SPECIFIED TORQUE FOR STANDARD BOLTS
| Class | Diameter (mm) | Pitch (mm) | Specified torque | |||||
|---|---|---|---|---|---|---|---|---|
| Hexagon head bolt | Hexagon flange bolt | |||||||
| N*m | Kgf*cm | Ft.*lbf | N*m | Kgf*cm | Ft.*lbf | |||
| 4T | 6 | 1 | 5 | 55 | 48 in.*lbf | 6 | 60 | 52 in.*lbf |
| 8 | 1.25 | 12.5 | 130 | 9 | 14 | 145 | 10 | |
| 10 | 1.25 | 26 | 260 | 19 | 29 | 290 | 21 | |
| 12 | 1.25 | 47 | 480 | 35 | 53 | 540 | 39 | |
| 14 | 1.5 | 74 | 760 | 55 | 84 | 850 | 61 | |
| 16 | 1.5 | 115 | 1,150 | 83 | ||||
| 5T | 6 | 1 | 6.5 | 65 | 56 in.*lbf | 7.5 | 75 | 65 in.*lbf |
| 8 | 1.25 | 15.5 | 160 | 12 | 17.5 | 175 | 13 | |
| 10 | 1.25 | 32 | 330 | 24 | 36 | 360 | 26 | |
| 12 | 1.25 | 59 | 600 | 43 | 65 | 670 | 48 | |
| 14 | 1.5 | 91 | 930 | 67 | 100 | 1,050 | 76 | |
| 16 | 1.5 | 140 | 1,400 | 101 | ||||
| 6T | 6 | 1 | 8 | 80 | 69 in.*lbf | 9 | 90 | 78 in.*lbf |
| 8 | 1.25 | 19 | 195 | 14 | 21 | 210 | 15 | |
| 10 | 1.25 | 39 | 400 | 29 | 44 | 440 | 32 | |
| 12 | 1.25 | 71 | 730 | 53 | 80 | 810 | 59 | |
| 14 | 1.5 | 110 | 1,100 | 80 | 125 | 1,250 | 90 | |
| 16 | 1.5 | 170 | 1,750 | 127 | ||||
| 7T | 6 | 1 | 10.5 | 110 | 8 | 12 | 120 | 9 |
| 8 | 1.25 | 25 | 260 | 19 | 28 | 290 | 21 | |
| 10 | 1.25 | 52 | 530 | 38 | 58 | 590 | 43 | |
| 12 | 1.25 | 95 | 970 | 70 | 105 | 1,050 | 76 | |
| 14 | 1.5 | 145 | 1,500 | 108 | 165 | 1,700 | 123 | |
| 16 | 1.5 | 230 | 2,300 | 166 | ||||
| 8T | 8 | 1.25 | 29 | 300 | 22 | 33 | 330 | 24 |
| 10 | 1.25 | 61 | 620 | 45 | 68 | 690 | 50 | |
| 12 | 1.25 | 110 | 1,100 | 80 | 120 | 1,250 | 90 | |
| 9T | 8 | 1.25 | 34 | 340 | 25 | 37 | 380 | 27 |
| 10 | 1.25 | 70 | 710 | 51 | 78 | 790 | 57 | |
| 12 | 1.25 | 125 | 1,300 | 94 | 140 | 1,450 | 105 | |
| 10T | 8 | 1.25 | 38 | 390 | 28 | 42 | 430 | 31 |
| 10 | 1.25 | 78 | 800 | 58 | 88 | 890 | 64 | |
| 12 | 1.25 | 140 | 1,450 | 105 | 155 | 1,600 | 116 | |
| 11T | 8 | 1.25 | 42 | 430 | 31 | 47 | 480 | 35 |
| 10 | 1.25 | 87 | 890 | 64 | 97 | 990 | 72 | |
| 12 | 1.25 | 155 | 1,600 | 116 | 175 | 1,800 | 130 | |
STANDARD BOLTS SPECIFIED TORQUE
TORQUE SPECIFICATIONS
Camshaft Oil Control Valve
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Camshaft timing oil control valve assembly (for Bank 1) x Cylinder head cover | 10 | 102 | 7 |
| Camshaft timing oil control valve assembly (for Bank 2) x Cylinder head cover | 10 | 102 | 7 |
CAMSHAFT OIL CONTROL VALVE TORQUE SPECIFICATIONS
Camshaft Timing Control Motor
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Camshaft timing control with EDU motor assembly LH x Timing chain cover | 21 | 214 | 15 |
| Camshaft timing control with EDU motor assembly RH x Timing chain cover | 21 | 214 | 15 |
| Engine wire bracket x Timing chain cover | 12 | 122 | 9 |
CAMSHAFT TIMING CONTROL MOTOR TORQUE SPECIFICATIONS
Throttle Body
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Throttle body assembly x Intake manifold | 10 | 102 | 7 |
| Intake air connector pipe x Throttle body assembly x Hose clamp | 4.8 | 49 | 42 in.*lbf |
| Intake air connector pipe x Intake air resonator x Hose clamp | 3.8 | 39 | 34 in.*lbf |
| No. 1 air cleaner inlet x Upper radiator support | 5.0 | 51 | 44 in.*lbf |
THROTTLE BODY TORQUE SPECIFICATIONS
ECM
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| ECM x ECU box | 5.5 | 56 | 49 in.*lbf |
| TCM x ECU box | 5.5 | 56 | 49 in.*lbf |
| Engine room ECU cover x ECU box | 5.5 | 56 | 49 in.*lbf |
ECM TORQUE SPECIFICATIONS
Accelerator Pedal
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Accelerator pedal x Body panel | 5.4 | 55 | 48 in.*lbf |
ACCELERATOR PEDAL TORQUE SPECIFICATIONS
Mass Air Flow Meter
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Mass air flow meter sub-assembly (for Bank 1) x Air cleaner cap sub-assembly LH | 1.0 | 10 | 9 in.*lbf |
| Mass air flow meter sub-assembly (for Bank 2) x Air cleaner cap sub-assembly RH | 1.0 | 10 | 9 in.*lbf |
| Air cleaner cap sub-assembly LH x Intake air connector pipe x Hose clamp | 3.8 | 39 | 34 in.*lbf |
| Air cleaner cap sub-assembly RH x Intake air connector pipe x Hose clamp | 3.8 | 39 | 34 in.*lbf |
MASS AIR FLOW METER TORQUE SPECIFICATIONS
Camshaft Position Sensor
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Camshaft position sensor x Cylinder head cover RH | 10 | 102 | 7 |
CAMSHAFT POSITION SENSOR TORQUE SPECIFICATIONS
VVT Sensor
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| VVT sensor x Cylinder head cover LH and RH | 10 | 102 | 7 |
| Air cleaner case RH x Cylinder head cover RH | 5.0 | 51 | 44 in.*lbf |
| Air cleaner case LH x Cylinder head cover LH | 5.0 | 51 | 44 in.*lbf |
| Air cleaner case RH x Intake air connector pipe | 3.8 | 39 | 34 in.*lbf |
| Air cleaner case LH x Intake air connector pipe | 3.8 | 39 | 34 in.*lbf |
VVT SENSOR TORQUE SPECIFICATIONS
Crankshaft Position Sensor
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Crankshaft position sensor x Flywheel housing | 10 | 102 | 7 |
CRANKSHAFT POSITION SENSOR TORQUE SPECIFICATIONS
Engine Coolant Temperature Sensor
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Engine coolant temperature sensor x front water by-pass joint | 13(20) | 133 (200) | 10 (14) |
| (): For use without ball joint lock nut wrench | |||
ENGINE COOLANT TEMPERATURE SENSOR TORQUE SPECIFICATIONS
Knock Sensor
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Knock sensor x Cylinder block | 20 | 204 | 15 |
| Separator case x Cylinder block | 10 | 102 | 7 |
KNOCK SENSOR TORQUE SPECIFICATIONS
Air Fuel Ratio Sensor
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Air fuel ratio sensor (for Bank 1 Sensor 1) x Exhaust manifold LH | 40 (44) | 408 (449) | 30 (32) |
| Air fuel ratio sensor (for Bank 2 Sensor 1) x Exhaust manifold RH | 40 (44) | 408 (449) | 30 (32) |
| (): For use without SST | |||
AIR FUEL RATIO SENSOR TORQUE SPECIFICATIONS
Heated Oxygen Sensor
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Heated oxygen sensor (for Bank 1 Sensor 2) x Front Exhaust Pipe LH | 40 (44) | 408 (449) | 30 (32) |
| Heated oxygen sensor (for Bank 2 Sensor 2) x Front exhaust pipe RH | 40 (44) | 408 (449) | 30 (32) |
| (): For use without SST | |||
HEATED OXYGEN SENSOR TORQUE SPECIFICATIONS
| Part tightened | N*m | Kgf*cm | Ft.*lbf | |
|---|---|---|---|---|
| Engine hanger x Cylinder head | 43 | 438 | 32 | |
| Engine oil level sensor x Oil pan | 7.0 | 71 | 62 in.*lbf | |
| No. 1 idler pulley x Timing chain cover | 43 | 438 | 32 | |
| No. 2 idler pulley x Timing chain cover | 43 | 438 | 32 | |
| Engine wire x No. 1 heat exchanger cover | 10 | 102 | 7 | |
| Front No. 1 engine mounting bracket RH x Cylinder block | 35 | 357 | 26 | |
| Front No. 1 engine mounting bracket LH x Cylinder block | 35 | 357 | 26 | |
| Engine mounting damper x Front No. 1 engine mounting bracket | 11 | 112 | 8 | |
| Front engine mounting insulator x Front No. 1 engine mounting bracket | 35 | 357 | 26 | |
| Drive plate and ring gear x crankshaft | 30 | 301 | 22 | |
| Engine wire x Intake manifold | 10 | 102 | 7 | |
| Starter wire x Starter | 10 | 102 | 7 | |
| Generator wire x Generator | 12 | 122 | 9 | |
| Oil level dipstick guide x Water inlet housing | 10 | 102 | 7 | |
| Oil level dipstick guide x Front No. 1 engine mounting bracket | 10 | 102 | 7 | |
| Front suspension crossmember x Body | 204 | 2080 | 150 | |
| Engine rear mounting member x Body | 26 | 265 | 19 | |
| Cooler compressor x Body | For Bolt, nut | 25 | 255 | 18 |
| For Stud bolt | 10 | 102 | 7 | |
| Engine wire x No. 1 engine room junction block | 13 | 133 | 10 | |
| Ground wire x Timing chain cover | 21 | 214 | 15 | |
| Front suspension crossmember lower x Front suspension crossmember | 30 | 306 | 22 | |
| Front suspension member protector lower x Front suspension crossmember | 10 | 102 | 7 | |
| No. 2 engine under cover x Front suspension member protector lower | For Bolt A | 10 | 102 | 7 |
| For Bolt B | 27 | 275 | 20 | |
| Water pump x Timing chain cover | For Bolt A | 20 | 204 | 15 |
| For Bolt B | 23 | 235 | 17 | |
| For Bolt C | 47 | 479 | 35 | |
| Water pump pulley x Water pump | 21 | 214 | 15 | |
| Water inlet housing x Timing chain cover | 21 | 214 | 15 | |
| Oil pump relief valve plug x Oil pump cover | 53 | 540 | 39 | |
| Oil pump cover x Timing chain cover | 10 | 102 | 7 | |
| Timing chain cover x Cylinder block | For Bolt A, B, C | 23 | 235 | 17 |
| For Bolt D, E, F | 47 | 479 | 35 | |
| Plug x Timing chain cover | 46 | 469 | 34 | |
| Cylinder head cover x Cylinder head | For Bolt A | 21 | 214 | 15 |
| For Except bolt | 12 | 122 | 9 | |
