SPECIFIED TORQUE FOR STANDARD BOLTS
| Class | Diameter (mm) | Pitch (mm) | Specified torque | |||||
|---|---|---|---|---|---|---|---|---|
| Hexagon head bolt | Hexagon flange bolt | |||||||
| N*m | Kgf*cm | Ft.*lbf | N*m | Kgf*cm | Ft.*lbf | |||
| 4T | 6 | 1 | 5 | 55 | 48 in.*lbf | 6 | 60 | 52 in.*lbf |
| 8 | 1.25 | 12.5 | 130 | 9 | 14 | 145 | 10 | |
| 10 | 1.25 | 26 | 260 | 19 | 29 | 290 | 21 | |
| 12 | 1.25 | 47 | 480 | 35 | 53 | 540 | 39 | |
| 14 | 1.5 | 74 | 760 | 55 | 84 | 850 | 61 | |
| 16 | 1.5 | 115 | 1,150 | 83 | ||||
| 5T | 6 | 1 | 6.5 | 65 | 56 in.*lbf | 7.5 | 75 | 65 in.*lbf |
| 8 | 1.25 | 15.5 | 160 | 12 | 17.5 | 175 | 13 | |
| 10 | 1.25 | 32 | 330 | 24 | 36 | 360 | 26 | |
| 12 | 1.25 | 59 | 600 | 43 | 65 | 670 | 48 | |
| 14 | 1.5 | 91 | 930 | 67 | 100 | 1,050 | 76 | |
| 16 | 1.5 | 140 | 1,400 | 101 | ||||
| 6T | 6 | 1 | 8 | 80 | 69 in.*lbf | 9 | 90 | 78 in.*lbf |
| 8 | 1.25 | 19 | 195 | 14 | 21 | 210 | 15 | |
| 10 | 1.25 | 39 | 400 | 29 | 44 | 440 | 32 | |
| 12 | 1.25 | 71 | 730 | 53 | 80 | 810 | 59 | |
| 14 | 1.5 | 110 | 1,100 | 80 | 125 | 1,250 | 90 | |
| 16 | 1.5 | 170 | 1,750 | 127 | ||||
| 7T | 6 | 1 | 10.5 | 110 | 8 | 12 | 120 | 9 |
| 8 | 1.25 | 25 | 260 | 19 | 28 | 290 | 21 | |
| 10 | 1.25 | 52 | 530 | 38 | 58 | 590 | 43 | |
| 12 | 1.25 | 95 | 970 | 70 | 105 | 1,050 | 76 | |
| 14 | 1.5 | 145 | 1,500 | 108 | 165 | 1,700 | 123 | |
| 16 | 1.5 | 230 | 2,300 | 166 | ||||
| 8T | 8 | 1.25 | 29 | 300 | 22 | 33 | 330 | 24 |
| 10 | 1.25 | 61 | 620 | 45 | 68 | 690 | 50 | |
| 12 | 1.25 | 110 | 1,100 | 80 | 120 | 1,250 | 90 | |
| 9T | 8 | 1.25 | 34 | 340 | 25 | 37 | 380 | 27 |
| 10 | 1.25 | 70 | 710 | 51 | 78 | 790 | 57 | |
| 12 | 1.25 | 125 | 1,300 | 94 | 140 | 1,450 | 105 | |
| 10T | 8 | 1.25 | 38 | 390 | 28 | 42 | 430 | 31 |
| 10 | 1.25 | 78 | 800 | 58 | 88 | 890 | 64 | |
| 12 | 1.25 | 140 | 1,450 | 105 | 155 | 1,600 | 116 | |
| 11T | 8 | 1.25 | 42 | 430 | 31 | 47 | 480 | 35 |
| 10 | 1.25 | 87 | 890 | 64 | 97 | 990 | 72 | |
| 12 | 1.25 | 155 | 1,600 | 116 | 175 | 1,800 | 130 | |
SPECIFIED TORQUE FOR STANDARD BOLTS SPECIFICATION
TORQUE SPECIFICATIONS
| Part Tightened | N*m | Kgf*cm | Ft*lbf |
|---|---|---|---|
| Throttle body assembly x Intake air surge tank assembly | 10 | 102 | 7 |
| V-bank cover sub-assembly x Intake air surge tank sub-assembly | 5.0 | 51 | 44 in*lbf |
| V-bank cover sub-assembly x V-bank cover bracket | 5.0 | 51 | 44 in*lbf |
| Knock sensor x Cylinder block sub-assembly | 20 | 204 | 15 |
| Intake manifold x Cylinder head sub-assembly | 21 | 214 | 15 |
| ECM x Engine room ECU box | 5.5 | 56 | 49 in*lbf |
| Engine room ECU cover x Engine room ECU box | 5.5 | 56 | 49 in*lbf |
| Accelerator pedal rod assembly x Body | 5.0 | 51 | 44 in*lbf |
| Cylinder head cover sub-assembly x Camshaft timing oil control valve (OCV) | 10 | 102 | 7 |
4GR-FSE ENGINE CONTROL SYSTEM TORQUE SPECIFICATIONS
DRIVE BELT
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| No. 1 air cleaner inlet x Body | 5.0 | 51 | 44 in.*lbf |
DRIVE BELT TORQUE SPECIFICATIONS
ENGINE FRONT OIL SEAL
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Crankshaft pulley x Crankshaft | 250 | 2,550 | 184 |
ENGINE FRONT OIL SEAL TORQUE SPECIFICATIONS
ENGINE ASSEMBLY
| Part Tightened | N*m | Kgf*cm | Ft.*lbf | |
|---|---|---|---|---|
| Air cleaner case sub-assembly x Body | 5.0 | 51 | 44 in.*lbf | |
| Air cleaner inlet No. 1 x Body | 5.0 | 51 | 44 in.*lbf | |
| Cooler compressor assembly x Engine assembly | 25 | 255 | 18 | |
| Front exhaust pipe assembly x Exhaust manifold | 62 | 632 | 46 | |
| Exhaust pipe No. 1 support bracket sub-assembly x Exhaust manifold (A/T) | For Nut | 62 | 632 | 46 |
| For Bolt | 43 | 438 | 22 | |
| Front No. 1 floor heat insulator | 5.0 | 51 | 44 in.*lbf | |
| Front floor brace center x Body | 7.4 | 75 | 65 in.*lbf | |
| Rear No. 1 floor panel brace | 19 | 194 | 14 | |
| Front axle assembly x Suspension arm | 120 | 1,224 | 89 | |
| Front axle hub nut x Front drive shaft assembly (4WD) | 294 | 2,988 | 217 | |
| Tie rod assembly x Suspension arm (2WD) | 63 | 663 | 48 | |
| Drive plate x Engine assembly (A/T) | 83 | 846 | 61 | |
| Generator assembly x Engine assembly | 43 | 438 | 32 | |
| Generator assembly x Wire harness | 9.8 | 100 | 87 in.*lbf | |
| Generator bracket | 20 | 204 | 15 | |
| Starter assembly x Automatic transmission unit | 58 | 591 | 43 | |
| Crossmember subassembly x Body (2WD) | For Bolt | 204 | 2,080 | 150 |
| For Nut | 167 | 1,700 | 123 | |
| Front stabilizer bar x Body (2WD) | 49 | 500 | 36 | |
| Suspension member brace x Body | 50 | 510 | 37 | |
| Surge tank stay No. 2 | 21 | 214 | 15 | |
| Exhaust manifold sub-assembly x Engine assembly | 21 | 214 | 15 | |
| Ignition coil x Engine assembly | 10 | 102 | 7 | |
| Engine mount bracket x Engine assembly | 43 | 439 | 32 | |
| Engine mount bracket x Engine mounting insulator | 35 | 357 | 26 | |
| Injector driver x Engine assembly | 10 | 102 | 7 | |
| Water pump pulley x Engine assembly | 21 | 214 | 15 | |
| Oil level gauge guide x Engine assembly | 10 | 102 | 7 | |
| Oil level gauge guide No. 2 x Engine assembly | 21 | 214 | 15 | |
| Front drive shaft assembly RH x Engine assembly (4WD) | 32 | 327 | 27 | |
| Front differential assembly x Engine assembly (4WD) | 87 | 890 | 64 | |
| Battery positive cable x Battery | 13 | 133 | 10 | |
| Engine wire x Engine room No. 1 junction block | 12 | 124 | 9 | |
| Ground cable x Cylinder head cover | 13 | 133 | 10 | |
| Engine wire No. 3 x Body | 8.5 | 87 | 75 in.*lbf | |
| Front suspension member protector lower x Front suspension crossmember sub-assembly (2WD) | 8.0 | 82 | 71 in.*lbf | |
| Height control sensor link x Suspension link | 5.4 | 55 | 48 in.*lbf | |
| Front shock absorber assembly x Suspension lower arm (2WD) | 157 | 1,600 | 116 | |
| Front shock absorber assembly x Front absorber bracket lower (4WD) | 48 | 489 | 35 | |
| Power steering earth wire x Power steering link assembly | 5.0 | 51 | 44 in.*lbf | |
| Power steering link wire x Power steering wire bracket | 13 | 130 | 10 | |
| Engine rear mounting member x Body | 26 | 265 | 19 | |
| Front frame assembly x Body (4WD) | For bolt A | 167 | 1,700 | 123 |
| For bolt B | 165 | 1,680 | 122 | |
| Flywheel sub-assembly x Engine assembly (M/T) | 73 | 741 | 54 | |
| No. 2 idler pulley sub-assembly x Engine assembly | 43 | 439 | 32 | |
| V-ribbed belt tensioner assembly x Engine assembly | 43 | 439 | 32 | |
| Water hose joint x Engine assembly | 10 | 102 | 7 | |
| Radio setting condenser x Cylinder head cover | 10 | 102 | 7 | |
| V-bank cover bracket x Cylinder head cover | 10 | 102 | 7 | |
| Engine oil level sensor x Oil pan | 7.0 | 71 | 62 in.*lbf | |
| Oil pressure switch assembly x Engine assembly | 15 | 153 | 11 | |
| Engine coolant temperature sensor x Engine assembly | 20 | 204 | 15 | |
ENGINE ASSEMBLY TORQUE SPECIFICATIONS
ENGINE UNIT
| Part Tightened | N*m | Kgf*cm | Ft.*lbf | |
|---|---|---|---|---|
