| A/C Compressor | 16 (22) |
| ACE Pump | 16 (22) |
| Auxiliary Drive Belt Tensioner | 33 (45) |
| Auxiliary Housing | 30 (40) |
| Block Coolant Drain Plug | 22 (30) |
| Camshaft Gear Bolt | 37 (50) |
| Camshaft Thrust Plate Bolts | 16 (22) |
| Connecting Rod Cap Bolts (2) |
| Step 1 | 15 (20) |
| Step 2 | Tighten An Additional 80 Degrees |
| Coolant Outlet Elbow | 16 (22) |
| Crankshaft Pulley Bolt | 200 (270) |
| Cylinder Head Bolt (2) (3) |
| Step 1 | 15 (20) |
| Step 2 | Tighten An Additional 90 Degrees |
| Step 3 | Tighten An Additional 90 Degrees |
| Drive Plate & Clamp Ring Bolt (Early Engine) | 33 (45) |
| Drive Plate Spacer & Hub-To-Crankshaft Bolt (Early Engine) | 63 (85) |
| Drive Plate-To-Crankshaft Allen Bolt (Later Engine) | 63 (85) |
| Engine Ground Strap | 16 (22) |
| Engine Mount Bolts | 63 (85) |
| Engine Mount Nuts | 33 (45) |
| Engine-To-Transmission Bolt | 63 (85) |
| Exhaust Manifold Bolt (4) |
| Initial Torque | 11 (15) |
| Final Torque | 28 (38) |
| Front Exhaust Pipe Flange Nuts | 22 (30) |
| Flywheel-To-Crankshaft Bolt | 58 (78) |
| Generator Mounting Bracket | 30 (40) |
| Intake Manifold (5) |
| Step 1 | (6) |
| Step 2 | 38 (51) |
| Intake Manifold Gasket Clamp Bolt | 13 (18) |
| Jockey (Idler Pulley) | 37 (50) |
| Knock Sensor | 16 (22) |
| Main Bearing Cap Bolts (7) |
| Initial Torque - All Main Bearing Cap & Side Bolts | 10 (14) |
| Final Torque |
| Main Bearing Cap Bolts 1-8 | 53 (72) |
| Main Bearing Cap Bolts 9-10 | 68 (92) |
| Main Bearing Cap Side Bolts 11-15 | 33 (45) |
| Main Bearing Cap Side Bolts 16-20 | 33 (45) |
| Oil Cooler Pipe-To-Timing Cover | 11 (15) |
| Oil Drain Plug | 24 (33) |
| Oil Pressure Switch | 11 (15) |
| Oxygen Sensor | 33 (45) |
| Plenum Chamber | 16 (22) |
| Rocker Shaft Bolt | 30 (40) |
| Secondary Air Injection Adapters | 24 (33) |
| Spark Plugs | 15 (20) |
| Sump (Oil Pan) Bolts & Nuts (8) | 16 (22) |
| Tail Pipe | 18 (25) |
| Timing Cover Bolt (9) (10) | 16 (22) |
| Torque Converter-To-Flexplate Bolt | 37 (50) |
| Viscous Fan Nut | 33 (45) |
| Water Pump Bolt | 18 (24) |
| Water Pump Pulley | 16 (22) |
| INCH Lbs. (N.m) |
| Breather Adapter | 53 (6) |
| Camshaft Position (CMP) Sensor Bolt | 71 (8) |
| Crankshaft Position (CKP) Sensor Bolt | 53 (6) |
| Crankshaft Position (CKP) Sensor Cover | 53 (6) |
| Engine Coolant Temperature Sensor (10) | 89 (10) |
| Fuel Rail | 80 (9) |
| IAVC Sensor | 71 (8) |
| Ignition Coils | 71 (8) |
| Oil Pick-Up Strainer Bolt | 89 (10) |
| Oil Pump Filter Head Adapter (10) | 115 (13) |
| Oil Pump Filter Head Bolt | 71 (8) |
| Rocker Cover Bolts (2) | 71 (8) |
| Throttle Body | 89 (10) |
| Throttle Cable Abutment Bracket | 89 (10) |
| Throttle Position Sensor | 18 (2) |
| (1) For torque specifications not specified, refer to STANDARD TORQUE SPECIFICATIONS table for bolt size torque specification. (2) Replace bolts after every use. (3) Tighten cylinder head bolts in sequence. (Схема №15) (4) Tighten exhaust manifold bolts in sequence. (Схема №25) (5) Tighten lower intake manifold bolts in sequence. (Схема №100) (6) 89 INCH Lbs. (10 N.m) (7) Tighten main bearing cap bolts in sequence. (Схема №175) (8) Tighten oil pan bolts in sequence. (Схема №75) (9) Tighten timing cover bolts in sequence. (Схема №89) (10) Apply sealant, Part Number STC 50552 to threads prior to assembly. |