| Crankshaft Pulley x Crankshaft | 300 | 3059 | 221 | |
| Oil filter bracket x Timing chain cover | 21 | 214 | 15 | |
| Battery tray x Body | 5.4 | 55 | 71 in.*lbf | |
| Battery clamp x Clamp bolt | 5.4 | 55 | 71 in.*lbf | |
| No. 1 chain tensioner x Cylinder head | 10 | 102 | 7 | |
| No. 2 chain tensioner x Cylinder head | 10 | 102 | 7 | |
| No. 3 chain tensioner x Cylinder head | 10 | 102 | 7 | |
| No. 1 chain vibration damper x Cylinder block | 21 | 214 | 15 | |
| Camshaft timing gear x Camshaft | 79 | 806 | 58 | |
| Camshaft timing exhaust gear x Camshaft | 100 | 1020 | 74 | |
| Camshaft housing x Cylinder head | For Bolt A | 10 | 102 | 7 |
| For Except bolt | 30 | 306 | 22 | |
| Camshaft bearing cap x Camshaft housing | 16 | 163 | 12 | |
| Cylinder head x Cylinder block | 1st | 36 | 367 | 27 |
| 2nd | Turn 90° | Turn 90° | Turn 90° | |
| 3rd | Turn 90° | Turn 90° | Turn 90° | |
| For 12 mm head | 21 | 214 | 15 | |
| Cylinder head stud bolt | E6 and E8 "TORX" | 9.0 | 92 | 80 in.*lbf |
| No. 2 straight screw plug x Cylinder head | 85 | 867 | 63 | |
| No. 1 straight screw plug x Cylinder head | 44 | 449 | 32 | |
| Connecting rod x Connecting rod cap | 1st | 40 | 408 | 30 |
| 2nd | Turn 90° | Turn 90° | Turn 90° | |
| Crankshaft bearing cap x Cylinder block | For Inside position | 61 | 622 | 45 |
| For Outside position | 27 | 275 | 20 | |
| 2nd | Turn 90° | Turn 90° | Turn 90° | |
| For Cylinder block side position | 45 | 459 | 33 | |
| Cylinder block stud bolt | For Stud bolt A (E10 "TORX") | 10 | 102 | 7 |
| For Stud bolt B (E8 "TORX") | 9.0 | 92 | 80 in.*lbf | |
| No. 1 oil nozzle x Cylinder block | 10 | 102 | 7 | |
| Resonator bracket x Timing chain cover | 20 | 204 | 15 | |
| Oil pan stud bolt (E6 "TORX") | 5.0 | 51 | 44 in.*lbf | |
| Oil drain pipe x Cylinder block | 10 | 102 | 7 | |
| Oil seal retainer x Cylinder block | 10 | 102 | 7 | |
| Oil strainer x Oil pan | 21 | 214 | 15 | |
| Oil pan baffle plate x Oil pan | 10 | 102 | 7 | |
| Oil pan x cylinder block | For Bolt A | 10 | 102 | 7 |
| For Bolt B | 35 | 357 | 26 | |
| For Nut | 35 | 357 | 26 | |
| No. 2 oil pan x Oil pan | 10 | 102 | 7 | |
| Oil pan protector x No. 2 oil pan | 5.0 | 51 | 44 in.*lbf | |
| No. 1 heat exchanger cover x Cylinder block | 21 | 214 | 15 | |
| Cylinder head cover spacer x Cylinder head cover | 10 | 102 | 7 | |
| Cylinder head cover x Cylinder head | For Bolt A | 21 | 214 | 15 |
| For Except bolt | 12 | 122 | 9 | |
| Front water by-pass joint x Cylinder head | 21 | 214 | 15 | |
| Cylinder block water drain cock x Cylinder block | 30 | 306 | 22 | |
| Water drain cock plug x Water drain cock | 13 | 133 | 10 | |
| Camshaft timing oil control valve x Cylinder head cover | 10 | 102 | 7 | |
| Crankshaft position sensor x Oil pan | 10 | 102 | 7 | |
| Camshaft position sensor x Cylinder head cover | 10 | 102 | 7 | |
| VVT sensor x Cylinder head cover | 10 | 102 | 7 | |
| Oil filler cap housing x Cylinder head cover | 10 | 102 | 7 | |
| Front engine mounting insulator x Front suspension crossmember for 2WD | 64 | 653 | 47 | |
| Front propeller shaft x Transfer companion flange | 25 | 255 | 18 | |
| Front propeller shaft x Differential companion flange | 25 | 255 | 18 | |
| Front No. 2 engine mounting bracket LH x Cylinder block | 21 | 214 | 15 | |
| Front No. 2 engine mounting bracket RH x Cylinder block | 21 | 214 | 15 | |
| Engine oil level dipstick guide x Cylinder head cover | 10 | 102 | 7 | |
| Front frame x Engine mounting insulator | 70 | 714 | 52 | |
| Rear engine mounting member x Body | 26 | 260 | 19 | |
| Front lower shock absorber bracket RH x Shock absorber | 48 | 489 | 35 | |
| Front lower shock absorber bracket LH x Shock absorber | 48 | 489 | 35 | |
| No. 1 air duct x Steering column | 9.8 | 100 | 87 in.*lbf | |
| Rear frame side rail x front frame | 30 | 306 | 22 | |
| Front suspension member protector lower x Front frame | For bolt A | 20 | 204 | 15 |
| For other bolt | 50 | 510 | 37 | |
| Front floor cover center x Front frame, Rear engine mounting member | 5.4 | 55 | 48 in.*lbf | |
| No. 2 oil pan baffle plate x Oil pan | 10 | 102 | 7 | |
| Cylinder head cover spacer x Cylinder head cover | 10 | 102 | 7 | |
| No. 4 engine rear mounting insulator x Automatic transmission for AWD | 30 | 306 | 22 | |
| No. 1 engine rear mounting insulator x Automatic transmission | 30 | 306 | 22 | |
| No. 2 engine rear mounting insulator x Automatic transmission for AWD | 30 | 306 | 22 | |
| Engine rear mounting member x No. 1 engine rear mounting insulator for 2WD | 14 | 138 | 10 | |
| Engine rear mounting member x Body for 2WD | 26 | 260 | 19 | |
| Engine rear mounting member x No. 1, No. 2, No. 3 engine rear mounting insulator for AWD | 38 | 387 | 28 | |
| Engine rear mounting member x Body for AWD | 26 | 260 | 19 | |
TIGHTENING TORQUE SPECIFICATIONS
| Part tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| No. 1 fuel delivery pipe (Port Injection side) x Cylinder head | 21 | 214 | 15 |
| No. 2 fuel delivery pipe (Port Injection side) x Cylinder head | 21 | 214 | 15 |
| No. 1 fuel delivery pipe (Direct Injection side) x Cylinder head | 21 | 214 | 15 |
| No. 2 fuel delivery pipe (Direct Injection side) x Cylinder head | 21 | 214 | 15 |
| No. 4 fuel pipe x Fuel delivery pipe | 27 | 275 | 20 |
| No. 2 fuel pipe x High pressure side fuel pump | 27 | 275 | 20 |
| No. 3 fuel pipe x High pressure side fuel pump | 27 | 275 | 20 |
| No. 1 fuel pipe x Cylinder head cover | 10 | 102 | 7 |
| Fuel pressure pulsation damper x High pressure side fuel pump | 35 (40) | 357 (409) | 26 (30) |
| Intake manifold x Cylinder head | 21 | 214 | 15 |
| Fuel pressure sensor x No. 1 fuel delivery pipe | 30 (44) | 306 (449) | 22 (32) |
| Fuel relief valve x No. 2 fuel delivery pipe | 29 | 296 | 21 |
| Injector driver x Cylinder head | 10 | 102 | 7 |
| Injector driver x Bracket | 7.5 | 76 | 66 in.*lbf |
| No. 2 fuel pipe x Fuel delivery pipe | 10 | 102 | 7 |
| No. 3 fuel pipe x Fuel delivery pipe | 10 | 102 | 7 |
| High pressure side fuel pump x Cylinder head cover | 25 | 255 | 18 |
| Fuel pump resistor x Body | 5.0 | 51 | 44 in.*lbf |
| Fuel sender gauge x Fuel tank | 1.5 | 15 | 13 in.*lbf |
| Fuel vent tube set plate x Fuel tank | 6.0 | 61 | 53 in.*lbf |
| Fuel tank band x Body | 39 | 400 | 29 |
| Fuel tank protector bracket side x Fuel tank filler pipe protector | 5.4 | 55 | 48 in.*lbf |
| Fuel filler tank pipe protector x Body | 5.4 | 55 | 48 in.*lbf |
| (): For use without SST | |||
TIGHTENING TORQUE SPECIFICATIONS
| Part tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Charcoal canister x Body | 21 | 214 | 15 |
| Vacuum switching valve (PURGE VSV) x Intake manifold | 21 | 214 | 15 |
| Ventilation valve x Separator case | 3.5 | 36 | 31 in.*lbf |
TIGHTENING TORQUE SPECIFICATIONS
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Intake manifold x Cylinder head | 21 | 214 | 15 |
| Vacuum switching valve assembly x Intake manifold | 21 | 214 | 15 |
| Air cleaner case x Cylinder head cover sub-assembly | 5.0 | 51 | 44 in.*lbf |
| Intake air control valve actuator x Intake manifold | 21 | 214 | 15 |
| Intake air control valve actuator x Actuator rod | 5.4 | 55 | 48 in.*lbf |
TIGHTENING TORQUE SPECIFICATIONS
EXHAUST MANIFOLD FOR 2WD - TORQUE SPECIFICATIONS
Exhaust manifold for 2WD
| Part tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Exhaust manifold LH and RH x Cylinder head | 21 | 214 | 15 |
| No. 1 and No. 2 exhaust manifold heat insulator x Exhaust manifold | 10 | 102 | 7 |
EXHAUST MANIFOLD FOR 2WD - TORQUE SPECIFICATIONS
EXHAUST MANIFOLD FOR AWD - TORQUE SPECIFICATIONS
Exhaust manifold for AWD
| Part tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Air fuel ratio sensor (for Bank 2) x Exhaust manifold sub-assembly LH | 44 (40) | 449 (408) | 32 (30) |
| Air fuel ratio sensor (for Bank 2) x Exhaust manifold sub-assembly RH | 44 (40) | 449 (408) | 32 (30) |
| Exhaust manifold LH and RH x Cylinder head | 21 | 214 | 15 |
| No. 1 and No. 2 exhaust manifold heat insulator x Exhaust manifold | 10 | 102 | 7 |
EXHAUST MANIFOLD FOR AWD - TORQUE SPECIFICATIONS
EXHAUST PIPE - TORQUE SPECIFICATIONS
Exhaust pipe
| Part tightened | N*m | Kgf*cm | Ft.*lbf | |
|---|---|---|---|---|
| No. 1 exhaust pipe support bracket sub-assembly x Automatic transmission | 43 | 438 | 32 | |
| Front exhaust pipe assembly x Exhaust manifold LH and RH | 39 | 398 | 29 | |
| Front exhaust pipe x Tailpipe LH and RH | 39 | 398 | 29 | |
| Front floor center brace x Body | 7.4 | 75 | 65 in.*lbf | |
