Home ReviewsRefund
Home/Land Rover/Range Rover/Land Rover Range Rover L322 (2002-2005)/Repair manual/Mechanical/Reassembly
Contents Wiring diagrams Section: Mechanical All sections

Reassembly Land Rover Range Rover L322

Mechanical ~114 words
  1. Fit new gaskets to inlet manifold.
  2. Position inlet manifold, connect drain hose and secure the hose with a new clip.
  3. Fit inlet manifold to studs, fit spacers and tighten nuts evenly and progressively to 15 Nm (11 ft. lbs).
  4. Connect purge control valve hose to inlet manifold.
  5. Connect engine breather hoses and tighten hose clips.
  6. Position engine breather separator to bracket and tighten bolts to 6 Nm (4.4 ft. lbs).
  7. Position Secondary Air Injection (SAI) vacuum switch and reservoir to inlet manifold, connect hose to inlet manifold end cover.
  8. Connect vacuum hose to SAI control valve.
  9. Fit positive terminal to bracket on inlet manifold and tighten nut to 10 Nm (7 ft. lbs).

More articles — 4.4L V8