Home ReviewsRefund Car not listed?
Home/Kia/Soul/Kia Soul I рестайлинг (2011-2014)/Repair manual/Door Locks & Anti-Theft Systems/Smart Key Code Saving Diagnosis: Other
Contents Section: Door Locks & Anti-Theft Systems All sections

Smart Key Code Saving Diagnosis: Other Kia Soul I рестайлинг

Door Locks & Anti-Theft Systems 4 illustrations ~378 words

Verification of Vehicle Repair

After a repair, it is essential to verify that the fault has been corrected.

  1. Connect GDS and check "No. of Key learnt, ECM/PCM status and Smart key ECM/PCM status.
  2. Select "Diagnostic Trouble Codes(DTCs)" mode and then clear DTC.
  3. Operate the vehicle within the enable condition and monitor the DTC on the GDS.
  4. Are any DTCs present? YES Go to the applicable troubleshooting procedure. NO System is performing to specification at this time.

Scheme 280

Scheme 280: Component Location
Scheme 280: Component Location

After a repair, it is essential to verify that the fault has been corrected.

  1. Connect GDS and check "No. of Key learnt, ECM/PCM status and Smart key ECM/PCM status.
  2. Select "Diagnostic Trouble Codes(DTCs)" mode and then clear DTC.
  3. Operate the vehicle within the enable condition and monitor the DTC on the GDS.
  4. Are any DTCs present? YES Go to the applicable troubleshooting procedure. NO System is performing to specification at this time.

Scheme 281

Scheme 281: Component Location
Scheme 281: Component Location

After a repair, it is essential to verify that the fault has been corrected.

  1. Connect GDS and check "No. of Key learnt, ECM/PCM status and Smart key ECM/PCM status.
  2. Select "Diagnostic Trouble Codes(DTCs)" mode and then clear DTC.
  3. Operate the vehicle within the enable condition and monitor the DTC on the GDS.
  4. Are any DTCs present? YES Go to the applicable troubleshooting procedure. NO System is performing to specification at this time.

Scheme 282

Scheme 282: Component Location
Scheme 282: Component Location

After a repair, it is essential to verify that the fault has been corrected.

  1. Connect GDS and check "No. of Key learnt, ECM/PCM status and Smart key ECM/PCM status.
  2. Select "Diagnostic Trouble Codes(DTCs)" mode and then clear DTC.
  3. Operate the vehicle within the enable condition and monitor the DTC on the GDS.
  4. Are any DTCs present? YES Go to the applicable troubleshooting procedure. NO System is performing to specification at this time.

Scheme 283

Scheme 283: Component Location
Scheme 283: Component Location

After a repair, it is essential to verify that the fault has been corrected.

  1. Connect GDS and check "No. of Key learnt, ECM/PCM status and Smart key ECM/PCM status.
  2. Select "Diagnostic Trouble Codes(DTCs)" mode and then clear DTC.
  3. Operate the vehicle within the enable condition and monitor the DTC on the GDS.
  4. Are any DTCs present? YES Go to the applicable troubleshooting procedure. NO System is performing to specification at this time.

More articles — Smart Key Code Saving Diagnosis