Home ReviewsRefund
Home/Kia/Optima/Kia Optima II рестайлинг (2008-2010)/Repair manual/Anti-Lock/traction Control/Esc Troubleshooting: Other
Contents Section: Anti-Lock/traction Control All sections

Esc Troubleshooting: Other Kia Optima II рестайлинг

Anti-Lock/traction Control 32 illustrations ~2501 words

VERIFICATION OF VEHICLE REPAIR

After a repair, it is essential to verify that the fault has been corrected.

  1. Connect scan tool and select "Diagnostic Trouble Codes (DTCs)" mode
  2. Using a scan tool, Clear DTC.
  3. Operate the vehicle within DTC Detecting Condition in «GENERAL INFORMATION»(ref-359934-S09704132432010042200000) .
  4. Using a scan tool, Check DTC present.
  5. Are any DTCs present? YES Go to the applicable troubleshooting procedure. NO System performing to specification at this time.

Scheme 185

Scheme 185: Component Location
Scheme 185: Component Location

After a repair, it is essential to verify that the fault has been corrected.

  1. Connect scan tool and select "Diagnostic Trouble Codes (DTCs)" mode
  2. Using a scan tool, Clear DTC.
  3. Operate the vehicle within «DTC DETECTING CONDITION»(ref-359934-S22291757072010042200000) .
  4. Using a scan tool, Check DTC present.
  5. Are any DTCs present? YES Go to the applicable troubleshooting procedure. NO System performing to specification at this time.

Scheme 186

Scheme 186: Component Location
Scheme 186: Component Location

After a repair, it is essential to verify that the fault has been corrected.

  1. Connect scan tool and select "Diagnostic Trouble Codes (DTCs)" mode
  2. Using a scan tool, Clear DTC.
  3. Operate the vehicle within «DTC DETECTING CONDITION»(ref-359934-S34692832732010042200000) .
  4. Using a scan tool, Check DTC present.
  5. Are any DTCs present? YES Go to the applicable troubleshooting procedure. NO System performing to specification at this time.

Scheme 187

Scheme 187: Component Location
Scheme 187: Component Location

After a repair, it is essential to verify that the fault has been corrected.

  1. Connect scan tool and select "Diagnostic Trouble Codes (DTCs)" mode
  2. Using a scan tool, Clear DTC.
  3. Operate the vehicle within «DTC DETECTING CONDITION»(ref-359934-S17955868362010042200000) . Start and drive vehicle in gear and maintain vehicle speed at or above 10 kmh (6.2 mph).
  4. Using a scan tool, Check DTC present.
  5. Are any DTCs present? YES Go to the applicable troubleshooting procedure. NO System performing to specification at this time.

Scheme 188

Scheme 188: Component Location
Scheme 188: Component Location

After a repair, it is essential to verify that the fault has been corrected.

  1. Connect scan tool and select "Diagnostic Trouble Codes (DTCs)" mode
  2. Using a scan tool, Clear DTC.
  3. Operate the vehicle within «DTC DETECTING CONDITION»(ref-359934-S16657994792010042200000) . Start and drive vehicle in gear and maintain vehicle speed at or above 40 kmh (24 mph).
  4. Using a scan tool, Check DTC present.
  5. Are any DTCs present? YES Go to the applicable troubleshooting procedure. NO System performing to specification at this time.

Scheme 189

Scheme 189: Component Location
Scheme 189: Component Location

After a repair, it is essential to verify that the fault has been corrected.

  1. Connect scan tool and select "Diagnostic Trouble Codes (DTCs)" mode
  2. Using a scan tool, Clear DTC.
  3. Operate the vehicle within «DTC DETECTING CONDITION»(ref-359934-S10518821632010042200000) . Start and drive vehicle in gear and maintain vehicle speed at or above 10 kmh. (6.2 mph).
  4. Using a scan tool, Check DTC present.
  5. Are any DTCs present? YES Go to the applicable troubleshooting procedure. NO System performing to specification at this time.

Scheme 190

Scheme 190: Component Location
Scheme 190: Component Location

After a repair, it is essential to verify that the fault has been corrected.

  1. Connect scan tool and select "Diagnostic Trouble Codes (DTCs)" mode
  2. Using a scan tool, Clear DTC.
  3. