SERVICE DATA
| Standard valve opening temperature | 80 to 84°C (176 to 183°F) |
|---|---|
| Standard valve lift | 10.0 mm (0.394 in.) or more at 95°C (203°F) |
WATER INLET WITH THERMOSTAT
| Standard current (Cooling fan motor) | Fan operates when A/C switch is turned ON (MAX COOL) | 2 to 22 A |
|---|---|---|
| Standard current (No. 2 cooling fan motor) | Fan operates when A/C switch is turned ON (MAX COOL) | 2 to 22 A |
| Standard current (Cooling fan motor) | Fan operates when engine coolant temperature sensor connector is disconnected | 2 to 22 A |
| Standard current (No. 2 cooling fan motor) | Fan operates when engine coolant temperature sensor connector is disconnected | 2 to 22 A |
| Standard current (Cooling fan motor) | Wile the motor is turning at 20°C (68°F) when battery voltage is 12 V | 18.0 to 22.0 A |
| Standard current (No. 2 cooling fan motor) | Wile the motor is turning at 20°C (68°F) when battery voltage is 12 V | 18.0 to 22.0 A |
COOLING FAN MOTOR
| 3 - 5 | 10 Mohms or higher |
|---|---|
| 3 - 5 | Below 1 ohms (when battery voltage is applied to terminals 1 and 2) |
COOLING FAN RELAY
| Standard valve (for brand-new cap) | 93 to 123 kPa (1.0 to 1.2 kgf/cm 2 , 13.5 to 17.8 psi) |
|---|---|
| Minimum standard valve (after using cap) | 79 kPa (0.8 kgf/cm 2 , 11.4 psi) |
RADIATOR CAP (STANDARD JUDGMENT CRITERION)
TORQUE SPECIFICATIONS
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Cylinder block drain cock plug x Cylinder block | 13 | 133 | 10 |
| Vent plug x Radiator assembly | 1.5 | 15 | 13 in.*lbf |
COOLANT
| Part Tightened | N*m | Kgf*cm | Ft.*lbf | |
|---|---|---|---|---|
| Water pump x Timing chain cover sub-assembly | Bolt A | 20 | 204 | 15 |
| Bolt B | 23 | 235 | 17 | |
| Bolt C | 47 | 479 | 35 | |
| Water pump pulley x Water pump | 21 | 214 | 15 | |
| Water inlet x Timing chain cover sub-assembly | 21 | 214 | 15 | |
WATER PUMP
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Water inlet with thermostat x Water inlet | 10 | 102 | 7 |
WATER INLET WITH THERMOSTAT
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| No. 2 cooling fan motor x Fan shroud | 3.9 | 40 | 35 in.*lbf |
| Cooling fan motor x Fan shroud | |||
| No. 2 fan x No. 2 cooling fan motor | 6.3 | 64 | 56 in.*lbf |
| Fan x Cooling fan motor |
COOLING FAN MOTOR
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Fan assembly x Radiator assembly | 5.0 | 51 | 44 in.*lbf |
| Radiator x Condenser | 5.0 | 51 | 44 in.*lbf |
| Oil cooler pipe x Radiator assembly | 5.5 | 56 | 49 in.*lbf |
| Radiator reservoir x Fan shroud | 5.0 | 51 | 44 in.*lbf |
| Upper radiator support x Body | 8.0 | 82 | 71 in.*lbf |
RADIATOR