| Heated oxygen sensor x Front exhaust pipe assembly | Without SST | 44 (40) | 449 (408) | 32 (30) |
| Exhaust pipe damper x Exhaust pipe LH and RH | 19 | 194 | 14 | |
| (): For use with SST. | ||||
EXHAUST PIPE - TORQUE SPECIFICATIONS
| Part Tightened | N*m | Kgf*cm | Ft.*lbf | |
|---|---|---|---|---|
| Cylinder block drain cock plug x Cylinder block | 13 | 133 | 10 | |
| Vent plug x Radiator | 1.5 | 15 | 13 in.*lbf | |
| Water inlet sub-assembly x Water inlet housing | 10 | 102 | 7 | |
| Radiator reservoir assembly x Fan shroud | 5.0 | 51 | 44 in.*lbf | |
| No. 2 cooling fan motor x Fan shroud | 3.9 | 40 | 35 in.*lbf | |
| No. 1 cooling fan motor x Fan shroud | For 2WD | 2.6 | 27 | 23 in.*lbf |
| Cooling fan motor x Fan shroud | For AWD | 3.9 | 40 | 35 in.*lbf |
| No. 2 fan x No. 2 cooling fan motor | 6.3 | 64 | 56 in.*lbf | |
| No. 1 fan x No. 1 cooling fan motor | For 2WD | 6.3 | 64 | 56 in.*lbf |
| No. 1 fan x Cooling fan motor | For AWD | 6.3 | 64 | 56 in.*lbf |
| Cooling fan ECU x Fan shroud | 2.6 | 27 | 23 in.*lbf | |
| Radiator assembly x Radiator support Upper and Front crossmember | 5.0 | 51 | 44 in.*lbf | |
| Radiator upper support x Radiator support LH and RH | 8.0 | 82 | 71 in.*lbf | |
| Millimeter wave radar sensor assembly x Radiator support | 5.5 | 56 | 49 in.*lbf | |
| Cooler condenser assembly x | For AWD | 5.5 | 56 | 49 in.*lbf |
TORQUE SPECIFICATIONS
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Drain plug x Oil pan sub-assembly | 40 | 408 | 30 |
| Oil filter cap x Oil filter bracket | 25 | 255 | 18 |
| Oil filter drain plug x Oil filter cap | 13 | 133 | 10 |
| Oil pressure switch x Oil filter bracket | 15 | 153 | 11 |
| Engine oil level sensor x Oil pan | 7.0 | 71 | 62 in.*lbf |
| Crank position sensor bracket x Oil pan | 21 | 214 | 15 |
| Clamp x Clamp bracket | 5.0 | 51 | 44 in.*lbf |
TORQUE SPECIFICATIONS
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Spark plug x Cylinder head | 21 | 214 | 15 |
| Ignition coil x Cylinder head cover | 10 | 102 | 7 |
| Battery tray x Body | 5.4 | 55 | 47 in.*lbf |
| Battery clamp x Nut | 2.9 | 30 | 26 in.*lbf |
| For AWD No. 5 and No. 6 engine cover sub-assembly x Cylinder head cover | 15 | 153 | 11 |
| For AWD Engine wire x No. 1 relay block | 13 | 127 | 9 |
| Battery clamp x Nut | 5.4 | 55 | 47 in.*lbf |
| Battery cable x positive (+) battery terminal | 5.4 | 55 | 47 in.*lbf |
TORQUE SPECIFICATIONS
| Part Tightened | N*m | Kgf*cm | Ft.*lbf | |
|---|---|---|---|---|
| Starter x Engine | Bolt | 37 | 377 | 27 |
| Terminal 30 | 9.8 | 100 | 88 in.*lbf | |
| Terminal C | 6.5 | 66 | 57 in.*lbf | |
| Starter x Terminal lower cover | 10 | 102 | 7 | |
| No. 3 exhaust manifold heat insulator x Starter | 10 | 102 | 7 | |
| Starter commutator end frame x Brush holder | 3.8 | 39 | 33 in.*lbf | |
| Starter magnetic switch x Starter drive housing | 7.5 | 76 | 66 in.*lbf | |
| Starter commutator end frame x Starter drive housing | 6.0 | 61 | 53 in.*lbf | |
TORQUE SPECIFICATIONS
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Retainer x Generator rear end cover | 3.0 | 30 | 27 in.*lbf |
| Generator coil assembly x Generator rear end cover | 5.8 | 59 | 51 in.*lbf |
| Generator brush holder assembly x Generator coil assembly | 1.8 | 18 | 16 in.*lbf |
| Generator rear end cover x Generator coil assembly | 4.6 | 47 | 41 in.*lbf |
| Generator pulley x Generator rotor assembly | 133 | 1351 | 98 |
| Stud bolt x Cylinder block | 10 | 102 | 7 |
| Generator assembly x Cylinder block | 43 | 438 | 32 |
| Generator wire x Terminal B | 12 | 122 | 9 |
TORQUE SPECIFICATIONS
AUTOMATIC TRANSMISSION ASSEMBLY
| Part tightened | N*m | Kgf*cm | Ft.*lbf | |
|---|---|---|---|---|
| Automatic transmission flange yoke assembly lock nut | 126 | 1285 | 93 | |
| Refill plug x Transmission assembly | 39 | 398 | 29 | |
| Overflow plug x Transmission assembly | 20 | 204 | 15 | |
| Drain plug x Transmission assembly | 20 | 205 | 15 | |
| Park/neutral position switch x Set bolt | 13 | 133 | 10 | |
| Control shaft lever x Park/neutral position switch | 16 | 163 | 12 | |
| Lock nut x Park/neutral position switch | 6.9 | 70 | 61 in.*lbf | |
| Transmission control shaft lever RH set nut | 16 | 163 | 12 | |
| Floor shift gear shifting rod x Shift lever assembly | 13 | 133 | 10 | |
| Speed sensor (SP2 and NC3) x Transmission case | 5.4 | 55 | 48 in.*lbf | |
| Speed sensor (NT) x Transmission case | 6.8 | 69 | 60 in.*lbf | |
| Transmission valve body x Transmission case | 11 | 112 | 8 | |
| ATF temperature sensor x Transmission valve body | 10 | 102 | 7 | |
| Detent spring x Transmission valve body | 10 | 102 | 7 | |
| Valve body oil strainer assembly x Transmission valve body | 11 | 112 | 8 | |
| Shift solenoid valve SL x Transmission valve body | 10 | 102 | 7 | |
| Solenoid lock plate x Transmission valve body | 6.4 | 65 | 57 in.*lbf | |
| Shift solenoid valve SR x Transmission valve body | 10 | 102 | 7 | |
| Oil pressure switch x Transmission valve body | 4.5 | 46 | 40 in.*lbf | |
| Engine rear mounting member x Body | 26 | 265 | 19 | |
| Rear No. 1 engine mounting insulator x Transmission assembly | 37 | 377 | 27 | |
| Transmission assembly x Engine 17 mm head bolt | 71 | 724 | 52 | |
| Transmission assembly x Engine 14 mm head bolt | 37 | 377 | 27 | |
| Torque converter clutch x Drive plate | 48 | 489 | 35 | |
| Rear engine mounting member x Rear No. 1 engine mounting insulator | 13 | 133 | 10 | |
| Oil cooler tube clamp x Engine assembly | 5.0 | 50 | 44 in.*lbf | |
| Oil cooler outlet tube x Transmission assembly | Use with out SST | 44 | 449 | 32 |
| Use with SST | 39 | 398 | 29 | |
| Oil cooler inlet tube x Transmission assembly | Use with out SST | 44 | 449 | 32 |
| Use with SST | 39 | 398 | 29 | |
| Front suspension member protector lower x body | 10 | 102 | 7 | |
| No. 2 engine under cover x body | 10 | 102 | 7 | |
| 27 | 275 | 20 | ||
| Generator stud bolt x Engine assembly | 10 | 102 | 7 | |
| Generator assembly x Engine assembly (Bolt and nut) | 43 | 438 | 32 | |
| Generator assembly x Wire harness | 12 | 125 | 10 | |
| Propeller with center bearing shaft assembly x Automatic transmission flange or differential flange | 79 | 805 | 58 | |
| Propeller shaft heat insulator x body | 5.4 | 55 | 48 in.*lbf | |
| Front floor No. 1 heat insulator x body | 5.4 | 55 | 48 in.*lbf | |
| Front exhaust pipe assembly x exhaust manifold LH and RH | 39 | 398 | 29 | |
| Front exhaust pipe assembly x Tail pipe LH and RH | 39 | 398 | 29 | |
| Heated oxygen sensor x front exhaust pipe assembly | Use without SST | 44 | 449 | 32 |
| Use with SST | 40 | 408 | 30 | |
| Front floor center brace x body | 7.4 | 75 | 65 in.*lbf | |
| Oil dipstick guide | 10 | 102 | 7 | |
| Exhaust manifold heat insulator LH and RH x Exhaust manifold LH and RH | 10 | 102 | 7 | |
| Exhaust manifold sub-assembly LH and RH x Engine assembly | 21 | 214 | 15 | |
| No. 3 exhaust manifold heat insulator x starter assembly | 10 | 102 | 7 | |
| Starter assembly x Engine assembly | 37 | 377 | 27 | |
| Front suspension member reinforcement LH and RH x Body | 50 | 510 | 37 | |
| Steering sliding yoke x No. 2 steering intermediate shaft | 35 | 360 | 26 | |
| No. 2 steering intermediate shaft x Steering main shaft | 35 | 360 | 26 | |
| Stabilizer bracket LH and RH x Front suspension member reinforcement LH and RH | 49 | 500 | 36 | |
| No. 1 exhaust pipe support bracket x Transmission assembly | 43 | 438 | 32 | |
| Floor shift assembly x Body | 8.3 | 85 | 74 in.*lbf | |
AUTOMATIC TRANSMISSION ASSEMBLY TORQUE SPECIFICATIONS
AUTOMATIC TRANSMISSION UNIT
| Part tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Automatic transmission flange yoke assembly lock nut | 126 | 1285 | 93 |
| Park/Neutral position switch assembly: Bolt | 13 | 130 | 9 |
| Park/Neutral position switch assembly: Nut | 6.9 | 70 | 61 in.*lbf |
| Transmission control shaft lever RH set nut | 16 | 163 | 12 |
| Oil cooler tube union x Transmission case | 29 | 296 | 21 |
| Speed sensor (SP2) and (NT) x Transmission case | 5.4 | 55 | 48 in.*lbf |
| Speed sensor (NC) x Transmission case | 6.8 | 69 | 60 in.*lbf |
| Transmission wire x Transmission case | 5.4 | 55 | 48 in.*lbf |
| Transmission valve body x Transmission case | 11 | 112 | 8 in.*lbf |
| ATF temperature sensor x Transmission valve body | 10 | 102 | 7 |
| Detent spring x Transmission valve body | 10 | 102 | 7 |
| Valve body oil strainer assembly x Transmission valve body | 11 | 112 | 8 |
