STARTER SPECIFICATIONS
| Application | Specifications | ||
|---|---|---|---|
| Armature | |||
| Commutator Runout | |||
| Standard | 002" (.05 mm) | ||
| Limit | .0039" (.1 mm) | ||
| Commutator Diameter | |||
| Standard | 1.157" (29.4 mm) | ||
| Limit | 1.118" (28.4mm) | ||
| Commutator Undercut (Mica) Depth | |||
| Standard | 0.02" (0.5 mm) | ||
| Limit | 0.08" (.2 mm) | ||
| Pinion Gap | 0.79" (.2 mm) | ||
| Segment Mold Depth | |||
| Standard | 0.02" (0.5 mm) | ||
| Limit | 0.08" (.2 mm) | ||
| INCH Lbs. (N.m) | |||
| Brush Length | |||
| Standard | 106-150 (12-17) | ||
| Limit | 62-106 (7-12) | ||
| (1) Information is not available from manufacturer. | |||
| (1) | Information is not available from manufacturer. |
STARTER SPECIFICATIONS
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) | |
|---|---|---|
| Exhaust Pipe (2) | ||
| "A" | 46-63 (40-42) | |
| "B" | 79-108 (69-94) | |
| "C" | 24-31 (21-27) | |
| Lower Starter Bolts | 43-60 (37-52) | |
| Intake Manifold Bracket Bolts | 43-60 (37-52) | |
| Starter Cable Nut | (1) | |
| INCH Lbs. (N.m) | ||
| Starter Connector Bolt | 89-106 (10-12) | |
| Starter Brush Plate Screws | 26-35 (3-4) | |
| Starter Rear Cover Bolts | 35-62 (4-7) | |
| Starter Solenoid Bolts | (1) | |
| Starter Solenoid Screws | 36-71 (4-8) | |
| Upper Starter Bolt | 89-106 (10-12) | |
| (1) Information is not available from manufacturer (2) (Схема №14) | ||
| (1) | Information is not available from manufacturer |
| (2) | (Схема №14) |
TORQUE SPECIFICATIONS