| Camshaft bearing cap x Camshaft housing | 1st | 10 | 102 | 7 |
| 2nd | 16 | 163 | 12 | |
| Camshaft housing x Cylinder head sub-assembly | 28 | 286 | 21 | |
| No. 1 chain tensioner x Cylinder head sub-assembly | 10 | 102 | 7 | |
| No. 2 chain tensioner x Cylinder head sub-assembly | 21 | 214 | 15 | |
| No. 3 chain tensioner x Cylinder head sub-assembly | 21 | 214 | 15 | |
| Camshaft timing gear assembly x Camshaft | 100 | 1,020 | 74 | |
| Engine rear oil seal retainer x Cylinder block sub-assembly | 10 | 102 | 7 | |
| Knock sensor x Cylinder block sub-assembly | 20 | 204 | 15 | |
| Water outlet pipe sub-assembly x Cylinder block sub-assembly | 10 | 102 | 7 | |
| No. 2 engine hanger x Cylinder head sub-assembly LH (4WD) | 33 | 337 | 24 | |
| Cylinder head x Cylinder block sub-assembly | 1st | 36 | 367 | 27 |
| 2nd | Turn 90° | Turn 90° | Turn 90° | |
| 3rd | Turn 90° | Turn 90° | Turn 90° | |
| Cylinder head sub-assembly x Cylinder block sub-assembly | Recessed head 1st | 36 | 367 | 27 |
| 2nd | Turn 90° | Turn 90° | Turn 90° | |
| 3rd | Turn 90° | Turn 90° | Turn 90° | |
| 14 mm (0.55 in.) head | 30 | 306 | 22 | |
| No. 1 chain vibration damper x Cylinder block sub-assembly | 23 | 230 | 17 | |
| No. 1 idle gear x Cylinder block sub-assembly | 60 | 612 | 44 | |
| Timing chain cover plate x Timing chain or belt cover sub-assembly | 9.1 | 93 | 81 in.*lbf | |
| Timing chain or belt cover sub-assembly | Bolt A | 43 | 438 | 32 |
| Except Bolt A | 21 | 214 | 15 | |
| Nut | 21 | 214 | 15 | |
| Water pump assembly x Timing chain or belt cover sub-assembly | Bolt A | 21 | 214 | 15 |
| Except Bolt A | 9.1 | 93 | 81 in.*lbf | |
| Oil pan baffle plate x Cylinder block sub-assembly | 10 | 102 | 102 | |
| Oil strainer stud bolt x Cylinder block and timing chain cover | 4.0 | 41 | 35 in.*lbf | |
| Oil pan stud bolt x Oil pan sub-assembly | 4.0 | 41 | 35 in.*lbf | |
| Oil strainer sub-assembly x Cylinder block and timing chain or belt cover | 10 | 102 | 102 | |
| Oil pan sub-assembly x Cylinder block and timing chain cover :bolt | Bolt A | 10 | 102 | 7 |
| Except Bolt A | 21 | 214 | 15 | |
| Oil pan sub-assembly x Cylinder block and timing chain cover :nut | 21 | 214 | 15 | |
| No. 2 oil pan sub-assembly x Oil pan sub-assembly | 10 | 102 | 7 | |
| Oil pan drain plug x No. 2 oil pan sub-assembly | 40 | 408 | 30 | |
| Crankshaft pulley x Crankshaft | 250 | 2,550 | 184 | |
| Cylinder head cover subassembly (Bank 1) x Cylinder head subassembly RH | Bolt A | 21 | 214 | 15 |
| Except Bolt A | 10 | 102 | 7 | |
| Cylinder head cover subassembly (Bank 2) x Cylinder head subassembly LH | Bolt A | 21 | 214 | 15 |
| Except Bolt A | 10 | 102 | 7 | |
| Rear water by-pass joint x Cylinder head sub-assembly | 10 | 102 | 7 | |
| With thermostat water inlet sub-assembly set nut | 10 | 102 | 7 | |
| Water inlet set bolt and nut | 10 | 102 | 7 | |
| Oil filter cap x Oil pan sub-assembly (2WD) | 25 | 255 | 18 | |
| Oil filter cap x Oil filter bracket sub-assembly (4WD) | 25 | 255 | 18 | |
| Oil filter cap x Oil filter drain plug (4WD) | 13 | 130 | 9 | |
| Oil pan sub-assembly x Oil filter bracket sub-assembly (4WD) | 21 | 214 | 15 | |
| Oil pan sub-assembly x Oil with strainer pipe subassembly (4WD) | 10 | 102 | 7 | |
| Camshaft position sensor | 10 | 102 | 7 | |
| Ventilation valve x Cylinder head cover sub-assembly LH | 27 | 275 | 20 | |
| Oil check valve bolt x Cylinder block sub-assembly | 60 | 612 | 44 | |
| Oil pipe union x Cylinder head cover sub-assembly | 60 | 612 | 44 | |
| Crankshaft position sensor x Cylinder block subassembly | 10 | 102 | 7 | |
| Camshaft timing oil control valve assembly x Cylinder head cover | 10 | 102 | 7 | |
| Cylinder block water drain cock sub-assembly | 30 | 306 | 22 | |
| Water drain cock plug x Water drain cock sub-assembly | 13 | 130 | 9 | |
| Spark plug x Cylinder head sub-assembly | 25 | 254 | 18 | |
| Stud bolt x Cylinder subassembly | For A and B bolts | 10 | 102 | 7 |
| For C bolts | 4.0 | 41 | 35 in.*lbf | |
| Union x Cylinder head sub-assembly | 15 | 153 | 11 | |
| With head screw plug x Cylinder head sub-assembly | 44 | 449 | 32 | |
| With head screw plug x Cylinder head sub-assembly | 80 | 816 | 59 | |
| Main bearing cap x Cylinder block subassembly | 16 point head 1st | 61 | 622 | 45 |
| 2nd | Turn 90° | Turn 90° | Turn 90° | |
| 12 mm head | 26 | 265 | 19 | |
| Connecting rod cap x Connecting rod | 1st | 25 | 250 | 28 |
| 2nd | Turn 90° | Turn 90° | Turn 90° | |
| Stud bolt x Cylinder block sub-assembly | 10 | 102 | 7 | |
| No. 1 sub-assembly oil nozzle x Cylinder block subassembly | 9.0 | 92 | 80 in.*lbf | |
ENGINE UNIT TORQUE SPECIFICATIONS
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| No. 1 fuel delivery pipe x Cylinder head | 21 | 214 | 15 |
| No. 2 fuel delivery pipe x Cylinder head | 21 | 214 | 15 |
| No. 3 fuel pipe x No. 1 fuel delivery pipe | 10 | 102 | 7 |
| No. 3 fuel pipe x No. 2 fuel delivery pipe | 10 | 102 | 7 |
| No. 2 fuel pipe x No. 1 fuel delivery pipe | 10 | 102 | 7 |
| No. 1 fuel pipe x Cylinder head cover | 10 | 102 | 7 |
| Fuel pressure pulsation damper x fuel pump (for high pressure) | 40 | 408 | 28 |
| Water hose joint x Camshaft housing sub-assembly RH | 10 | 102 | 7 |
| Intake manifold x Cylinder head | 21 | 214 | 15 |
| Intake air surge tank x Intake manifold : for nuts | 16 | 163 | 12 |
| Intake air surge tank x Intake manifold : for bolt A | 21 | 214 | 15 |
| Intake air surge tank x Intake manifold : for bolts except A | 18 | 184 | 13 |
| Surge tank stay x Intake air surge tank | 21 | 214 | 15 |
| Water hose joint x Intake air surge tank | 10 | 102 | 7 |
| No.1 vacuum switching valve assembly x Intake air surge tank | 18 | 184 | 13 |
| Cold start injector x Intake air surge tank | 10 | 102 | 7 |
| Cold start injector x Fuel tube | 15 | 153 | 11 |
| Fuel pressure pulsation damper x Fuel pump (for high pressure) | 40 | 408 | 30 |
| Fuel pressure sensor x No. 1 fuel delivery pipe : for use with SST | 24 | 240 | 18 |
| Fuel pressure sensor x No. 1 fuel delivery pipe : for use without SST | 31 | 316 | 23 |
| Injector driver x Engine assembly | 10 | 102 | 7 |
| Fuel pump (for high pressure) x Cylinder head cover RH | 25 | 255 | 18 |
| No.2 fuel pipe x Fuel pump (for high pressure) | 30 | 306 | 22 |
| Fuel pump resistor x Body | 5.0 | 51 | 44 in.*lbf |
| Fuel pump resistor x Ground wire | 8.0 | 80 | 69 in.*lbf |
| No.1 fuel tank breather tube sub-assembly x Fuel tank assembly | 1.5 | 15 | 13 in.*lbf |
| Fuel tank x Body | 39 | 400 | 29 |
| Rear suspension member brace RH x Body | 19 | 195 | 14 |
| Rear suspension member brace LH x Body | 19 | 195 | 14 |
| Parking brake cable assembly x Body : for bolt A | 6.0 | 61 | 53 in.*lbf |
| Parking brake cable assembly x Rear suspension member subassembly : for bolt B | 19 | 194 | 14 |
| Fuel sender gauge assembly x Fuel tank assembly | 1.5 | 15 | 13 in.*lbf |
4GR-FSE FUEL TORQUE SPECIFICATIONS
| Part Tightened | N*m | Kgf*cm | Ft.*lbf | |
