Home ReviewsRefund
Home/Lexus/LX/Lexus LX J100 (1998-2002)/Repair manual/Steering Column/Power Tilt Steering Column Systems: Overhaul
Contents Wiring diagrams Section: Steering Column All sections

Power Tilt Steering Column Systems: Overhaul Lexus LX J100

Steering Column ~127 words

Disassembly

  1. Remove lower cover. Remove bolt securing intermediate shaft-to-steering gear assembly. Before removing intermediate shaft, make alignment marks on intermediate shaft and steering gear assembly for reassembly. (Схема №5) Remove intermediate shaft from steering gear assembly. Remove screw, key coil and ignition light assembly.
  2. Remove bolt and connector bracket. Remove bolt and column protector. Remove 3 securing bolts and turn signal bracket.
  3. Remove support stopper bolt. Remove stopper spring and stopper. Remove 2 tilt steering bolts. Remove 2 "E" rings. Remove 2 support stopper bolt bushings from motor. Using Special Service Tool (09910-00015), washer and bolt, remove 2 tilt steering shafts using slide hammer on special service tool. Remove support stopper bolt bushings from adjusting nut No. 1. Remove telescoping motor.

More articles — Power Tilt Steering Column Systems