| Automatic transmission oil pan x Transmission assembly | 7.4 | 75 | 65 in.*lbf |
| Parking lock pawl bracket x Transmission case | 18 | 184 | 13 |
| Oil pump x Transmission case | 21 | 214 | 15 |
| Oil pump body x Stator shaft assembly | 11 | 110 | 8 |
| Automatic transmission case plug x Automatic transmission case | 80 | 816 | 59 |
AUTOMATIC TRANSMISSION UNIT TORQUE SPECIFICATIONS
Automatic Transmission Assembly
| Part tightened | N*m | Kgf*cm | Ft.*lbf | |
|---|---|---|---|---|
| Refill plug x Transmission assembly | 39 | 398 | 29 | |
| Overflow plug x Transmission assembly | 20 | 204 | 15 | |
| Drain plug x Transmission assembly | 20 | 205 | 15 | |
| Park/neutral position switch x Set bolt | 13 | 130 | 9 | |
| Control shaft lever x Park/neutral position switch | 16 | 160 | 12 | |
| Lock nut x Park/neutral position switch | 6.9 | 70 | 61 in.*lbf | |
| Transmission control shaft lever RH set nut | 16 | 163 | 12 | |
| Floor shift gear shifting rod x Shift lever assembly | 13 | 130 | 9 | |
| Automatic transmission oil pan x Transmission case | 7.4 | 75 | 65 in.*lbf | |
| Speed sensor (SP2 and NC3) x Transmission case | 5.4 | 55 | 48 in.*lbf | |
| Speed sensor (NT) x Transmission case | 6.8 | 69 | 60 in.*lbf | |
| Transmission valve body x Transmission case | 11 | 112 | 8 | |
| ATF temperature sensor x Transmission valve body | 10 | 102 | 7 | |
| Transmission wire connector x Transmission case | 5.4 | 55 | 48 in.*lbf | |
| Detent spring x Transmission valve body | 10 | 102 | 7 | |
| Valve body oil strainer assembly x Transmission valve body | 10 | 102 | 7 | |
| Shift solenoid valve SL x Transmission valve body | 10 | 102 | 7 | |
| Solenoid lock plate x Transmission valve body | 6.4 | 65 | 57 in.*lbf | |
| Shift solenoid valve SR x Transmission valve body | 10 | 102 | 7 | |
| Oil pressure switch x Transmission valve body | 4.5 | 46 | 40 in.*lbf | |
| Rear No. 1, No. 2 and No. 4 engine mounting insulator x Transmission assembly | 30 | 306 | 22 | |
| Rear No. 1, No. 2 and No. 4 engine mounting insulator x Rear engine mounting member | 38 | 387 | 28 | |
| Transmission assembly x Engine 17 mm head bolt | 71 | 724 | 52 | |
| Transmission assembly x Engine 14 mm head bolt | 37 | 377 | 27 | |
| Torque converter clutch x Drive plate | 48 | 489 | 35 | |
| Oil cooler tube clamp x Engine assembly | 14 | 143 | 10 | |
| Front exhaust pipe assembly x exhaust manifold LH and RH | 39 | 398 | 29 | |
| Front exhaust pipe assembly x Tail pipe LH and RH | 39 | 398 | 29 | |
| Heated oxygen sensor x front exhaust pipe assembly | Use without SST | 44 | 449 | 32 |
| Use with SST | 40 | 408 | 30 | |
| Floor shift assembly x Body | 8.3 | 85 | 74 in.*lbf | |
| TCM x Body | 5.5 | 56 | 48 in.*lbf | |
AUTOMATIC TRANSMISSION ASSEMBLY TORQUE SPECIFICATIONS
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Filler plug x Rear transfer case | 49 | 500 | 36 |
| Drain plug x Rear transfer case | 49 | 500 | 36 |
| Companion flange bolt x Output shaft companion flange | 85 | 867 | 63 |
| Transfer case plug x Rear transfer case | 98 | 1000 | 72 |
| No. 1 differential case x Transfer output shaft nut | 142 | 1448 | 105 |
TORQUE SPECIFICATIONS
Rear Propeller Shaft
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Propeller shaft heat insulator x Body | 5.4 | 55 | 48 in.*lbf |
| Front floor No. 1 heat insulator x Body | 5.4 | 55 | 48 in.*lbf |
| Intermediate shaft assembly x Adjusting nut : for use with SST | 51 | 520 | 38 |
| Intermediate shaft assembly x Adjusting nut : for use without SST | 69 | 700 | 51 |
| Propeller shaft assembly x Front flange | 79 | 805 | 58 |
| Propeller shaft assembly x Rear Differential companion flange | 79 | 805 | 58 |
| No. 1 center support bearing assembly x Body | 49 | 500 | 36 |
REAR PROPELLER SHAFT TORQUE SPECIFICATIONS
Front Propeller Shaft
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Rear engine mounting member x Body | 26 | 265 | 19 |
| Rear No. 3 engine mounting insulator x Transmission | 38 | 387 | 28 |
| Front propeller shaft assembly x Differential | 25 | 255 | 18 |
| Front propeller shaft assembly x Transfer | 25 | 255 | 18 |
FRONT PROPELLER SHAFT TORQUE SPECIFICATIONS
Rear Drive Shaft Assembly
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| No. 2 differential support protector x Rear suspension member brace LH | 5.4 | 55 | 48 in.*lbf |
| No. 1 differential support protector x Rear suspension member brace RH | 5.4 | 55 | 48 in.*lbf |
| Rear suspension member brace RH x Body | 50 | 510 | 37 |
| Rear suspension member brace LH x Body | 50 | 510 | 37 |
REAR DRIVE SHAFT ASSEMBLY TORQUE SPECIFICATIONS
Front Drive Shaft Assembly
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Wire harness bracket x Engine assembly | 12 | 122 | 9 |
FRONT DRIVE SHAFT ASSEMBLY TORQUE SPECIFICATIONS
Front Differential Assembly
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Drain plug x Differential carrier | 39 | 398 | 29 |
| Filler plug x Differential carrier | 39 | 398 | 29 |
| Differential carrier assembly x Engine assembly | 81 | 826 | 60 |
| Breather plug x Differential carrier | 21 | 214 | 16 |
| Companion flange x Differential drive pinion | 490 or less | 4996 or less | 361 or less |
| Breather plug oil deflector x Differential carrier | 7.0 | 71 | 62 in.*lbf |
| Carrier retainer x Differential carrier | 58 | 591 | 43 |
| Ring gear x Differential case sub-assembly | 97 | 989 | 72 |
FRONT DIFFERENTIAL ASSEMBLY TORQUE SPECIFICATIONS
Rear Differential Assembly
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Drain plug x Differential carrier | 49 | 500 | 36 |
| Filler plug x Differential carrier | 49 | 500 | 36 |
| Differential carrier cover x Differential carrier | 47 | 475 | 35 |
| Differential carrier cover breather plug x Differential carrier cover | 21 | 214 | 15 |
| Breather plug oil deflector x Differential carrier cover | 7.0 | 70 | 62 in.*lbf |
| Differential case x Differential ring gear | 1st: 64 | 1st: 652 | 1st: 47 |
| 2nd: turn 90° | 2nd: turn 90° | 2nd: turn 90° | |
| Companion flange rear x Differential drive pinion | 490 or less | 5000 or less | 361 or less |
| Front side: Differential carrier assembly x Rear suspension member | 127 | 1300 | 94 |
| Rear side: Differential carrier assembly x Rear suspension member | 142 | 1450 | 105 |
| Companion flange rear x Propeller w/center bearing shaft assembly | 79 | 806 | 58 |
| Rear suspension member x Body | 127 | 1300 | 94 |
| Rear suspension member x Rear suspension member stopper lower | 19 | 195 | 14 |
| Rear suspension member brace x Rear suspension member | 50 | 510 | 37 |
| Rear suspension member brace x Differential support protector | 5.4 | 55 | 48 in.*lbf |
| Rear suspension member x Rear suspension member damper | 25 | 255 | 18 |
| Parking brake release cable x Body | 8.0 | 82 | 71 in.*lbf |
REAR DIFFERENTIAL ASSEMBLY TORQUE SPECIFICATIONS
Front Axle
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Front wheel set bolt | 140 | 1428 | 103 |
| Steering knuckle x Front disc brake caliper flexible hose | 20 | 204 | 15 |
| Steering knuckle x Front disc brake caliper | 135 | 1377 | 100 |
| Steering knuckle x Front No. 1 suspension upper arm assembly | 60 | 612 | 44 |
| Steering knuckle x Front No. 2 suspension upper arm assembly | 60 | 612 | 44 |
| Steering knuckle x Tie rod assembly | 60 | 612 | 44 |
| Steering knuckle x Front No. 1 suspension lower arm assembly (for 2WD) | 145 | 1479 | 107 |
| Steering knuckle x Front No. 2 suspension lower arm assembly (for 2WD) | 145 | 1479 | 107 |
| Steering knuckle x Front lower ball joint (for 2WD) | 113 | 1149 | 83 |
| Steering knuckle x Front disc brake dust cover | 8.0 | 82 | 71 in.*lbf |
| Steering knuckle x Front axle hub sub-assembly | 65 | 663 | 48 |
| Front No. 1 suspension lower arm assembly x Speed sensor wire (for 2WD) | 8.5 | 87 | 75 in.*lbf |
| Front No. 1 suspension lower arm assembly x Speed sensor wire (for 2WD) | 8.5 | 87 | 75 in.*lbf |
| Front No. 1 suspension lower arm assembly x Speed sensor wire (for 2WD) | 8.5 | 87 | 75 in.*lbf |
| Front No. 1 suspension lower arm assembly x Speed sensor connector (for 2WD) | 8.5 | 87 | 75 in.*lbf |
| Front No. 2 suspension lower arm assembly x Front shock absorber assembly (for 2WD) | 108 | 1101 | 80 |
| Front No. 2 suspension lower arm assembly x Front height control sensor sub-assembly (for 2WD) | 5.4 | 55 | 48 in.*lbf |
| Front No. 2 suspension lower arm assembly x Front stabilizer link assembly (for 2WD) | 84 | 857 | 62 |
| Front stabilizer bar x Front stabilizer link assembly (for 2WD) | 84 | 857 | 62 |