|---|---|---|---|---|
| Charcoal canister assembly x Body | 5.5 | 56 | 49 in*lbf | |
| Ventilation valve sub-assembly x Cylinder head cover | 27 | 275 | 20 | |
| Battery tray x Body | 5.0 | 51 | 44 in*lbf | |
| Fuel ratio sensor x Exhaust manifold | (with SST) | 40 | 408 | 30 |
| Heated oxygen sensor x Exhaust pipe assembly front | (with SST) | 40 | 408 | 30 |
4GR-FSE EMISSION CONTROL TORQUE SPECIFICATIONS
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Front exhaust pipe assembly x Exhaust manifold | 62 | 632 | 46 |
| Exhaust pipe No. 1 support bracket sub-assembly x Transmission | 44 | 450 | 32 |
| Front exhaust pipe assembly x Tail exhaust pipe assembly | 43 | 438 | 32 |
| Heated oxygen sensor x Front exhaust pipe assembly | 44 | 449 | 32 |
| Front center floor brace x Body | 7.4 | 75 | 65 in*lbf |
| Tail exhaust pipe assembly x Exhaust pipe damper | 19 | 194 | 14 |
| Rear No. 1 floor panel brace x Body | 19 | 194 | 14 |
4GR-FSE EXHAUST TORQUE SPECIFICATIONS
| Part Tightened | N*m | Kgf*cm | Ft.*lbf | |
|---|---|---|---|---|
| Cylinder block drain cock plug x Cylinder block drain cock | 13 | 130 | 9 | |
| V bank cover sub-assembly x Cylinder head cover | 5.0 | 51 | 44 in.*lbf | |
| No. 1 inlet air cleaner x Upper radiator support subassembly | 5.0 | 51 | 44 in.*lbf | |
| V-bank cover sub-assembly x Bracket | 5.0 | 51 | 44 in.*lbf | |
| Water pump assembly x Chain cover | For Bolt A | 21 | 214 | 15 |
| For Bolts B and C | 9.1 | 93 | 81 in.*lbf | |
| No. 2 idler pulley sub-assembly x Chain cover subassembly | 43 | 438 | 32 | |
| V-ribbed belt tensioner pulley x Cylinder block | 43 | 438 | 32 | |
| Water inlet with thermostat sub-assembly x Water inlet | 10 | 102 | 7 | |
| Water pump pulley x Water pump assembly | 21 | 214 | 15 | |
| Water inlet with thermostat sub-assembly x Water inlet assembly | 10 | 102 | 7 | |
| Radiator assembly x Cooler condenser assembly | 5.0 | 51 | 44 in.*lbf | |
| Radiator support sub-assembly upper x Body | 8.0 | 82 | 71 in.*lbf | |
| Hood lock assembly x Radiator support sub-assembly | 8.0 | 82 | 71 in.*lbf | |
4GR-FSE COOLING TORQUE SPECIFICATIONS
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Oil pressure switch x Oil pan sub-assembly | 15 | 153 | 11 |
| Oil filter cap x Oil pan sub-assembly | 25 | 255 | 18 |
| Oil filter drain plug x Oil filter cap: for 4WD | 13 | 133 | 10 |
| Timing chain cover x Wiring harness bracket | 10 | 102 | 7 |
| Timing chain cover x Cylinder block: for bolt A | 43 | 438 | 32 |
| Timing chain cover x Cylinder block: for bolts except A | 21 | 214 | 15 |
4GR-FSE LUBRICATION TORQUE SPECIFICATIONS
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Spark plug x Cylinder head | 25 | 254 | 18 |
| Ignition coil x Cylinder head cover | 10 | 102 | 7 |
4GR-FSE IGNITION TORQUE SPECIFICATIONS
| Part Tightened | N*m | Kgf*cm | Ft*lbf | |
|---|---|---|---|---|
| Starter x Engine | Bolt | 58 | 591 | 43 |
| Terminal 30 | 9.8 | 100 | 87 in.*lbf | |
| Terminal C | 10 | 102 | 7 | |
| Exhaust manifold subassembly x Cylinder block | Nut | 21 | 214 | 15 |
| Engine room R/B No.3 x Body | Bolt, Nut | 12.5 | 127 | 9 |
| Engine wire bracket x Cylinder head | Bolt | 10 | 102 | 7 |
| Ground cable x Cylinder head | Bolt | 10 | 102 | 7 |
| Ground cable x Body | Bolt | 13 | 133 | 10 |
| Starter commutator end frame x Starter yoke assembly | Bolt | 6.0 | 61 | 53 in.*lbf |
| Magnetic switch x Starter drive housing | Screw | 7.5 | 76 | 66 in.*lbf |
4GR-FSE STARTING TORQUE SPECIFICATIONS
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Retainer plate x Generator drive end frame | 2.3 | 23 | 20 in.*lbf |
| Generator coil assembly x Generator drive end frame | 5.8 | 59 | 51 in.*lbf |
| Generator brush holder assembly x Generator coil assembly | 1.8 | 18 | 16 in.*lbf |
| Generator rear end cover x Generator coil assembly | 4.6 | 47 | 41 in.*lbf |
| Clutch pulley x Generator rotor assembly | 111 | 1,127 | 81 |
| Generator assembly x Generator bracket | 20 | 204 | 15 |
| Generator assembly x Cylinder block | 43 | 438 | 32 |
| Generator bracket x Cylinder block | 20 | 204 | 15 |
| Generator clamp bracket x Cylinder block | 10 | 102 | 7 |
| Generator wire x Terminal B | 9.8 | 100 | 87 in.*lbf |
| Wire harness x Cylinder head cover | 9.8 | 100 | 87 in.*lbf |
4GR-FSE CHARGING TORQUE SPECIFICATIONS
Automatic Transmission Assembly
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Refill plug x Transmission assembly | 39 | 400 | 53 |
| Overflow plug x Transmission assembly | 20 | 204 | 15 |
| Park/neutral position switch x Set bolt | 13 | 133 | 10 |
| Control shaft lever x Park/neutral position switch | 16 | 163 | 12 |
| Lock nut x Park/neutral position switch | 6.9 | 70 | 61 in*lbf |
| Engine rear mounting member x Body | 26 | 270 | 20 |
| Floor shift gear shifting rod x Shift lever assembly | 13 | 133 | 10 |
| Transmission revolution sensor x Transmission assembly | 5.4 | 55 | 48 in*lbf |
| Drain plug x Transmission assembly | 20 | 205 | 15 |
| Transmission control shaft lever LH x Park/neutral position switch | 16 | 163 | 12 |
| Engine mounting insulator rear No. 1 x Transmission assembly | 60 | 612 | 44 |
| Transmission assembly x Engine: Bolt A | 71 | 724 | 52 |
| Transmission assembly x Engine: Bolt B | 37 | 377 | 27 |
| Torque converter clutch x Drive plate | 41 | 418 | 30 |
| Wire harness x Transmission assembly | 10 | 102 | 7 |
| Engine rear mounting member x Engine mounting insulator rear No. 1 | 13 | 133 | 10 |
| Exhaust pipe No. 1 support bracket x Transmission assembly | 43 | 438 | 32 |
| Transmission wire x Transmission assembly | 5.4 | 55 | 48 in*lbf |
| Clamp x Transmission wire: Bolt A | 6.4 | 65 | 57 in*lbf |
| Clamp x Transmission wire: Bolt B | 10 | 102 | 7 |
| Clamp x Transmission valve body | 10 | 102 | 7 |
| ATF temperature sensor x Transmission valve body | 10 | 102 | 7 |
| Valve body oil strainer assembly x Transmission valve body | 10 | 102 | 7 |
| Automatic transmission oil pan x Transmission assembly | 4.4 | 45 | 39 in*lbf |
| Solenoid valve (SL1, SLT) x Valve body | 6.4 | 65 | 56 in*lbf |
| Solenoid valve (SR) x Valve body | 10 | 102 | 7 |
| Solenoid valve (S1) x Valve body | 10 | 102 | 7 |
| Solenoid valve (S2, S4) x Valve body | 10 | 102 | 7 |
| Solenoid valve (S3) x Valve body | 10 | 102 | 7 |
| Solenoid valve (SLU, SL2) x Valve body | 6.4 | 65 | 56 in*lbf |
| Valve body x Transmission assembly | 11 | 110 | 8 |
| Floor shift assembly x Body | 8.3 | 85 | 74 in*lbf |
| Water by-pass hose x Clamp | 20 | 204 | 15 |
| Transmission oil cooler x Transmission assembly | 21 | 214 | 15 |
| Transfer dynamic damper x Transmission assembly | 52 | 530 | 38 |
AUTOMATIC TRANSMISSION ASSEMBLY TORQUE SPECIFICATIONS
Automatic Transmission Unit
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Transmission housing x Transmission case: Bolt length 14 mm | 34 | 345 | 25 |
| Transmission housing x Transmission case: Bolt length 17 mm | 57 | 381 | 42 |
