TORQUE SPECIFICATION
| Part Tightened | N.m | Kgf.cm | Ft.lbf |
|---|---|---|---|
| Part Tightened | N.m | Kgf.cm | Ft.lbf |
| Starter assy x Transaxle housing | 37 | 380 | 26 |
| Starter wire x Starter assy | 9.8 | 100 | 7 |
| Air cleaner inlet No. 1 x Body | 7.0 | 71 | 62 in..lbf |
| Air cleaner bracket x Body | 12 | 122 | 9 |
| Air cleaner case sub-assy x Air cleaner bracket | 5.0 | 51 | 44 in..lbf |
| Air cleaner case sub-assy x Body | 5.0 | 51 | 44 in..lbf |
| Air cleaner cap sub-assy x Air cleaner case sub-assy | 5.0 | 51 | 44 in..lbf |
| Air cleaner inlet No. 2 x Body | 7.0 | 71 | 62 in..lbf |
| Battery clamp sub-assy x Body | 5.5 | 56 | 49 in..lbf |
| Battery clamp sub-assy x Battery clamp bolt | 5.5 | 56 | 49 in..lbf |
| Terminal x Battery | 3.5 | 36 | 31 in..lbf |
| Starter yoke assy x Repair service starter kit | 6.0 | 61 | 53 in..lbf |
| Repair service starter kit x Repair service starter kit | 7.5 | 76 | 66 in..lbf |
| Lead wire x Repair service starter kit | 10 | 102 | 7 |
| Generator assy x Generator bracket No. 1 | 58 | 592 | 43 |
| Generator assy x Generator belt adjusting bar | 18 | 184 | 13 |
| Generator wire x Generator assy | 9.8 | 100 | 7 |
| Retainer plate x Drive end frame assy generator | 2.3 | 23 | 20 in..lbf |
| Generator rectifier end frame x Drive end frame assy generator | 5.8 | 59 | 51 in..lbf |
| Generator brush holder assy x Generator rectifier end frame | 1.8 | 18 | 16 in..lbf |
| Generator rear end cover x Generator rectifier end frame | 4.6 | 47 | 41 in..lbf |
| Generator pulley x Generator rotor assy (100A Generator) | 111 | 1,127 | 82 |
| Generator pulley x Generator rotor assy (130A Generator) | 110 | 1,125 | 82 |
TORQUE SPECIFICATION