SPECIFICATIONS
| Item | Specification |
|---|---|
| Type | Cable operated from shift mechanism to bell crank on side of transmission with manual release from Park 'P' position in the event of electrical failure |
GENERAL SPECIFICATION
| Description | Nm |
|---|---|
| Selector lever locknut | 14 |
| Transmission heat shield bolts | 10 |
| Transmission under shield bolts | 10 |
| Transmission selector nuts* | 8 |
TORQUE SPECIFICATIONS
*Before VIN257100, discard old fixings and tighten new fixings to the torque value given
Scheme 82
| Item Number | Description |
|---|---|
| 1 | Selector cable |
| 2 | Shift interlock solenoid |
| 3 | Selector lever |
| 4 | Manual +/- CommandShift switch |
| 5 | Selector lever and shroud |
| 6 | Park/Reverse release button |
| 7 | Selector lever cover |
| 8 | High/Low range selector switch |
| 9 | Selector position light emitting diode (LED) display |
| 10 | Hill Descent Control (HDC) switch |
| 11 | Key interlock cable |
| 12 | Key interlock mechanism |
| 13 | Selector lever position switch |
| 14 | Manual/Sport switch |
| 15 | Mounting plate |