| Automatic transaxle breather tube x Transmission case | 5.4 | 55 | 48 in*lbf |
| Park/neutral position switch assembly: Bolt | 13 | 133 | 10 |
| Park/neutral position switch assembly: Nut | 6.9 | 70 | 61 in*lbf |
| Transmission wire x Transmission case | 5.4 | 55 | 48 in*lbf |
| Transmission oil cooler x Transmission case | 21 | 214 | 16 |
| Transmission control shaft lever LH set nut | 16 | 163 | 12 |
| Transmission revolution sensor x Transmission case | 5.4 | 55 | 48 in*lbf |
| Oil pan x Transmission case | 4.4 | 45 | 39 in*lbf |
| Valve body oil strainer assembly x Transmission valve body assembly | 10 | 102 | 7 |
| Transmission valve body assembly x Transmission case | 11 | 110 | 8 |
| Parking lock pawl bracket x Transmission case | 7.4 | 75 | 65 in*lbf |
| Drain plug | 20 | 204 | 15 |
| Over flow plug | 20 | 204 | 15 |
| Oil pump x Transmission case | 21 | 214 | 15 |
| Oil pump body x Starter shaft assembly | 12 | 122 | 9 |
| Detent spring x Transmission valve body assembly | 11 | 110 | 8 |
| Lock plate x Transmission valve body assembly | 6.4 | 65 | 57 in*lbf |
| Shift solenoid valve SR x Transmission valve body assembly | 10 | 102 | 7 |
| Shift solenoid valve S1 x Transmission valve body assembly | 10 | 102 | 7 |
| Shift solenoid valve S3 x Transmission valve body assembly | 10 | 102 | 7 |
| Shift solenoid valve S4 x Transmission valve body assembly | 10 | 102 | 7 |
| Shift solenoid valve SLT x Transmission valve body assembly | 6.4 | 65 | 57 in*lbf |
| Shift solenoid valve SL2 x Transmission valve body assembly | 6.4 | 65 | 57 in*lbf |
| ATF Temperature sensor x Transmission valve body assembly | 10 | 102 | 7 |
| Transmission wire x Transmission valve body assembly: Bolt A 6.4 | 65 | 57 | In*lbf |
| Transmission wire x Transmission valve body assembly: Bolt B | 10 | 102 | 7 |
AUTOMATIC TRANSMISSION UNIT TORQUE SPECIFICATIONS
Automatic Transmission Assembly
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Refill plug x Transmission assembly | 39 | 400 | 53 |
| Overflow plug x Transmission assembly | 20 | 204 | 15 |
| Transmission case cover x Transmission assembly | 5.4 | 55 | 48 in*lbf |
| Park/neutral position switch x Set bolt | 13 | 133 | 9 |
| Control shaft lever x Park/neutral position switch | 16 | 160 | 12 |
| Lock nut x Park/neutral position switch | 6.9 | 70 | 61 in*lbf |
| Engine rear mounting member x Body | 26 | 270 | 20 |
| Floor shift gear shifting rod x Shift lever assembly | 13 | 130 | 9 |
| Transmission revolution sensor x Transmission assembly | 5.4 | 55 | 48 in*lbf |
| Drain plug x Transmission assembly | 20 | 205 | 15 |
| Transmission control shaft lever RH x Park/neutral position switch | 16 | 163 | 12 |
| Engine mounting insulator rear No. 1 x Transmission assembly | 12 | 122 | 9 |
| Transmission assembly x Engine: Bolt A | 71 | 724 | 52 |
| Transmission assembly x Engine: Bolt B | 37 | 380 | 27 |
| Torque converter clutch x Drive plate | 41 | 418 | 30 |
| Wire harness x Transmission assembly | 10 | 102 | 7 |
| Engine rear mounting member x Engine mounting insulator rear No. 1 | 13 | 133 | 10 |
| Exhaust pipe No. 1 support bracket x Transmission assembly | 43 | 438 | 32 |
| Transmission wire x Transmission assembly | 5.4 | 55 | 48 in*lbf |
| Clamp x Transmission valve body: Bolt A | 6.4 | 65 | 57 in*lbf |
| Clamp x Transmission valve body: Bolt B | 10 | 102 | 7 |
| ATF temperature sensor x Transmission valve body | 10 | 102 | 7 |
| Valve body oil strainer assembly x Transmission valve body | 10 | 102 | 7 |
| Automatic transmission oil pan x Transmission assembly | 4.4 | 44 | 39 in*lbf |
| Solenoid valve (SL1, SLT) x Valve body | 6.4 | 65 | 56 in*lbf |
| Solenoid valve (SR) x Valve body | 10 | 102 | 7 |
| Solenoid valve (S1) x Valve body | 10 | 102 | 7 |
| Solenoid valve (S2, S4) x Valve body | 10 | 102 | 7 |
| Solenoid valve (S3) x Valve body | 10 | 102 | 7 |
| Solenoid valve (SLU, SL2) x Valve body | 6.4 | 65 | 56 in*lbf |
| Valve body x Transmission assembly | 11 | 112 | 8 |
| Floor shift assembly x Body | 8.3 | 85 | 74 in*lbf |
| Clamp x Water by-pass hose | 20 | 204 | 15 |
| Transmission oil cooler x Transmission assembly | 21 | 214 | 15 |
AUTOMATIC TRANSMISSION ASSEMBLY TORQUE SPECIFICATIONS
Automatic Transmission Unit
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Transmission housing x Transmission case: Bolt length 14 mm | 34 | 345 | 25 |
| Transmission housing x Transmission case: Bolt length 17 mm | 57 | 381 | 42 |
| Automatic transaxle breather tube x Transmission case | 5.4 | 55 | 48 in*lbf |
| Park/neutral position switch assembly: Bolt | 13 | 130 | 9 |
| Park/neutral position switch assembly: Nut | 6.9 | 70 | 61 in*lbf |
| Transmission wire x Transmission case | 5.4 | 55 | 48 in*lbf |
| Transmission oil cooler x Transmission case | 21 | 214 | 16 |
| Transmission control shaft lever RH set nut | 16 | 163 | 12 |
| Transmission revolution sensor x Transmission case | 5.4 | 55 | 48 in*lbf |
| Extension housing assembly x Transmission case | 34 | 345 | 25 |
| Oil pan x Transmission case | 4.4 | 45 | 39 in*lbf |
| Valve body oil strainer assembly x Transmission valve body assembly | 10 | 102 | 7 |
| Transmission valve body assembly x Transmission case | 11 | 110 | 8 |
| Parking lock pawl bracket x Transmission case | 7.3 | 74 | 65 in*lbf |
| Drain plug | 20 | 204 | 15 |
| Over flow plug | 20 | 204 | 15 |
| Oil pump x Transmission case | 21 | 214 | 15 |
| Oil pump body x Starter shaft assembly | 11 | 110 | 8 |
| Detent spring x Transmission valve body assembly | 10 | 102 | 7 |
| Lock plate x Transmission valve body assembly | 6.4 | 65 | 57 in*lbf |
| Shift solenoid valve SR x Transmission valve body assembly | 10 | 102 | 7 |
| Shift solenoid valve S1 x Transmission valve body assembly | 10 | 102 | 7 |
| Shift solenoid valve S3 x Transmission valve body assembly | 10 | 102 | 7 |
| Shift solenoid valve S4 x Transmission valve body assembly | 10 | 102 | 7 |
| Shift solenoid valve SLT x Transmission valve body assembly | 6.4 | 65 | 57 in*lbf |
| Shift solenoid valve SL2 x Transmission valve body assembly | 6.4 | 65 | 57 in*lbf |
| ATF Temperature sensor x Transmission valve body assembly | 10 | 102 | 7 |
| Transmission wire x Transmission valve body assembly: Bolt A | 6.4 | 65 | 57 in*lbf |
| Transmission wire x Transmission valve body assembly: Bolt B | 10 | 102 | 7 |
AUTOMATIC TRANSMISSION UNIT TORQUE SPECIFICATIONS
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Clutch pedal sub-assembly x Clutch pedal support | 37 | 375 | 27 |
| Clutch pedal support set bolt x Body | 24 | 242 | 17 |
| Clutch pedal support set nut x Body | 20 | 202 | 15 |
| Clutch line x Clutch master cylinder assembly | 15 | 153 | 11 |
| Clutch master cylinder assembly x Clutch pedal support | 12 | 120 | 9 |
| Pedal height adjust lock nut | 16 | 160 | 12 |
| Release cylinder bleeder plug | 11 | 112 | 8 |
| Clutch line x Clutch release cylinder assembly | 15 | 153 | 11 |