| Front drive shaft x Front axle shaft nut (for 2WD) | 294 | 2998 | 217 |
FRONT AXLE TORQUE SPECIFICATIONS
Rear Axle
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Rear wheel set bolt | 140 | 1428 | 103 |
| Rear axle carrier x Rear disc brake caliper assembly | 86 | 877 | 63 |
| Rear axle carrier x Rear shock absorber assembly | 80 | 816 | 59 |
| Rear axle carrier x Rear upper No. 1 control arm assembly | 160 | 1632 | 118 |
| Rear axle carrier x Rear upper No. 2 control arm assembly | 160 | 1632 | 118 |
| Rear axle carrier x Toe control link sub-assembly | 118 | 1203 | 87 |
| Rear axle carrier x Rear No. 1 suspension arm assembly | 118 | 1203 | 87 |
| Rear axle carrier x Rear No. 2 suspension arm assembly | 225 | 2294 | 166 |
| Rear axle carrier x Speed sensor rear | 8.5 | 87 | 75 in.*lbf |
| Rear axle carrier x Rear axle hub and bearing assembly | 97 | 989 | 72 |
| Rear axle carrier x Parking brake anchor block | 76 | 775 | 56 |
| Toe control link sub-assembly x Load sensing valve sensor bracket | 3.6 to 6.9 | 37 to 70 | 32 to 61 in.*lbf |
| Rear suspension member x Rear No. 2 suspension arm assembly | 150 | 1530 | 111 |
| Rear stabilizer link assembly x Rear No. 2 suspension arm assembly | 26 | 265 | 19 |
| Rear drive shaft x Rear axle shaft nut | 290 | 2957 | 214 |
REAR AXLE TORQUE SPECIFICATIONS
| Part tightened | N*m | Kgf*cm | Ft.*lbf | |
|---|---|---|---|---|
| Height control compressor x Body | Bolt | 19.1 | 195 | 14 |
| Nut | ||||
| Height control compressor x Bracket | 5.9 | 60 | 52 in.*lbf | |
| Height control sensor sub-assembly (for Front) x Body | 13.5 | 138 | 10 | |
| Height control sensor sub-assembly (for Front) x Lower arm | 5.4 | 55 | 48 in.*lbf | |
| Height control sensor sub-assembly (for Rear) x Rear suspension member | 13.5 | 138 | 10 | |
| Height control sensor sub-assembly (for Rear) x Load sensing valve sensor bracket | 3.6 to 6.9 | 37 to 70 | 32 to 61 in.*lbf | |
| Load sensing valve sensor bracket x Lower arm | 3.6 to 6.9 | 37 to 70 | 32 to 61 in.*lbf | |
| Height control valve (for Front Side) x Body | 5.4 | 55 | 48 in.*lbf | |
| Height control valve (for Rear Side) x Body | 5.4 | 55 | 48 in.*lbf | |
| Front acceleration sensor x Instrument panel reinforcement | 8.5 | 87 | 75 in.*lbf | |
| Rear acceleration sensor x Body | 8.5 | 87 | 75 in.*lbf | |
| Suspension control ECU x Bracket | 6.0 | 61 | 53 in.*lbf | |
| Front shock absorber cap x Body | 19.8 | 202 | 15 | |
| Rear shock absorber cap x Body | 14 | 143 | 10 | |
SUSPENSION CONTROL TORQUE SPECIFICATIONS
FRONT SUSPENSION (FOR 2WD) TORQUE SPECIFICATIONS
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Front shock absorber x Body | 67 | 683 | 49 |
| Front shock absorber x Front No. 2 suspension lower arm | 108 | 1101 | 80 |
| Front stabilizer link x Front No. 2 suspension lower arm Front stabilizer bar x Front stabilizer link | 84 | 857 | 62 |
| Front suspension crossmember x Front No. 2 suspension lower arm | 145 | 1479 | 107 |
| Steering knuckle x Front No. 2 suspension lower arm | 145 | 1479 | 107 |
| Front No. 2 suspension lower arm x Front height control sensor | 5.4 | 55 | 48 in.*lbf |
| Front speed sensor x Front No. 1 suspension lower arm | 8.5 | 87 | 75 in.*lbf |
| Steering knuckle x Front brake flexible hose | 20 | 204 | 15 |
| Steering knuckle x Front disc brake caliper | 135 | 1377 | 100 |
| Steering knuckle x Tie rod end | 60 | 612 | 44 |
| Front No. 1 suspension lower arm x Steering knuckle | 145 | 1479 | 107 |
| Steering knuckle x Front disc brake dust cover | 8.0 | 82 | 71 in.*lbf |
| Front support to front shock absorber nut | 28 | 280 | 20 |
| Front shock absorber x Pneumatic cylinder with front shock absorber | 19.8 | 202 | 15 |
| Pneumatic cylinder with front shock absorber x Body | 67 | 683 | 49 |
| No. 1 arm attachment plate inner x Body No. 2 arm attachment plate inner x Body | 32 | 326 | 24 |
| No. 2 arm attachment plate inner x Front No. 2 suspension upper arm No. 1 arm attachment plate inner x Front No. 1 suspension upper arm | 50 | 510 | 37 |
| Front No. 1 suspension upper arm x Steering knuckle Front No. 2 suspension upper arm x Steering knuckle | 60 | 612 | 44 |
| Front suspension crossmember reinforcement x Body | 50 | 510 | 37 |
| Front No. 1 stabilizer bracket x Body | 49 | 500 | 36 |
FRONT SUSPENSION (FOR 2WD) TORQUE SPECIFICATIONS
FRONT SUSPENSION (FOR AWD) TORQUE SPECIFICATIONS
Front suspension (for AWD)
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Front shock absorber cap x Front pneumatic shock absorber with cylinder assembly | 20 | 204 | 15 |
| Front pneumatic shock absorber with cylinder assembly x Body | 67 | 683 | 49 |
| Front pneumatic shock absorber with cylinder assembly x Lower front shock absorber bracket | 48 | 489 | 35 |
| Front pneumatic shock absorber with cylinder assembly x Skid control sensor wire | 8.5 | 87 | 75 in.*lbf |
| Lower front shock absorber bracket x Front No. 1 suspension lower arm | 112 | 1142 | 83 |
| Front stabilizer link x Front No. 1 suspension lower arm Front stabilizer bar x Front stabilizer link | 85 | 867 | 63 |
| Front suspension crossmember x Front No. 1 suspension lower arm | 210 | 2141 | 155 |
| Front suspension lower arm x Front lower ball joint | 145 | 1479 | 107 |
| Front suspension crossmember x Front No. 2 suspension lower arm | 210 | 2141 | 155 |
| Front No. 2 suspension lower arm x Front lower ball joint | 145 | 1479 | 107 |
| Front No. 2 suspension lower arm x Front height control sensor | 5.4 | 55 | 48 in.*lbf |
| Steering knuckle x Front brake flexible hose | 20 | 204 | 15 |
| Steering knuckle x Front disc brake caliper | 135 | 1377 | 100 |
| Steering knuckle x Tie rod end | 60 | 612 | 44 |
| Front No. 1 suspension lower arm x Steering knuckle | 113 | 1152 | 83 |
| Steering knuckle x Front disc brake dust cover | 8.0 | 82 | 71 in.*lbf |
| Steering knuckle x Front speed sensor | 8.5 | 87 | 75 in.*lbf |
| Steering knuckle x Skid control sensor wire | 8.5 | 87 | 75 in.*lbf |
| Inner No. 1 arm attachment plate x Body Inner No. 2 arm attachment plate x Body | 32 | 326 | 24 |
| Inner No. 1 arm attachment plate x Front No. 1 suspension upper arm Inner No. 2 arm attachment plate x Front No. 2 suspension upper arm | 50 | 510 | 37 |
| Front No. 1 suspension upper arm x Steering knuckle Front No. 2 suspension upper arm x Steering knuckle | 60 | 612 | 44 |
| Front suspension crossmember x Front No. 1 stabilizer bracket | 95 | 969 | 70 |
| Front No. 1 stabilizer bracket x No. 2 front stabilizer bracket | 22 | 224 | 16 |
FRONT SUSPENSION (FOR AWD) TORQUE SPECIFICATIONS
REAR SUSPENSION TORQUE SPECIFICATIONS
Rear suspension
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Rear support to rear shock absorber nut | 27 | 275 | 20 |
| Rear shock absorber cap x Rear shock absorber | 14 | 143 | 10 |
| Rear shock absorber x Body | 64 | 653 | 47 |
| Rear shock absorber x Rear axle carrier | 80 | 816 | 59 |
| Rear upper No. 1 control arm x Rear axle carrier | 160 | 1632 | 118 |
| Rear upper No. 2 control arm x Rear axle carrier | 160 | 1632 | 118 |
| Toe control link x Rear axle carrier | 118 | 1203 | 87 |
| Rear axle shaft nut | 290 | 2957 | 214 |
| Load sensing sensor bracket x Toe control link | 3.6 to 6.9 | 37 to 70 | 32 to 61 in.*lbf |
| Rear speed sensor x Rear axle carrier | 8.5 | 87 | 75 |
| Rear shock absorber cap x Pneumatic cylinder with rear shock absorber | 14 | 143 | 10 |
| Pneumatic cylinder with rear shock absorber x Body | 64 | 653 | 47 |
| Pneumatic cylinder with rear shock absorber x Rear axle carrier | 80 | 816 | 59 |
| Rear upper No. 1 control arm x Rear suspension member | 150 | 1530 | 111 |
| Rear upper No. 2 control arm x Rear suspension member | 225 | 2294 | 166 |
| Rear disc brake caliper x Rear axle carrier | 86 | 877 | 63 |
| Rear No. 1 suspension arm x Rear suspension member | 72 | 734 | 53 |
| Rear No. 2 suspension arm x Rear suspension member | 150 | 1530 | 111 |
| Rear No. 2 suspension arm x Rear axle carrier | 225 | 2294 | 166 |
| Toe control link x Rear suspension member | 60 | 612 | 44 |
| Rear stabilizer bar x Rear stabilizer link | 89 | 908 | 66 |
| Rear stabilizer link x Rear No. 2 suspension arm | 26 | 265 | 19 |
| Rear stabilizer bar x Rear suspension member | 48 | 489 | 35 |
| Parking brake cable x Body | 8.0 | 82 | 71 in.*lbf |
| Rear suspension member x Body for standard package | 127 | 1295 | 94 |
| Rear suspension member x Body for sports package | Bolt A: 19 | Bolt A: 194 | Bolt A: 14 |
