SERVICE DATA [03/2012 - ]
| Item | Specified Condition |
|---|---|
| Valve opening temperature | 80 to 84°C (176 to 183°F) |
| Valve lift | 8.0 mm (0.315 in.) or more at 95°C (203°F) |
WATER INLET WITH THERMOSTAT
| Item | Condition | Specified Condition |
|---|---|---|
| Cooling fan motor | When the battery is connected to the fan motor connector | 4.5 to 10.5 A at 20°C (68°F) |
| No. 2 cooling fan motor | When the battery is connected to the No. 2 fan motor connector | 4.5 to 10.5 A at 20°C (68°F) |
COOLING FAN MOTOR
| Condition | Specified Condition |
|---|---|
| Standard valve (for brand-new cap) | 94 to 122 kPa (1.0 to 1.2 kgf/cm 2 , 13.6 to 17.7 psi) |
| Minimum standard valve (for used cap) | 79 kPa (0.8 kgf/cm 2 , 11.4 psi) |
RESERVOIR TANK CAP
| Item | Tester Connection | Specified Condition |
|---|---|---|
| Fan No. 1 relay | 3 - 5 | 10 kohms or higher (Battery voltage is not applied between terminals 1 and 2) |
| 3 - 5 | Below 1 ohms (Battery voltage is applied between terminals 1 and 2) |
COOLING FAN RELAY