CAN Communication System (Diagnostic Codes & Symptom Tests): Other Lexus CT I

PROCEDURE

1. CHECK FOR OPEN IN ONE SIDE OF V1 BUS BRANCH LINE Based on the vehicle equipment and specifications, confirm the systems that use CAN communication. Refer to «DIAGNOSIS SYSTEM»(ref-568746-S10222482722013072300000) . Using the Techstream, select and perform "CAN Bus Check". Refer to «DIAGNOSIS SYSTEM»(ref-568746-S10222482722013072300000) . Observe the screen for approximately 1 minute to check the ECUs and sensors that are not displayed on the screen and also those that repeatedly appear and disappear from the screen. Check the applicable communication stop mode for the ECU or sensor that is not displayed on the screen. NEXT --> See step 2
2. GO TO CORRESPONDING COMMUNICATION STOP MODE. Refer to «PROBLEM SYMPTOMS TABLE»(ref-568746-S38662788722013072300000)