| Bolt B: 127 | Bolt B: 1295 | Bolt B: 94 |
REAR SUSPENSION TORQUE SPECIFICATIONS
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Tire pressure warning valve and transmitter x Nut | 4.0 | 41 | 35 in.*lbf |
| Tire pressure warning receiver w/ antenna x Body | 7.5 | 77 | 66 |
| Tire pressure warning ECU x Body | 5.5 | 56 | 49 |
TORQUE SPECIFICATIONS
Brake Actuator
| Part tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Brake actuator x No. 3 brake actuator bracket | 9.3 | 95 | 82 in.*lbf |
| Brake actuator x Brake actuator bracket | 9.2 | 94 | 81 in.*lbf |
| Brake actuator x No. 4 brake actuator bracket | 18 | 184 | 13 |
| Brake actuator x Brake accumulator pump connector box | 6.0 | 61 | 53 in.*lbf |
| Brake tube flare nut (without union nut wrench) | 15 | 155 | 11 |
| Brake tube flare nut (with union nut wrench) | 14 | 145 | 10 |
| No. 5 brake actuator bracket x Body | 11 | 112 | 8 |
| Brake actuator and brake accumulator pump assembly bolt | 20 | 204 | 15 |
| Brake actuator and brake accumulator pump assembly nut |
BRAKE ACTUATOR TORQUE SPECIFICATIONS
FRONT SPEED SENSOR (FOR 2WD) TORQUE SPECIFICATIONS
Front Speed Sensor (for 2WD)
| Part tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Skid control sensor wire clamp bolt | 8.5 | 87 | 75 in.*lbf |
FRONT SPEED SENSOR (FOR 2WD) TORQUE SPECIFICATIONS
FRONT SPEED SENSOR (FOR AWD) TORQUE SPECIFICATIONS
Front Speed Sensor (for AWD)
| Part tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Front speed sensor bolt | 8.5 | 87 | 75 in.*lbf |
| Skid control sensor wire clamp bolt | 8.5 | 87 | 75 in.*lbf |
FRONT SPEED SENSOR (FOR AWD) TORQUE SPECIFICATIONS
REAR SPEED SENSOR TORQUE SPECIFICATIONS
Rear speed sensor
| Part tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Rear speed sensor bolt | 8.5 | 87 | 75 in.*lbf |
| Skid control sensor wire clamp bolt | |||
| Skid control sensor wire clamp nut | 5.5 | 56 | 49 in.*lbf |
REAR SPEED SENSOR TORQUE SPECIFICATIONS
YAW RATE SENSOR TORQUE SPECIFICATIONS
Yaw Rate Sensor
| Part tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Yaw rate sensor bolt | 9.0 | 92 | 80 in.*lbf |
YAW RATE SENSOR TORQUE SPECIFICATIONS
SKID CONTROL ECU TORQUE SPECIFICATIONS
Skid Control ECU
| Part tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Skid control ECU bracket bolt | 8.5 | 87 | 75 in.*lbf |
| Skid control ECU bracket nut | |||
| Skid control ECU bolt | |||
| Skid control ECU nut |
SKID CONTROL ECU TORQUE SPECIFICATIONS
BRAKE CONTROL POWER SUPPLY TORQUE SPECIFICATIONS
Brake Control Power Supply
| Part tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Brake control power supply assembly x No. 1 brake control power supply bracket | 8.5 | 87 | 75 in.*lbf |
| Brake control power supply assembly x Body | 8.0 | 82 | 71 in.*lbf |
BRAKE CONTROL POWER SUPPLY TORQUE SPECIFICATIONS
BRAKE PEDAL STROKE SENSOR TORQUE SPECIFICATIONS
Brake Pedal Stroke Sensor
| Part tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Brake pedal stroke sensor bolt | 8.5 | 87 | 75 in.*lbf |
BRAKE PEDAL STROKE SENSOR TORQUE SPECIFICATIONS
Brake Pedal Support
| Part tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Master cylinder push rod clevis lock nut | 26 | 265 | 19 |
| Stop light switch lock nut | 17 | 170 | 12 |
| Brake pedal stroke sensor bolt | 8.5 | 87 | 75 in.*lbf |
| Brake pedal support x Brake pedal | 28 | 290 | 21 |
| Brake pedal support bolt | 19 | 195 | 14 |
| Brake pedal support x Brake master cylinder with simulator | 13 | 130 | 9 |
BRAKE PEDAL SUPPORT TORQUE SPECIFICATIONS
Brake Master Cylinder
| Part tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Brake master cylinder reservoir screw | 1.8 | 18 | 16 in.*lbf |
| Brake master cylinder with simulator x Brake stroke simulator bracket | 8.0 | 82 | 71 in.*lbf |
| Brake master cylinder with simulator x Brake master cylinder bracket | 12.5 | 128 | 9 |
| Brake tube flare nut (without union nut wrench) | 15 | 155 | 11 |
| Brake tube flare nut (with union nut wrench) | 14 | 145 | 10 |
| Master cylinder push rod clevis lock nut | 26 | 265 | 19 |
| Brake master cylinder with simulator x Brake pedal support | 13 | 130 | 9 |
| Reservoir bracket x Body | 8.5 | 87 | 75 in.*lbf |
| Brake fluid reservoir bolt |
BRAKE MASTER CYLINDER TORQUE SPECIFICATIONS
Front Brake
| Part tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Front disc brake caliper bolt | 135 | 1377 | 100 |
| Flexible hose x Disc brake caliper | 39 | 400 | 29 |
| Bleeder plug | 11 | 110 | 8 |
FRONT BRAKE TORQUE SPECIFICATIONS
Front Brake Flexible Hose
| Part tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Flexible hose x Disc brake caliper | 39 | 400 | 29 |
| Flexible hose clamp bolt | 20 | 204 | 15 |
| Brake tube x Flexible hose (without union nut wrench) | 15 | 155 | 11 |
| Brake tube x Flexible hose (with union nut wrench) | 14 | 145 | 10 |
FRONT BRAKE FLEXIBLE HOSE TORQUE SPECIFICATIONS
Rear Brake
| Part tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Rear disc brake caliper bolt | 86 | 877 | 63 |
| Flexible hose x Disc brake caliper | 39 | 400 | 29 |
| Bleeder plug | 11 | 110 | 8 |
REAR BRAKE TORQUE SPECIFICATIONS
Rear Brake Flexible Hose
| Part tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Flexible hose x Disc brake caliper | 39 | 400 | 29 |
| Brake tube x Flexible hose (without union nut wrench) | 15 | 155 | 11 |
| Brake tube x Flexible hose (with union nut wrench) | 14 | 145 | 10 |
REAR BRAKE FLEXIBLE HOSE TORQUE SPECIFICATIONS
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Wheel nut | 140 | 1428 | 103 |
| Parking brake lock nut | 8.0 | 82 | 71 |
| Parking brake anchor block x Cable support bracket | 76 | 775 | 56 |
| Rear disc brake caliper assembly set bolt | 86 | 877 | 63 |
| Electric parking brake actuator assembly x parking brake actuator support bracket | 16 | 163 | 12 |
| Electric parking brake actuator assembly x Rear suspension member sub-assembly | 18 | 184 | 13 |
| Cable support bracket x Rear suspension member sub-assembly | 8.0 | 82 | 71 in.*lbf |
| Electric parking brake ECU x Body | 5.5 | 56 | 49 |
TORQUE SPECIFICATIONS
| Part tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Steering pad x Steering wheel assembly | 8.8 | 90 | 78 in.*lbf |
| Steering wheel set nut | 50 | 510 | 37 |
| Steering column cover set screws | 2.0 | 20 | 18 in.*lbf |
| Steering column assembly set nuts | 26 | 260 | 19 |
| No. 1 Air duct sub-assembly x Steering column | 9.8 | 100 | 87 in.*lbf |
| Steering intermediate shaft assembly No. 2 x Steering column assembly | 35 | 360 | 26 |
| Steering intermediate shaft assembly No. 2 x Steering sliding yoke with shaft sub-assembly | 35 | 360 | 26 |
| Steering sliding yoke with shaft sub-assembly x Power steering link assembly (w/ VGRS) | 35 | 360 | 26 |
| Steering sliding yoke with shaft sub-assembly x Steering intermediate shaft (w/o VGRS) | 35 | 360 | 26 |
| Steering intermediate shaft x Power steering link assembly (w/o VGRS) | 35 | 360 | 26 |
| Multiplex tilt and telescopic ECU set screws | 1.5 | 15 | 13 in.*lbf |
| Steering control ECU x Body | 5.5 | 56 | 49 in.*lbf |
TORQUE SPECIFICATIONS
STEERING GEAR (w/o VGRS)
| Part tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Front suspension member protector lower x Body | 10 | 102 | 7 |
| No. 2 Engine under cover x body | 10 | 102 | 7 |
| No. 2 Engine under cover x body | 27 | 275 | 20 |
| No. 2 Steering intermediate shaft assembly x Steering sliding yoke with shaft assembly | 35 | 360 | 26 |
| Steering intermediate shaft x Steering sliding yoke with shaft sub-assembly | 35 | 360 | 26 |
| Steering intermediate shaft x Power steering link assembly | 35 | 360 | 26 |
| Steering rack housing bracket x Power steering link assembly | 70 | 714 | 52 |
| Tie rod end x Steering knuckle | 60 | 612 | 44 |
| Tie rod assembly x Power steering link | 56 | 570 | 41 |
| Steering rack end sub-assembly x Power steering link assembly (w/ o SST) | 145 | 1479 | 107 |
| Steering rack end sub-assembly x Power steering link assembly (w/ SST) | 110 | 1122 | 81 |
STEERING GEAR (W/O VGRS) TORQUE SPECIFICATIONS
STEERING GEAR (w/ VGRS)
| Part tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Front suspension member protector lower x Body (for 2WD) | 10 | 102 | 7 |
| No. 2 Engine under cover x body (for 2WD) | 10 | 102 | 7 |
| No. 2 Engine under cover x body (for 2WD) | 27 | 275 | 20 |
| No. 2 Steering intermediate shaft assembly x Steering sliding yoke with shaft assembly (for 2WD) | 35 | 360 | 26 |
| Steering intermediate shaft x Steering sliding yoke with shaft sub-assembly (for 2WD) | 35 | 360 | 26 |
