Home ReviewsRefund
Home/Lexus/CT/Lexus CT I (2010-2014)/Repair manual/Communication Devices/LIN Communication System (Diagnostics - Introduction): Other
Contents Wiring diagrams Section: Communication Devices All sections

LIN Communication System (Diagnostics - Introduction): Other Lexus CT I

Communication Devices 6 illustrations ~129 words

PRECAUTION

Note. When disconnecting the cable from the negative (-) auxiliary battery terminal, initialize the following systems after the cable is reconnected. System Name See Procedure Parking Assist Monitor System Refer to INITIALIZATION Power Door Lock Control System

  1. PRECAUTIONS WHEN USING TECHSTREAM When using the Techstream to troubleshoot with the power switch off: Connect the Techstream to the DLC3, and turn the courtesy light switch on and off at 1.5-second intervals until communication between the Techstream and vehicle begins. After all DTCs are cleared, check if the trouble occurs again 6 seconds after the power switch is turned on (IG).

Scheme 85

Scheme 85: ILLUSTRATION
Scheme 85: ILLUSTRATION

Scheme 86

Scheme 86: ILLUSTRATION
Scheme 86: ILLUSTRATION

Scheme 87

Scheme 87: ILLUSTRATION
Scheme 87: ILLUSTRATION

Scheme 88

Scheme 88: SYSTEM DIAGRAM
Scheme 88: SYSTEM DIAGRAM

Scheme 89

Scheme 89
Scheme 89

Scheme 90

Scheme 90
Scheme 90
  1. DOOR BUS LINES
  2. CERTIFICATION BUS LINES
  3. AIR CONDITIONING BUS LINES

More articles — LIN Communication System (Diagnostics - Introduction)