Contents Wiring diagrams Section: Communication Devices All sections

Module Communications Network: Specifications Land Rover Range Rover III facelift

SPECIFICATIONS

DescriptionNm
Body ground cable to stud nut25
Hood ground cable nut6
Starter motor switch lead nut (Diesel only)4
Battery positive cable to starter motor nut (Diesel)22
Battery positive cable to starter motor nut (Petrol)10
Starter motor bolts45
Headlamp nuts6
Tire pressure module sensor valve4
Tire pressure module sensor bolt4
Audio amplifier bolts10
Transceiver screws6
Antenna nuts6
Voice recognition module nuts6
Traffic message channel tuner nuts10
Telephone control unit nuts4
Rear seat entertainment interface unit bracket bolts4
Satellite digital audio radio service (SDARS) tuner/receiver bolts (NAS only)4
Parking aid sounder nut10
Tailgate solenoid motor bolt25
Horn mounting bracket bolt10
Horn to mounting bracket nut10
Immobilization ECU bolt3
Alarm tilt sensor nuts3
Engine junction box (EJB) nuts8
EJB positive battery cable nut8
Central junction box (CJB) battery cable nut15
CJB cable nuts8

TORQUE SPECIFICATIONS