| Steering intermediate shaft x Power steering link assembly (for 2WD) | 35 | 360 | 26 |
| Steering rack housing bracket x Power steering link assembly (for 2WD) | 70 | 714 | 52 |
| Front suspension member protector lower x Body (for AWD) | 20 | 204 | 15 |
| Front suspension member protector lower x Body (for AWD) | 50 | 510 | 37 |
| Front No. 1 stabilizer bracket x Body (for AWD) | 95 | 969 | 70 |
| Front stabilizer bar x Stabilizer link (for AWD) | 85 | 867 | 63 |
| No. 2 Front stabilizer bracket RH x Front No. 1 stabilizer bracket LH (for AWD) | 22 | 224 | 16 |
| Tie rod end x Steering knuckle | 60 | 612 | 44 |
| Tie rod assembly x Power steering link | 56 | 570 | 41 |
| Steering rack end sub-assembly x Power steering link assembly (w/ o SST) | 145 | 1479 | 107 |
| Steering rack end sub-assembly x Power steering link assembly (w/ SST) | 110 | 1122 | 81 |
STEERING GEAR (W/ VGRS) TORQUE SPECIFICATIONS
Power steering ECU
| Part tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Power steering ECU x Body | 8.5 | 87 | 75 |
POWER STEERING ECU TORQUE SPECIFICATIONS
DC-DC Converter
| Part tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| DC-DC Converter x Body | 8.5 | 87 | 75 |
DC-DC CONVERTER TORQUE SPECIFICATIONS
REFRIGERANT LINE
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Air conditioning tube and accessory assembly x Air conditioning unit (for Front side) | 9.8 | 100 | 7 |
| No. 1 cooler refrigerant discharge hose x Air conditioning tube and accessory assembly | 9.8 | 100 | 7 |
| Air conditioning tube and accessory assembly x Tube and accessory assembly | 5.4 | 55 | 48 in.*lbf |
| No. 1 cooler refrigerant discharge hose x Cooler condenser assembly | 5.4 | 55 | 48 in.*lbf |
| No. 1 cooler refrigerant suction hose x Cooler condenser assembly | 5.4 | 55 | 48 in.*lbf |
| No. 1 cooler refrigerant discharge hose x Cooler compressor assembly | 9.8 | 100 | 7 |
| No. 1 cooler refrigerant suction hose x Cooler compressor assembly | 9.8 | 100 | 7 |
| No. 1 cooler refrigerant discharge hose x Vehicle body | 9.8 | 100 | 7 |
| Tube and accessory assembly x Vehicle body | 9.8 | 100 | 7 |
| Tube and accessory assembly x Air conditioning unit (for Rear side) | 9.8 | 100 | 7 |
REFRIGERANT LINE TORQUE SPECIFICATIONS
AIR CONDITIONING UNIT (for Front Side)
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Instrument panel reinforcement assembly x Vehicle body | 20 | 204 | 15 |
| Air conditioning unit x Instrument panel reinforcement assembly | 9.8 | 100 | 7 |
| A/C tube x Evaporator assembly | 3.5 | 35 | 30 in.*lbf |
AIR CONDITIONING UNIT (FOR FRONT SIDE) TORQUE SPECIFICATIONS
AIR CONDITIONING UNIT (for Rear Side)
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Tube and accessory x Evaporator assembly | 3.5 | 35 | 30 in.*lbf |
AIR CONDITIONING UNIT (FOR REAR SIDE) TORQUE SPECIFICATIONS
COMPRESSOR AND MAGNETIC CLUTCH
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Discharge hose sub-assembly x Cooler compressor assembly | 9.8 | 100 | 7 |
| Suction hose sub-assembly x Cooler compressor assembly | 9.8 | 100 | 7 |
| Cooler compressor assembly x Engine | 24.5 | 250 | 18 |
| Cooler compressor assembly (Stud bolt) | 10 | 102 | 7 |
COMPRESSOR AND MAGNETIC CLUTCH TORQUE SPECIFICATIONS
CONDENSER
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Discharge hose sub-assembly x cooler condenser assembly | 5.5 | 51 | 44 in.*lbf |
| Liquid tube sub-assembly x cooler condenser assembly | 5.5 | 51 | 44 in.*lbf |
| Cooler condenser assembly x Vehicle Body | 5.0 | 51 | 44 in.*lbf |
| Cooler condenser assembly x Cap | 4.1 | 42 | 36 in.*lbf |
CONDENSER TORQUE SPECIFICATIONS
SEAT BELT CONTROL ECU
| Part tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Seat belt control ECU x Vehicle body | 5.5 | 56 | 49 in.*lbf |
SEAT BELT CONTROL ECU TORQUE SPECIFICATIONS
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Steering wheel x Steering pad | 8.8 | 90 | 78 in.*lbf |
| Driver side knee airbag assembly x Instrument panel | 10 | 102 | 7 |
| Front passenger side knee airbag assembly x Instrument panel | 10 | 102 | 7 |
| Curtain shield airbag assembly x Body | 11 | 110 | 8 |
| Center airbag sensor assembly x Body | 18 | 184 | 13 |
| Front airbag sensor x Body | 9.0 | 92 | 80 in.*lbf |
| Side airbag sensor assembly x Body | 9.0 | 92 | 80 in.*lbf |
| Rear airbag sensor x Body | 9.0 | 92 | 80 in.*lbf |
| Seat position airbag sensor x Front seat | 8.0 | 82 | 71 in.*lbf |
TORQUE SPECIFICATIONS
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| FRONT SEAT BELT | |||
| Front seat inner belt assembly x Front seat | 42 | 428 | 31 |
| Front seat outer belt assembly (floor anchor) x Front seat | 42 | 428 | 31 |
| Front seat outer belt assembly (shoulder anchor) x Front shoulder belt anchor adjuster assembly | 42 | 428 | 31 |
| Front seat outer belt assembly (upper part of retractor) x Body | 7.5 | 76 | 66 in.*lbf |
| Front seat outer belt assembly (lower part of retractor) x Body | 42 | 428 | 31 |
| Front shoulder belt anchor adjuster assembly x Body | 42 | 428 | 31 |
| REAR SEAT BELT | |||
| Rear seat inner belt assembly LH (for Power Seat) x Rear No. 1 seat adjuster sub-assembly | 42 | 428 | 31 |
| Rear seat inner belt assembly RH (for Power Seat) x Rear No. 2 seat adjuster sub-assembly | 42 | 428 | 31 |
| Rear seat inner belt assembly center (for Power Seat) x Rear No. 1 seat adjuster sub-assembly | 42 | 428 | 31 |
| Rear seat inner belt assembly center (for Fixed Seat Type) x Body | 42 | 428 | 31 |
| Rear seat inner belt assembly (for Fixed Seat Type) x Body | 42 | 428 | 31 |
| Rear seat outer belt assembly center (rear part of retractor) x Body | 42 | 428 | 31 |
| Rear seat outer belt assembly center (front part of retractor) x Body | 7.5 | 76 | 66 in.*lbf |
| Rear seat outer belt assembly center (retractor) x Body | 42 | 428 | 31 |
| Rear seat outer belt assembly (floor anchor) x Body | 42 | 428 | 31 |
| Rear seat outer belt assembly center (floor anchor) x Body (for Power Seat) | 42 | 428 | 31 |
| Rear seat outer belt assembly center (floor anchor) x Body (for Fixed Seat Type) | 42 | 428 | 31 |
| Child restraint seat tether anchor bracket x Body | 21 | 214 | 15 |
| Child restraint seat anchor bracket sub-assembly x Body | 33 | 337 | 24 |
| Child restraint seat anchor bracket sub-assembly inner x Body | 33 | 337 | 24 |
TORQUE SPECIFICATIONS
REFRIGERANT LINE
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Steering pad assembly x Steering wheel assembly | 8.8 | 90 | 78 in.*lbf |
| Millimeter wave radar sensor assembly x Body | 5.5 | 56 | 49 in.*lbf |
REFRIGERANT LINE TORQUE SPECIFICATIONS
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Front height control sensor x Body | 8.0 | 82 | 71 in.*lbf |
| Front height control sensor x Lower arm | 5.4 | 55 | 48 in.*lbf |
| Rear height control sensor x Rear suspension member | 8.0 | 82 | 71 in.*lbf |
| Rear height control sensor x Lower arm | 5.4 | 55 | 48 in.*lbf |
| Stop light switch x Brake pedal support | 17 | 170 | 12 |
| Luggage door closer x Body | 5.5 | 56 | 49 in.*lbf |
TORQUE SPECIFICATIONS
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Front wiper arm LH x Windshield wiper link assembly | 22 | 224 | 16 |
| Front wiper arm LH x Windshield wiper link assembly | 5.5 | 56 | 49 in.*lbf |
| Front wiper arm RH x Windshield wiper link assembly | 22 | 224 | 16 |
| Windshield wiper link assembly x Body | 5.5 | 56 | 49 in.*lbf |
| Windshield wiper motor assembly x Windshield wiper link assembly | 5.5 | 56 | 49 in.*lbf |
| Windshield wiper motor assembly x Clank arm | 18 | 184 | 14 |
| Windshield washer jar assembly x Body | 5.5 | 56 | 49 in.*lbf |
TORQUE SPECIFICATIONS
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Amplifier antenna x Body | 14 | 143 | 10 |
| No. 2 Antenna cord x Body | 6.9 to 9.8 | 70 to 99 | 61 to 86 in.*lbf |
TORQUE SPECIFICATIONS
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Battery current sensor x Body | 10 | 102 | 7 |
TORQUE SPECIFICATIONS
LOW PITCHED HORN
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Low pitched horn x Body | 19 | 194 | 14 |
LOW PITCHED HORN TORQUE SPECIFICATIONS
HIGH PITCHED HORN
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| High pitched horn x Body | 19 | 194 | 14 |
HIGH PITCHED HORN TORQUE SPECIFICATIONS
TELEPHONE ANTENNA
| Part tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Telephone antenna x Antenna nut | 4.5 | 46 | 40 in.*lbf |
TELEPHONE ANTENNA TORQUE SPECIFICATIONS