| Clutch release cylinder assembly x Clutch housing | 12 | 120 | 9 |
| Clutch tube x Clutch accumulator assembly | 23 | 235 | 17 |
| Clutch tube x Clutch line | 15 | 153 | 11 |
| Clutch accumulator assembly set bolt | 12 | 120 | 9 |
| Clutch cover assembly x Flywheel sub-assembly | 19 | 195 | 14 |
| Release fork support x Transmission assembly | 26 | 265 | 19 |
| Clutch start switch assembly x Clutch pedal support | 16 | 160 | 12 |
CLUTCH TORQUE SPECIFICATIONS
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Transmission filler plug x Manual transmission | 37 | 377 | 27 |
| Manual transmission upper cover x Manual transmission | 12 | 120 | 9 |
| Manual transmission x No. 1 engine mounting insulator rear | 25 | 255 | 18 |
| Manual transmission x Engine for bolt A | 72 | 730 | 53 |
| Manual transmission x Engine for bolt B | 37 | 380 | 28 |
| Engine rear mounting member set nut | 13 | 130 | 10 |
| Engine rear mounting member set bolt | 26 | 265 | 19 |
| Floor shift control shift lever retainer sub-assembly x Body | 20 | 204 | 15 |
| Clutch cover assembly x Flywheel sub-assembly | 19 | 195 | 14 |
| Clutch housing cover x Manual transmission | 18 | 184 | 13 |
| Clutch release cylinder assembly x Manual transmission | 12 | 120 | 9 |
| Clutch accumulator assembly x Manual transmission | 12 | 120 | 9 |
| Clutch accumulator assembly x Body | 5.4 | 55 | 48 in.*lbf |
| Engine under cover air guide bracket x Body | 26 | 260 | 19 |
| Shift lever cap set bolt | 10 | 102 | 7 |
| Gear shift fork No. 2 x Gear shift fork shaft No. 2 | 20 | 200 | 14 |
| Gear shift fork No. 3 x Gear shift fork shaft No. 3 | 20 | 200 | 14 |
| Transmission front case x Plug | 39 | 400 | 29 |
| Transmission front case x Interlock bracket | 21 | 214 | 15 |
| Shift and select lever x Shift and select lever shaft | 33 | 340 | 25 |
| Transmission middle case x Drain plug | 37 | 377 | 27 |
| Transmission front case x Transmission middle case | 40 | 408 | 30 |
| Reverse idler gear shaft bolt x Reverse idler gear shaft | 28 | 286 | 21 |
| Transmission oil separator x Transmission middle case | 8.5 | 87 | 75 in.*lbf |
| Bearing lock plate x Transmission rear case | 11 | 115 | 8.3 |
| Transmission rear case x Filler plug | 37 | 377 | 27 |
| Transmission rear case x Transmission middle case | 40 | 408 | 30 |
| Transmission rear case x Shift detent ball plug | 25 | 250 | 18 |
| Transmission rear case x Transmission extension housing | 29 | 296 | 21 |
| Transmission middle case x Back up light switch | 44 | 450 | 33 |
| Transmission middle case x Wire harness clamp | 13 | 130 | 9 |
RA62 MANUAL TRANSMISSION TORQUE SPECIFICATIONS
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Transfer upper valve body x Transfer valve body cover | 6.4 | 65 | 57 in.*lbf |
| Solenoid lock plate x Transfer upper valve body | 6.4 | 65 | 57 in.*lbf |
| Transfer center support x transfer chain case rear | 26 | 260 | 19 |
| Transfer chain case rear x Screws | 7.4 | 75 | 65 in.*lbf |
| Transfer chain case front x Screws | 7.4 | 75 | 65 in.*lbf |
| Transfer baffle valve x Transfer chain case rear | 9.8 | 100 | 87 in.*lbf |
| Transfer case x Clamp | 5.4 | 55 | 48 in.*lbf |
| Transfer chain case front x Automatic transmission assembly | 34 | 345 | 25 |
| Bolt (A): Transfer chain case rear x Transfer chain case front | 57 | 580 | 42 |
| Except bolt (A): Transfer chain case rear x Transfer chain case front | 34 | 345 | 25 |
| Flange yoke x Transfer drive sprocket | 123 | 1,250 | 91 |
| Transfer case x Transfer chain case rear | 34 | 345 | 25 |
| Transfer wire x Transfer case | 5.4 | 55 | 48 in.*lbf |
| Transfer valve body x Transfer case | 9.8 | 100 | 87 in.*lbf |
| Transfer oil pan x Transfer case | 7.4 | 75 | 65 in.*lbf |
| Transfer dynamic damper x Transfer case | 52 | 530 | 38 |
| Bolt: Engine rear mounting member x body | 26 | 265 | 19 |
| Nut: Engine rear mounting member x body | 38 | 387 | 28 |
| Bolt: 4WD control ECU x body | 14 | 137 | 10 |
| Nut: 4WD control ECU x body | 6.0 | 61 | 54 in.*lbf |
UF1AE TRANSFER TORQUE SPECIFICATIONS
2GR-FSE
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Intermediate shaft assembly x Adjusting nut | 69 | 700 | 51 |
| Intermediate shaft assembly x Adjusting nut: Using SST | 51 | 520 | 38 |
| Front floor heart insulator No.1 x | Body | 5.4 | 55 48in.*lbf |
| Outside air guide plate RH x | Body | 5.4 | 55 48in.*lbf |
| Propeller shaft assembly x Front flange | 79 | 805 | 58 |
| Propeller shaft assembly x Rear Differential companion flange | 79 | 805 | 58 |
| Center support bearing assembly No.1 x Body | 49 | 500 | 36 |
PROPELLER SHAFT TORQUE SPECIFICATIONS (2GR-FSE)
4GR-FSE
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Front propeller shaft x Transfer companion flange | 25 | 255 | 18 |
| Front propeller shaft x Differential companion flange | 25 | 255 | 18 |
| Intermediate shaft x Center support bearing assembly No.1: 1st | 182 | 1,850 | 134 |
| Intermediate shaft x Center support bearing assembly No.1: Loosen nut | |||
| Intermediate shaft x Center support bearing assembly No.1: 2nd | 69 | 700 | 51 |
| Propeller shaft assembly x Intermediate shaft assembly | 74 | 750 | 54 |
| Front floor heat insulator No.1 x | Body | 5.4 | 55 48 in.*lbf |
| Outside air guide plate RH x | Body | 5.4 | 55 48 in.*lbf |
| Propeller shaft assembly x Rear Differential companion flange | 74 | 750 | 54 |
| Center support bearing assembly x Body | 49 | 500 | 36 |
PROPELLER SHAFT TORQUE SPECIFICATIONS (4GR-FSE)
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Front wheel set nut | 103 | 1,050 | 76 |
| Front drive shaft x Front axle hub nut | 294 | 2,998 | 217 |
| Front drive shaft center bearing set bolt | 32 | 330 | 24 |
| Rear wheel set nut | 103 | 1,050 | 76 |
| Rear speed sensor x Rear axle carrier sub-assembly | 8.5 | 87 | 75 in.*lbf |
| Rear speed sensor wire x Toe control link sub-assembly | 6.0 | 61 | 53 in.*lbf |
| Rear drive shaft x Rear axle shaft nut | 290 | 2,957 | 214 |
| Rear axle carrier sub-assembly x Rear disc brake caliper | 54 | 551 | 40 |
| No.2 differential support protector x Rear suspension member | Brace | 5.4 | 55 48 in.*lbf |
| No.3 Parking brake cable assembly x Body | 19 | 194 | 14 |
DRIVE SHAFT TORQUE SPECIFICATIONS
FRONT DIFFERENTIAL CARRIER ASSEMBLY (for 4WD)
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Drain plug x Differential carrier | 39 | 400 | 29 |
| Filler plug x Differential carrier | 39 | 400 | 29 |
| Breather plug x Differential carrier | 21 | 210 | 15 |
| Side bearing retainer deflector x Differential carrier | 7.0 | 71 | 62 in.*lbf |
| Side bearing retainer x Differential carrier | 58 | 590 | 43 |
| Differential case x Differential ring gear | 97 | 985 | 71 |
| Companion flange front x Differential drive pinion | 108 to 235 | 1,100 to 2,400 | 80 to 173 |
| Front differential carrier assembly x Engine assembly | 87 | 890 | 64 |
FRONT DIFFERENTIAL CARRIER ASSEMBLY (FOR 4WD) TORQUE SPECIFICATIONS
REAR DIFFERENTIAL CARRIER ASSEMBLY (for 2GR-FSE)
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Drain plug x Differential carrier | 49 | 500 | 36 |
| Filler plug x Differential carrier | 49 | 500 | 36 |
| Differential carrier cover x Differential carrier | 47 | 475 | 35 |
| Differential carrier cover breather plug x Differential carrier cover | 21 | 210 | 15 |
| Breather plug oil deflector x Differential carrier cover | 7.0 | 70 | 62 in.*lbf |
| Differential case x Differential ring gear | 64 | 650 | 47 |
| Rear companion flange x Differential drive pinion | 490 or less | 5,000 or less | 361 or less |
| Front side: Differential carrier assembly x Rear suspension member | 95 | 970 | 70 |
| Rear side: Differential carrier assembly x Rear suspension member | 142 | 1,450 | 105 |
| Rear suspension member x Rear suspension member brace | 50 | 510 | 37 |
| Bolt (A): No. 3 Parking brake cable assembly x Body | 6.0 | 61 | 53 in.*lbf |
| Bolt (B): No. 3 Parking brake cable assembly x Body | 19 | 195 | 14 |
REAR DIFFERENTIAL CARRIER ASSEMBLY (for 2GR-FSE) TORQUE SPECIFICATIONS
REAR DIFFERENTIAL CARRIER ASSEMBLY (for 4GR-FSE)
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Drain plug x Differential carrier | 49 | 500 | 36 |
| Filler plug x Differential carrier | 49 | 500 | 36 |
| Differential carrier cover x Differential carrier | 47 | 480 | 35 |
| Differential breather plug x Differential carrier cover | 21 | 210 | 15 |
| Breather plug oil deflector x Differential carrier cover | 8.0 | 82 | 71 in.*lbf |
| Bearing cap x Differential carrier | 85 | 870 | 63 |
| Differential case x Differential ring gear | 97 | 985 | 72 |
| 2WD: Companion flange rear x Differential drive pinion | 338 or less | 3,450 or less | 249 or less |
| 4WD: Companion flange rear x Differential drive pinion | 223 or less | 2,280 or less | 164 or less |
| Front side: Differential carrier assembly x Rear suspension member | 95 | 970 | 70 |
| Rear side: Differential carrier assembly x Rear suspension member | 142 | 1,450 | 105 |
| Rear suspension member x Rear suspension member brace | 50 | 510 | 37 |
| Bolt (A): No. 3 Parking brake cable assembly x Body | 6.0 | 61 | 53 in.*lbf |
| Bolt (B): No. 3 Parking brake cable assembly x Body | 19 | 195 | 14 |
REAR DIFFERENTIAL CARRIER ASSEMBLY (FOR 4GR-FSE) TORQUE SPECIFICATIONS
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Front wheel set bolt | 103 | 1,050 | 76 |
| Steering knuckle x Lower ball joint assembly | 120 | 1,224 | 89 |
| Steering knuckle x Tie rod assembly | 65 | 663 | 48 |
| Steering knuckle x Upper suspension arm | 87 | 887 | 64 |
| Steering knuckle x Front axle hub sub-assembly | 69 | 702 | 51 |
| Steering knuckle x Front disc brake caliper assembly | 78 | 795 | 58 |
| Steering knuckle x Speed sensor front: Bolt (A) | 14 | 140 | 10 |
| Steering knuckle x Speed sensor front: Bolt (B) | 8.5 | 87 | 75 in.*lbf |
| Front drive shaft x Front axle hub nut | 294 | 2,998 | 217 |
| Rear wheel set nut | 103 | 1,050 | 76 |
| Rear drive shaft x Rear axle shaft nut | 290 | 2,957 | 214 |
| Rear axle carrier sub-assembly x Toe control link sub-assembly | 70 | 714 | 52 |
| No.2 rear suspension arm assembly x Stabilizer link assembly | 27 | 275 | 20 |
| Rear axle carrier sub-assembly x Rear axle hub & bearing assembly | 70 | 714 | 52 |
| Rear axle carrier sub-assembly x No.1 rear upper control arm assembly | 161 | 1,642 | 119 |
| Rear axle carrier sub-assembly x No.2 rear upper control arm assembly | 70 | 714 | 52 |
| Rear axle carrier sub-assembly x No.1 rear suspension arm assembly | 95 | 969 | 70 |
| Rear axle carrier sub-assembly x No.2 rear suspension arm assembly | 161 | 1,642 | 119 |
| Rear axle carrier sub-assembly x Parking brake cable assembly | 8.0 | 82 | 71 in.*lbf |
| Rear axle carrier sub-assembly x Parking brake anchor block sub-assembly | 76 | 775 | 56 |
AXLE TORQUE SPECIFICATIONS
| Part tighten | N*m | Kgf*cm | Ft*ibf |
|---|---|---|---|
| FRONT | |||
| Hub nut | 103 | 1,050 | 76 |
| Steering knuckle x Upper suspension arm | 87 | 887 | 64 |
| Lower ball joint x Steering knuckle | 162 | 1,650 | 120 |
| ABS Speed sensor wire harness x Shock absorber | 6.0 | 61 | 53 in.*ibf |
| Stabilizer ball x Stabilizer bar link | 84 | 857 | 62 |
| Shock absorber bracket x Shock absorber | 48 | 490 | 35 |
| Piston rod x Suspension support No.2 | 28 | 286 | 21 |
| Suspension support x Body | 67 | 683 | 49 |
| Upper suspension arm x Body | 49 | 500 | 36 |
| Stabilizer bar link x lower suspension arm | 84 | 857 | 62 |
| Height control link x Shock absorber bracket | 5.4 | 55 | 48 in.*ibf |
| Lower arm bracket x No.1 lower suspension arm | 113 | 1,150 | 83 |
| Tie rod end x Lower ball joint | 65 | 663 | 48 |
| Stabilizer No.1 bar bracket x Body | 49 | 500 | 36 |
| Tie rod end lock nut | 56 | 570 | 41 |
| Stabilizer No.2 bar bracket x Body | 49 | 500 | 36 |
| REAR | |||
| Hub nut | 103 | 1,050 | 76 |
| Axle carrier x Upper No.1 suspension arm | 161 | 1,640 | 119 |
| No.2 lower suspension arm x Axle carrier | 161 | 1,640 | 119 |
| No.1 lower suspension arm x Axle carrier | 95 | 970 | 70 |
| Suspension support x Body Upper side | 74 | 755 | 55 |
| Suspension support x Body Lower side | 21 | 214 | 16 |
| Piston rod x Suspension support | 18 | 184 | 13 |
| Upper suspension arm x Body | 74 | 755 | 55 |
| No.1 lower suspension arm x Body | 161 | 1,640 | 119 |
| No.2 lower suspension arm x Stabilizer bar link x Height control sensor link | 27 | 275 | 20 |
| No.2 lower suspension arm x Shock absorber | 110 | 1,120 | 81 |
| No.2 lower suspension arm x Body | 140 | 1,430 | 103 |
| Toe control link x Axle carrier | 70 | 714 | 52 |
| Toe control link x Body | 50 | 510 | 37 |
| Stabilizer bar x Stabilizer bar link | 89 | 908 | 66 |
| Stabilizer bar bracket x Body | 32 | 326 | 24 |
SUSPENSION TORQUE SPECIFICATIONS
| Part Tightened | N*m | Kgf*cm 2 | Ft*lbf |
|---|---|---|---|
| Tire pressure warning antenna set bolt | 7.5 | 77 | 66 in.*lbf |
| Tire pressure warning valve and transmitter | 4.0 | 41 | 35 in.*lbf |
| Tire pressure warning ECU and receiver | 4.5 | 46 | 40 in.*lbf |
TIRE AND WHEEL TORQUE SPECIFICATIONS
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Brake actuator assembly x Brake actuator bracket assembly | 5.4 | 55 | 48 in.*lbf |
| Brake actuator bracket assembly x Body | 19 | 195 | 14 |
| Brake actuator assembly x Brake tube | 15 | 155 | 11 |
| No. 3 engine room relay block x Body | 12.5 | 127 | 9 |
| Rear speed sensor | 8.5 | 87 | 75 in.*lbf |
| Yaw rate and acceleration sensor | 15 | 153 | 11 |
| SKID control ECU (with VDIM) | 4.8 | 49 | 42 in.*lbf |
BRAKE CONTROL TORQUE SPECIFICATIONS
| Part Tightened | N*m | Kgf*cm | Ft.*lbf | |
|---|---|---|---|---|
| Bleeder plug | 11 | 110 | 8 | |
| Brake booster clevis lock nut | 26 | 265 | 19 | |
| Brake pedal sub-assembly set bolt | 21 | 214 | 16 | |
| Stop light lock nut | 17 | 170 | 12 | |
| Brake pedal support assembly x Body | 12.7 | 130 | 9 | |
