Scheme 4
- INSPECT AND ADJUST DIFFERENTIAL OIL Stop the vehicle on a level place. Using a hexagon wrench (10 mm), remove the rear differential filler plug and gasket. Check that the oil surface is within 5 mm (0.20 in.) of the lowest position of the inner surface of the differential filler plug opening. NOTE: Excessively large or small amounts of oil may cause troubles. After replacing oil, drive the vehicle and check the oil level. Check for oil leakage when the oil level is low. Using a hexagon wrench (10 mm), install the rear differential filler plug with a new gasket. Torque: 49 N.m (500 kgf.cm, 36 ft.lbf)
- ADD DIFFERENTIAL OIL Using a hexagon wrench (10 mm), remove the rear differential filler plug and gasket. Add oil. Oil type: Differential synthetic gear oil GL-5 75W-90 or equivalent Capacity: 1.35 +/- 0.05 liters (1.43 +/- 0.05 US qts, 1.19 +/- 0.04 lmp. qts) Check the oil level. Using a hexagon wrench (10 mm), install the rear differential filler plug with a new gasket. Torque: 49 N.m (500 kgf.cm, 36 ft.lbf) NOTE: After replacing the oil, recheck the oil level after initial driving.