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Wiper arm x Windshield wiper link | 22 | 224 | 16 |
| Front wiper arm LH x Body | 5.5 | 56 | 49 in.*lbf |
TORQUE SPECIFICATIONS
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Outer rear view mirror assembly x Door panel | 5.5 | 56 | 49 in.*lbf |
TORQUE SPECIFICATIONS
INSTRUMENT PANEL SAFETY PAD
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Steering wheel assembly x Steering column assembly | 50 | 510 | 37 |
| Steering wheel assembly x Steering pad assembly | 8.8 | 90 | 78 in.*lbf |
| Front passenger airbag assembly x Instrument panel reinforcement | 20 | 204 | 15 |
| Driver side knee airbag assembly x Instrument panel reinforcement | 10 | 102 | 7 |
| Front passenger side knee airbag assembly x Instrument panel reinforcement | 10 | 102 | 7 |
INSTRUMENT PANEL SAFETY PAD TORQUE SPECIFICATIONS
FRONT SEAT ASSEMBLY
| Part Tightened | N*m | Kgf*cm | Ft.*lbf | |
|---|---|---|---|---|
| Front seat assembly x Vehicle body | 37 | 377 | 27 | |
| Front seat cushion assembly x Front seat adjuster assembly | 21 | 214 | 15 | |
| Front seatback frame assembly x Front seat adjuster assembly | 43 | 439 | 32 | |
| Front seatback cover x Front seatback frame assembly | 5.5 | 56 | 49 in.*lbf | |
| Front seat headrest adjuster sub-assembly x Front seatback frame assembly | W/o Retractable headrest | 5.5 | 56 | 49 in.*lbf |
| Front seat headrest adjuster sub-assembly x Front seatback frame assembly | W/ Retractable Headrest | 21 | 214 | 15 |
| Front seat travel link x Front seat adjuster assembly | 21 | 214 | 15 | |
FRONT SEAT ASSEMBLY TORQUE SPECIFICATIONS
REAR SEAT ASSEMBLY (for Power Seat)
| Part Tightened | N*m | Kgf*cm | Ft.*lbf | |
|---|---|---|---|---|
| Rear seatback assembly x Rear seat adjuster assembly | 20 | 204 | 15 | |
| Rear seat adjuster assembly x Vehicle body | For Bolt | 20 | 204 | 15 |
| For Nut | 20 | 204 | 15 | |
| Rear seat belt inner anchor bracket assembly x Vehicle body | 42 | 428 | 31 | |
| Rear seatback adjuster assembly x Vehicle body | 20 | 204 | 15 | |
| Rear seatback assembly center x Vehicle body | For Bolt | 20 | 204 | 15 |
| For Nut | 20 | 204 | 15 | |
| Rear seatback cover sub-assembly x Rear seatback spring assembly | 5.6 | 57 | 50 in.*lbf | |
| Rear seat belt inner anchor bracket assembly x Rear seat adjuster assembly | 21 | 214 | 15 | |
| Rear seat headrest assembly center x Center seatback frame sub-assembly | 20 | 204 | 15 | |
| Rear seat center armrest assembly x Center seatback frame sub-assembly | 20 | 204 | 15 | |
REAR SEAT ASSEMBLY (FOR POWER SEAT) TORQUE SPECIFICATIONS
REAR SEAT ASSEMBLY (for Ottoman)
| Part Tightened | N*m | Kgf*cm | Ft.*lbf | |
|---|---|---|---|---|
| Rear seatback assembly x Rear seat adjuster assembly | 20 | 204 | 15 | |
| Rear seat adjuster assembly x Rear seat cushion airbag assembly | 20 | 204 | 15 | |
| Rear seat adjuster assembly x Vehicle body | For Bolt | 20 | 204 | 15 |
| For Nut | 20 | 204 | 15 | |
| Rear seat belt inner anchor bracket assembly x Vehicle body | 42 | 428 | 31 | |
| Rear seatback adjuster assembly x Vehicle body | 20 | 204 | 15 | |
| Rear seatback cover sub-assembly x Rear seatback spring assembly | 5.6 | 57 | 50 in.*lbf | |
| Rear seat belt inner anchor bracket assembly x Rear seat adjuster assembly | 21 | 214 | 15 | |
REAR SEAT ASSEMBLY (FOR OTTOMAN) TORQUE SPECIFICATIONS
REAR SEAT ASSEMBLY (for Fixed Seat Type)
| Part Tightened | N*m | Kgf*cm | Ft.*lbf | |
|---|---|---|---|---|
| Rear seatback assembly x Vehicle body | For Bolt | 20 | 204 | 15 |
| For Nut | 20 | 204 | 204 | |
| Rear seat center armrest assembly x Rear seatback assembly | 20 | 204 | 204 | |
| Rear seat headrest assembly center x Rear seatback pad sub-assembly | 20 | 204 | 204 | |
REAR SEAT ASSEMBLY (FOR FIXED SEAT TYPE) TORQUE SPECIFICATIONS
SEAT VIBRATOR MODULE ASSEMBLY (for Ottoman)
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Seat vibrator module assembly x Body | 9.8 | 100 | 87 in.*lbf |
SEAT VIBRATOR MODULE ASSEMBLY (FOR OTTOMAN) TORQUE SPECIFICATIONS
AIR HOSE (for Ottoman)
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Air hose x Body | 9.8 | 100 | 87 in.*lbf |
AIR HOSE (FOR OTTOMAN) TORQUE SPECIFICATIONS
HOOD
| Part tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Hood x Hinge | 13 | 134 | 10 |
| Hood lock x Body | 8 | 82 | 71 in.*lbf |
HOOD TORQUE SPECIFICATIONS
HOOD SUPPORT ROD
| Part tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Hood support bracket LH x Body | 22.0 | 224 | 16 |
| Bracket hood stay LH x Hood | 22.0 | 224 | 16 |
HOOD SUPPORT ROD TORQUE SPECIFICATIONS
HOOD LOCK CONTROL CABLE ASSEMBLY
| Part tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Hood lock x Body | 8.0 | 82 | 71 in.*lbf |
HOOD LOCK CONTROL CABLE ASSEMBLY TORQUE SPECIFICATIONS
FRONT DOOR
| Part tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Body hinge x Body | 32.5 | 332 | 24 |
| Door hinge x Door panel | 32.5 | 332 | 24 |
| Striker mounting x Body | 23 | 235 | 17 |
| Door check x Door panel | 8.0 | 82 | 71 in.*lbf |
| Door check x Body | 27 | 275 | 20 |
| Front door outside handle frame sub-assembly LH x Body | 4.0 | 41 | 35 in.*lbf |
| Door lock x Door panel | 5.5 | 56 | 49 in.*lbf |
| Front door outside handle cover LH x Body | 4.0 | 41 | 35 in.*lbf |
| Front door frame sub-assembly front lower LH x Body | 8.0 | 82 | 71 in.*lbf |
| Front door frame sub-assembly rear lower LH x Body | 8.0 | 82 | 71 in.*lbf |
| Front power window regulator motor assembly LH x Front power window regulator assembly LH | 5.4 | 55 | 49 in.*lbf |
| Front power window regulator assembly LH x Door panel | 11 | 112 | 8 |
| Front power window regulator assembly LH x Door panel | 11 | 112 | 8 |
| Front door glass sub-assembly LH x Front power window regulator assembly | 5.4 | 55 | 49 in.*lbf |
| Front power window regulator motor assembly LH x Front power window regulator assembly LH | 5.5 | 56 | 49 in.*lbf |
FRONT DOOR TORQUE SPECIFICATIONS
REAR DOOR
| Part tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Body hinge x Body | 32.5 | 332 | 24 |
| Door hinge x Door panel | 32.5 | 332 | 24 |
| Striker mounting x Body | 23 | 235 | 17 |
| Door check x Door panel | 8.0 | 82 | 71 in.*lbf |
| Door check x Body | 27 | 275 | 20 |
| Rear door outside handle frame sub-assembly LH x Body | 4.0 | 41 | 35 in.*lbf |
| Door lock x Door panel | 5.5 | 56 | 49 in.*lbf |
| Rear power window regulator motor assembly LH x Rear power window regulator assembly LH | 5.4 | 55 | 49 in.*lbf |
| Rear power window regulator assembly LH x Door panel | 11 | 112 | 8 |
| Rear door glass sub-assembly LH x Rear power window regulator assembly | 5.5 | 56 | 49 in.*lbf |
REAR DOOR TORQUE SPECIFICATIONS
LUGGAGE COMPARTMENT DOOR
| Part tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Luggage door hinge x Luggage door panel | 8.0 | 82 | 71 in.*lbf |
| Luggage striker mounting x Body | 5.5 | 56 | 49 in.*lbf |
| Luggage door closer assembly x Luggage door panel | 5.5 | 56 | 49 in.*lbf |
LUGGAGE COMPARTMENT DOOR TORQUE SPECIFICATIONS
TRUNK LID ACTUATOR
| Part tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Luggage closer motor x Body | 5.5 | 56 | 49 in.*lbf |
TRUNK LID ACTUATOR TORQUE SPECIFICATIONS
FUEL LID OPENER MOTOR ASSEMBLY
| Part tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Fuel filler opening lid lock x Body | 5.5 | 56 | 49 in.*lbf |
| Fuel filler opening lid lock cable x Fuel filler opening lid | 8.0 | 82 | 71 in.*lbf |
FUEL LID OPENER MOTOR ASSEMBLY TORQUE SPECIFICATIONS
FRONT BUMPER
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Front bumper reinforcement X Body | 29 | 276 | 21 |
| Front suspension crossmember lower X Body | 25 | 255 | 18 |
| Radiator grille assembly x Body | 5.5 | 56 | 49 in.*lbf |
FRONT BUMPER TORQUE SPECIFICATIONS
REAR BUMPER
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Rear bumper reinforcement X Body | 20 | 204 | 15 |
REAR BUMPER TORQUE SPECIFICATIONS
RADIATOR GRILLE
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Radiator grille assembly x Body | 5.5 | 56 | 49 in.*lbf |
RADIATOR GRILLE TORQUE SPECIFICATIONS
SLIDING ROOF HOUSING
| Part Tightened | N*m | Kgf*cm | Ft.*lbf | |
|---|---|---|---|---|
| Sliding roof glass sub-assembly x Sliding roof housing | 5.5 | 56 | 49 in.*lbf | |
| Sliding roof housing x Body | For Bolt | 8.0 | 82 | 71 in.*lbf |
| For Nut | 5.5 | 56 | 49 in.*lbf | |
| Sliding roof drive gear x Sliding roof housing | 5.4 | 55 | 48 in.*lbf | |
SLIDING ROOF HOUSING TORQUE SPECIFICATIONS