sub-assembly lower x Rear seat track assembly ("Torx" bolt T55) | 80 | 816 | 59 |
| Rear seatback frame sub-assembly x Rear seatback frame sub-assembly lower (Bolt) | 55 | 561 | 41 |
| Rear seatback frame sub-assembly x Rear seatback frame sub-assembly lower ("Torx" bolt T45) | 42 | 428 | 31 |
| Seat track stop plate x Rear seatback frame sub-assembly lower | 18 | 184 | 13 |
| Rear center seat belt assembly x Rear seat frame assembly (Bolt) | 7.5 | 77 | 66 in.*lbf |
| Rear center seat belt assembly x Rear seat frame assembly (Nut) | 42 | 428 | 31 |
| Rear seat belt hook x Rear seatback frame sub-assembly | 6.0 | 61 | 53 in.*lbf |
| Rear seat lock striker x Rear seat frame assembly | 33 | 337 | 24 |
| Rear seat belt assembly Inner x Rear seat frame assembly | 42 | 428 | 31 |
| Separate type rear seat cushion assembly x Rear seat frame assembly ("Torx" bolt) | 21 | 214 | 16 |
| Separate type rear seat cushion assembly x Rear seat frame assembly (Bolt) | 18 | 184 | 13 |
| Rear seatback lock sub-assembly x Center seatback frame sub-assembly | 21 | 214 | 16 |
| Rear seat armrest assembly center x Center seatback assembly | 21 | 214 | 16 |
| Rear seatback hinge sub-assembly center x Center seatback assembly | 21 | 214 | 16 |
| Center seat cushion assembly x Center seatback assembly | 21 | 214 | 16 |
| Center seat assembly x Rear seat frame assembly | 21 | 214 | 16 |
| Rear Seat assembly RH x Body | 37 | 377 | 27 |
| Fold seat stopper band assembly No.1 x Body | 9.0 | 92 | 80 in.*lbf |
TORQUE SPECIFICATIONS - SEAT
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| HOOD | |||
| Hood auxiliary catch hook assembly x Hood panel | 7.0 | 71 | 62 in.*lbf |
| Hood auxiliary catch release lever assembly x Hood panel | 7.0 | 71 | 62 in.*lbf |
| Hood hinge x Body | 13 | 133 | 10 |
| Hood hinge x Hood panel | 13 | 133 | 10 |
| Hood lock x Body | 8.0 | 82 | 71 in.*lbf |
| Hood support rod x Body | 19.5 | 199 | 14 |
| FRONT DOOR | |||
| Door check x Body | 27 | 275 | 20 |
| Door check x Door panel | 8.0 | 82 | 71 in.*lbf |
| Door hinge x Body | 26 | 265 | 19 |
| Door hinge x Door panel | 26 | 265 | 19 |
| Door lock x Door panel | 5.0 | 51 | 44 in.*lbf |
| Door lock striker x Body | 23 | 235 | 17 |
| Power window regulator motor x Window regulator | 5.5 | 56 | 49 in.*lbf |
| Window regulator x Door panel | 8.0 | 82 | 71 in.*lbf |
| REAR DOOR | |||
| Door check x Body | 27 | 275 | 20 |
| Door check x Door panel | 8.0 | 82 | 71 in.*lbf |
| Door hinge x Body | 26 | 265 | 19 |
| Door hinge x Door panel | 27 | 275 | 20 |
| Door lock x Door panel | 5.0 | 51 | 44 in.*lbf |
| Door lock striker x Body | 23 | 235 | 17 |
| Power window regulator motor x Window regulator | 5.5 | 56 | 49 in.*lbf |
| Window regulator x Door panel | 8.0 | 82 | 71 in.*lbf |
| BACK DOOR | |||
| Back door hinge x Body | 11.5 | 117 | 8 |
| Back door hinge x Door panel | 8.0 | 82 | 71 in.*lbf |
| Back door stay sub-assembly x Body | 8.0 | 82 | 71 in.*lbf |
| Back door stay sub-assembly x Door panel | 8.0 | 82 | 71 in.*lbf |
| Back door lock assembly x Door panel | 13 | 133 | 10 |
| Luggage compartment door closer assembly x Body | 31 | 316 | 23 |
| Power back door sensor x Door panel | 3.5 | 36 | 31 in.*lbf |
| Door lock striker x Body | 23 | 235 | 17 |
| FUEL LID | |||
| Fuel lid opener motor assembly x Body | 5.5 | 56 | 49 in.*lbf |
TORQUE SPECIFICATIONS - ENGINE HOOD / DOOR
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| FRONT BUMPER | |||
| Front bumper reinforcement x Body | 77 | 41 | 35 in.*lbf |
| REAR BUMPER | |||
| Rear bumper cover x Body (Nut:) | 8.0 | 81 | 71 in.*lbf |
| Rear bumper side support x Body | 3.0 | 31 | 27 in.*lbf |
| Rear bumper side retainer x Body | 3.0 | 31 | 27 in.*lbf |
| Rear bumper reinforcement No.1 x Body | 27 | 275 | 20 |
| REAR SPOILER | |||
| Rear spoiler x Door panel | 9.8 | 100 | 87 in.*lbf |
| BACK DOOR GARNISH | |||
| Back door garnish x Body | 9.8 | 100 | 87 in.*lbf |
TORQUE SPECIFICATIONS - EXTERIOR
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Rope hook set bolt | 8.0 | 80 | 71 in.*lbf |
| Front seat outer belt assembly set bolt | 42 | 428 | 31 |
| Rear No. 1 seat outer belt assembly set bolt | 42 | 428 | 31 |
TORQUE SPECIFICATIONS - INTERIOR
| Part Tightened | N*m | Kgf*cm | In.*lbf |
|---|---|---|---|
| Sliding roof piece sub-assembly set screw | 2.0 | 20 | 18 |
| Sliding roof guide stopper x Sliding roof housing sub-assembly | 2.0 | 20 | 18 |
| Siding roof drive gear sub-assembly x Sliding roof housing sub-assembly | 5.4 | 55 | 48 |
TORQUE SPECIFICATIONS - SLIDING ROOF