SERVICE DATA [04/2013 - ]
| Transfer chain case oil seal drive in depth | 5.6 to 6.2 mm (0.221 to 0.244 in.) |
|---|
| Transfer case oil seal drive in depth | 2.3 to 2.7 mm (0.091 to 0.106 in.) |
| Center differential carrier pinion gear thrust clearance | Standard: 0.2 to 0.5 mm (0.00788 to 0.0196 in.) |
| Transfer direct clutch return spring free length | Standard: 15.5 mm (0.610 in.) |
| Transfer direct clutch drum inside diameter | Standard: 65.00 to 65.06 mm (2.560 to 2.561 in.) |
| Transfer center support inside diameter | Standard: 49.9 to 50.1 mm (1.965 to 1.972 in.) |
| Transfer direct clutch drum assembly pack clearance | 0.40 to 0.80 mm (0.0158 to 0.0314 in.) |
| Center differential clutch disc flange No. 1 thickness | Mark | Thickness |
| 90 | 2.95 to 3.05 mm (0.117 to 0.120 in.) |
| 91 | 3.15 to 3.25 mm (0.125 to 0.127 in.) |
| 92 | 3.35 to 3.45 mm (0.132 to 0.135 in.) |
| Transfer case bearing drive in depth | 94.61 to 94.86 mm (3.725 to 3.734 in.) |
| Transfer control solenoid resistance: Terminal 1- Terminal 2 | 5.0 to 5.6 ohms |