| Brake master cylinder x Brake booster | 12.5 | 127 | 9 | |
| Brake line union nut | 15 | 155 | 11 | |
| Wheel nut | 103 | 1,050 | 76 | |
| Front disc brake cylinder mounting x Steering knuckle | 4GR-FSE | 78 | 799 | 58 |
| Disc brake cylinder assembly x Steering knuckle | 2GR-FSE | 78.4 | 800 | 58 |
| Front disc brake cylinder assembly x Front disc brake cylinder mounting | 4GR-FSE | 34 | 350 | 25 |
| Front disc brake cylinder assembly x Flexible hose | 4GR-FSE | 30 | 310 | 22 |
| 2GR-FSE | 39 | 400 | 29 | |
| Rear disc brake cylinder mounting set bolt | 54 | 551 | 40 | |
| No. 1 rear disc brake cylinder support pin x Rear disc brake cylinder slide bushing | 25 | 250 | 18 | |
| Rear disc brake cylinder assembly x Flexible hose | 30 | 310 | 22 | |
| No. 3 engine room relay block x Body | 12.5 | 127 | 9 | |
| Brake actuator assembly x Bracket | 5.5 | 55 | 48 in.*lbf | |
BRAKE TORQUE SPECIFICATIONS
| Part Tightened | N*m | Kgf*cm | Ft.*lbf | |
|---|---|---|---|---|
| Wheel nut | 103 | 1,050 | 76 | |
| No. 1 parking brake lock nut | 6.0 | 61 | 53 in.*lbf | |
| Parking brake lever set bolt | 39 | 400 | 29 | |
| Parking brake pedal set nut | 13 | 133 | 10 | |
| Front floor rear upper sub panel sub-assembly x Body | 18 | 184 | 13 | |
| No. 1 parking brake cable assembly x Body | Nut | 6.0 | 61 | 53 in.*lbf |
| Bolt | 8.0 | 82 | 71 in.*lbf | |
| No. 2 parking brake cable assembly x Body | Bolt A | 6.0 | 61 | 53 in.*lbf |
| Bolt B | 19 | 194 | 14 | |
| No. 2 parking brake cable assembly x Parking brake support bracket | 8.0 | 82 | 71 in.*lbf | |
| Parking brake support bracket x Parking brake anchor block assembly | 76 | 775 | 56 | |
| Rear disc caliper assembly set bolt | 54 | 551 | 40 | |
PARKING BRAKE TORQUE SPECIFICATIONS
| Part tightened | N*m | Kgf*cm | Ft*lbf |
|---|---|---|---|
| Steering wheel set nut | 50 | 510 | 37 |
| Steering column assembly set nuts | 21 | 214 | 16 |
| No. 2 steering intermediate shaft assembly x Steering column assembly | 35 | 360 | 26 |
| No. 2 steering intermediate shaft assembly x Steering sliding yoke sub-assembly | 35 | 360 | 26 |
| Steering sliding yoke subassembly x Power steering link assembly | 35 | 360 | 26 |
| Tilt steering support set bolt | 15 | 153 | 11 |
| No. 2 tilt lever lock bolt | 5.4 | 55 | 48 in.*lbf |
| No. 1 tilt lever lock bolt | 2.0 | 20 | 18 in.*lbf |
| Tilt steering adjusting nut | 3.0 | 31 | 27 in.*lbf |
| Multiplex tilt and telescopic ECU set bolt | 1.5 | 15 | 13 in.*lbf |
STEERING COLUMN TORQUE SPECIFICATIONS
| Part tightened | N*m | Kgf*cm | Ft*lbf |
|---|---|---|---|
| Steering wheel set nut | 50 | 510 | 37 |
| Steering rack end x Steering rack | 76 (103) | 775 (1,050) | 56 (76) |
| Power steering link assembly set bolts (for 2WD) | 118 | 1,200 | 87 |
| Power steering link assembly set bolts (for 4WD) | 102 | 1,038 | 75 |
| Power steering earth wire x Power steering link assembly | 5.0 | 51 | 44 in.lbf |
| Earth wire x Bracket | 8.0 | 82 | 71 in.lbf |
| Tie rod end x Steering knuckle | 65 | 663 | 48 |
| Steering rack end sub-assembly x Tie rod end | 56 | 570 | 41 |
| Steering intermediate shaft assembly No.2 x Power steering link assembly | 35 | 360 | 26 |
| Negative battery cable x Battery | 5.6 | 57 | 50 in.lbf |
| Positive battery cable x Battery | 5.6 | 57 | 50 in.lbf |
| Battery clamp set nuts | 2.9 | 30 | 26 in.lbf |
| Power steering ECU assembly set bolts | 5.0 | 51 | 44 in.lbf |
| ( ): For use without SST | |||
POWER STEERING TORQUE SPECIFICATIONS
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| AIR CONDITIONING UNIT | |||
| Air conditioning radiator assembly x Blower assembly | 3.0 | 31 | 27 in.*lbf |
| Air conditioning unit assembly x Body | 9.8 | 100 | 7 |
| Instrument panel reinforcement assembly x Body (Collar) | 6.0 | 61 | 53 in.*lbf |
| Instrument panel reinforcement assembly x Body ("Torx" bolt) | 20 | 204 | 15 |
| Air conditioning tube assembly x Cooler expansion valve | 3.5 | 35 | 30 in.*lbf |
| Suction pipe sub-assembly x Air conditioning tube assembly | 9.8 | 100 | 7 |
| BLOWER UNIT | |||
| Air conditioning radiator assembly x Blower assembly | 3.0 | 31 | 27 in.*lbf |
| Blower assembly x Instrument panel reinforcement assembly (Bolt:) | 9.8 | 100 | 7 |
| No. 2 Air duct x Blower assembly | 5.4 | 55 | 48 in.*lbf |
| COMPRESSOR AND MAGNETIC CLUTCH | |||
| Compressor and magnetic clutch x Engine | 25 | 255 | 18 |
| Discharge hose sub-assembly x Compressor and magnetic clutch | 9.8 | 100 | 7 |
| No. 1 cooler refrigerant suction hose x Compressor and magnetic clutch | 9.8 | 100 | 7 |
| Magnet clutch hub x Cooler compressor assembly | 18 | 184 | 13 |
| Oil filter bracket sub-assembly | 21 | 214 | 15 |
| Compressor and magnetic clutch (stud bolt) x Engine | 10 | 102 | 7 |
| CONDENSER | |||
| Cooler condenser assembly x Radiator assembly | 5.0 | 51 | 44 in.*lbf |
| Discharge hose sub-assembly x Cooler condenser assembly | 5.4 | 55 | 47 in.*lbf |
| Liquid tube sub-assembly x Cooler condenser assembly | 5.4 | 55 | 47 in.*lbf |
| Cap x cooler condenser assembly | 2.9 | 30 | 26 in.*lbf |
| SMOG VENTILATION SENSOR | |||
| Smog ventilation sensor | 9.8 | 100 | 7 |
| HEATER GLOW PLUG | |||
| Water by-pass glow plug x Water hose joint | 15 | 157 | 11 |
| Heater blower wire x Water bypass glow plug | 2.7 | 28 | 24 in.*lbf |
| WATER HOSE JOINT | |||
| Water hose joint x Intake air surge tank | 10 | 102 | 7 |
AIR CONDITIONING TORQUE SPECIFICATIONS
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Steering pad x Steering wheel assembly | 8.8 | 90 | 78 in.*lbf |
| Driver side knee airbag assembly x Instrument panel reinforcement | 10 | 102 | 7 |
| Front passenger side knee airbag assembly x Instrument panel reinforcement | 10 | 102 | 7 |
| Curtain shield airbag assembly x Body | 11 | 110 | 8 |
| Center airbag sensor x Body | 17.5 | 179 | 13 |
| Front airbag sensor x Body | 9.0 | 92 | 80 in.*lbf |
| Side airbag sensor x Body | 9.0 | 92 | 80 in.*lbf |
| Rear airbag sensor x Body | 9.0 | 92 | 80 in.*lbf |
| Seat position sensor x Front seat assembly | 8.0 | 82 | 71 in.*lbf |
SUPPLEMENTAL RESTRAINT SYSTEM TORQUE SPECIFICATIONS
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Front seat x Body | 37 | 377 | 27 |
| Front seat inner belt assembly x Front seat | 42 | 428 | 31 |
| Front seat outer belt assembly (For upper bolt) x Body | 7.5 | 77 | 66 in.*lbf |
| Front seat outer belt assembly (For lower bolt) x Body | 42 | 428 | 31 |
| Front seat outer belt assembly (Shoulder anchor) x Front shoulder belt anchor adjuster assembly | 42 | 428 | 31 |
| Front seat outer belt assembly (Floor side) x Body | 42 | 428 | 31 |
| Rear seat x Body | 18 | 184 | 13 |
| Rear seat inner with center belt assembly RH x Body | 42 | 428 | 31 |
| Rear seat inner with center belt assembly LH x Body | 42 | 428 | 31 |
| Rear seat inner with center belt assembly RH (Floor side) x Body | 42 | 428 | 31 |
| Rear seat outer belt assembly (Floor side) x Body | 42 | 428 | 31 |
