SERVICE DATA
| Transfer case front oil seal drive in depth | 5.6 to 6.2 mm (0.220 to 0.244 in.) |
|---|---|
| Transfer case rear oil seal drive in depth | 2.3 to 2.7 mm (0.091 to 0.106 in.) |
| Center differential carrier pinion gear thrust clearance | Standard: 0.2 to 0.5 mm (0.008 to 0.020 in.) |
| Transfer direct clutch return spring free length | Standard: 15.2 to 15.8 mm (0.5984 to 0.6220 in.) |
| Transfer direct clutch drum inside diameter | Standard: 65.00 to 65.06 mm (2.559 to 2.564 in.) |
| Transfer center support inside diameter | Standard: 49.9 to 50.1 mm (1.965 to 1.972 in.) |
| Transfer direct clutch drum assembly pack clearance | 0.40 to 0.80 mm (0.016 to 0.031 in.) |
| Center differential clutch disc flange No.1 thickness mm (in.) | 2.95 to 3.05 (0.116 to 0.120) 3.15 to 3.25 (0.124 to 0.128) 3.35 to 3.45 (0.132 to 0.136) |
| Transfer case bearing drive in depth | 94.6 to 94.9 mm (3.724 to 3.736 in.) |
| Transfer control solenoid resistance: Terminal 1- Terminal 2 | 5.0 to 5.5 ohms |