| Rear seat 3 point type belt assembly (For front bolt) x Body | 7.5 | 77 | 66 in.*lbf |
| Rear seat 3 point type belt assembly (For rear bolt) x Body | 42 | 428 | 31 |
| Child restraint seat tether anchor bracket x Body | 21 | 214 | 16 |
| Child restraint seat anchor bracket sub-assembly x Body | 31 | 316 | 23 |
| Seat belt control ECU x Body | 5.5 | 56 | 49 in.*lbf |
| Seat belt control ECU x clearance warning ECU | 5.5 | 56 | 49 in.*lbf |
SEAT BELT TORQUE SPECIFICATIONS
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Cruise control main switch x Steering wheel | 1.7 to 3.0 | 17 to 31 | 15 to 27 in.*lbf |
| Distance control ECU x Body | 5.5 | 56 | 49 in.*lbf |
| Millimeter wave radar sensor x Body | 5.5 | 56 | 49 in.*lbf |
| Clutch switch x Clutch Pedal | 15.7 | 160 | 12 ft.*lbf |
| Cowl side junction block x Instrument panel reinforcement | 8.0 | 82 | 71 in.*lbf |
CRUISE CONTROL TORQUE SPECIFICATIONS
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| HIGH INTENSITY DISCHARGE HEADLIGHT BULB | |||
| Washer hose x Body | 5.5 | 56 | 49 in.*lbf |
| GLOVE BOX LIGHT | |||
| Passenger side knee airbag assembly x Body | 10 | 102 | 7 |
| HEADLIGHT DIMMER SWITCH | |||
| Steering wheel assembly x Steering column assembly | 50 | 510 | 37 |
| Steering pad x Steering wheel assembly | 8.8 | 90 | 78 in.*lbf |
| DOOR MIRROR FOOT LIGHT | |||
| Outer rear view mirror assembly x Front door | 5.5 | 56 | 49 |
| STOP LIGHT SWITCH | |||
| Stop light switch assembly x Brake pedal support assembly | 17 | 170 | 12 |
| Driver side knee airbag assembly x Body | 10 | 102 | 7 |
| FRONT DOOR COURTESY SWITCH | |||
| Front door courtesy switch assembly x Body | 8.0 | 82 | 71 in.*lbf |
| REAR DOOR COURTESY SWITCH | |||
| Rear door courtesy switch assembly x Body | 8.0 | 82 | 71 in.*lbf |
| HEIGHT CONTROL SENSOR | |||
| Front height control sensor subassembly x Body (Bolt) | 14 | 143 | 10 |
| Front height control sensor subassembly x Body (Nut) | 5.4 | 55 | 48 in.*lbf |
| Rear height control sensor subassembly x Body (Bolt) | 14 | 143 | 10 |
| Rear height control sensor subassembly x Body (Nut) | 5.4 | 55 | 48 in.*lbf |
LIGHTING TORQUE SPECIFICATIONS
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| No. 3 cool air intake duct x Body | 5.5 | 56 | 49 in.*lbf |
| Wiper arm and blade x Wiper motor and link | 22 | 224 | 16 |
| Washer jar and pump x Body | 5.5 | 56 | 49 in.*lbf |
| Wiper motor x Wiper link | 7.5 | 77 | 66 in.*lbf |
| Wiper motor and link x Body | 5.5 | 56 | 49 in.*lbf |
WIPER AND WASHER TORQUE SPECIFICATIONS
FRONT DOOR LOCK
| Part Tightened | N*m | Kgf*cm | Ft*lbf |
|---|---|---|---|
| Front Door lock assembly x Door panel | 5.5 | 56 | 49 in.*lbf |
FRONT DOOR LOCK TORQUE SPECIFICATIONS
REAR DOOR LOCK
| Part Tightened | N*m | Kgf*cm | Ft*lbf |
|---|---|---|---|
| Rear Door lock assembly x Door panel | 5.5 | 56 | 49 in.*lbf |
REAR DOOR LOCK TORQUE SPECIFICATIONS
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Antenna cord assembly x body | 7.0 | 71 | 62 in.*lbf |
| Amplifier antenna assembly x body | 14 | 143 | 10 |
AUDIO/VISUAL TORQUE SPECIFICATIONS
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Low pitched horn x Body | 19 | 194 | 14 |
| High pitched horn x Body | 19 | 194 | 14 |
HORN TORQUE SPECIFICATIONS
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Front power window regulator motor x Front door window regulator subassembly | 5.4 | 55 | 48 in.*lbf |
| Rear power window regulator motor x Rear door window regulator subassembly | 5.4 | 55 | 48 in.*lbf |
WINDSHIELD/WINDOW GLASS TORQUE SPECIFICATIONS
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Inner rear view mirror x Windshield glass | 1.8 | 18 | 16 in.*lbf |
| Outer rear view mirror assembly x Door panel | 5.5 | 56 | 49 in.*lbf |
MIRROR TORQUE SPECIFICATIONS
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Instrument Panel Reinforcement x Passenger Airbag | 20 | 204 | 15 |
INSTRUMENT PANEL TORQUE SPECIFICATIONS
FRONT SEAT
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Airbag sensor x Front seat frame | 8 | 82 | 71 in.*lbf |
| Front seat inner belt x Front seat framer | 42 | 428 | 31 |
| Front seatback cover bracket x Front seat frame | 5.5 | 56 | 48 in.*lbf |
| Front seat outer belt anchor x Front seat frame | 42 | 428 | 31 |
| Front seat x Body | 37 | 377 | 27 |
FRONT SEAT TORQUE SPECIFICATIONS
REAR SEAT
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Rear seatback assembly x Body | 18 | 184 | 13 |
REAR SEAT TORQUE SPECIFICATIONS
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| HOOD | |||
| Hood hinge x Hood panel | 13 | 133 | 10 |
| Hood lock x Body | 8.0 | 82 | 71 in.*lbf |
| Hood stay bracket x Hood panel | 22 | 224 | 16 |
| Hood support bracket x Body | 22 | 224 | 16 |
| FRONT DOOR | |||
| Door check x Body | 27 | 275 | 20 |
| Door check x Door panel | 8.0 | 82 | 71 in.*lbf |
| Door hinge x Body | 26 | 265 | 19 |
| Door hinge x Door panel | 43 | 439 | 32 |
| Door lock x Door panel | 5.5 | 56 | 49 in.*lbf |
| Door lock striker x Body | 23 | 235 | 17 |
| Power window regulator motor x Window regulator | 5.4 | 55 | 48 in.*lbf |
| Window regulator x Door panel | 11 | 112 | 8.1 |
| Door glass x Window regulator | 5.5 | 56 | 49 in.*lbf |
| Outer rear view mirror x Door panel | 5.5 | 56 | 49 in.*lbf |
| REAR DOOR | |||
| Door check x Body | 27 | 275 | 20 |
| Door check x Door panel | 8.0 | 82 | 71 in.*lbf |
| Door hinge x Body | 26 | 265 | 19 |
| Door hinge x Door panel | 43 | 439 | 32 |
| Door lock x Door panel | 5.5 | 56 | 49 in.*lbf |
| Door lock striker x Body | 23 | 235 | 17 |
| Power window regulator motor x Window regulator | 5.4 | 55 | 48 in.*lbf |
| Window regulator x Door panel | 11 | 112 | 8.1 |
| LUGGAGE DOOR | |||
| Luggage door hinge x Door panel | 8.0 | 82 | 71 in.*lbf |
| Luggage lock striker x Body | 5.5 | 56 | 49 in.*lbf |
| Luggage lock x Door panel | 5.5 | 56 | 49 in.*lbf |
| Luggage lock cylinder x Door panel | 5.5 | 56 | 49 in.*lbf |
| Fuel lid motor x Body | 5.5 | 56 | 49 in.*lbf |
ENGINE HOOD/DOOR TORQUE SPECIFICATIONS
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| FRONT BUMPER | |||
| Front bumper reinforcement x Body | 70 | 714 | 52 |
| REAR BUMPER | |||
| Rear bumper reinforcement subassembly x Body | 20 | 204 | 15 |
EXTERIOR TORQUE SPECIFICATIONS
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Front seat outer belt assembly set bolt | 42 | 428 | 31 |
INTERIOR TORQUE SPECIFICATIONS
| Part Tightened | N*m | Kgf*cm | In.*lbf |
|---|---|---|---|
| Sliding roof piece sub-assembly set screw | 2.0 | 20 | 18 |
| Sliding roof side stopper x Sliding roof housing sub-assembly | 2.0 | 20 | 18 |
| Siding roof drive gear assembly x Sliding roof housing sub-assembly | 5.4 | 55 | 48 |
| Sliding roof housing sub-assembly set bolt Sliding roof housing sub-assembly set nut | 8.0 5.5 | 82 56 | 71 49 |
| Sliding roof glass sub-assembly set screw | 5.5 | 56 | 49 |
SLIDING ROOF TORQUE SPECIFICATIONS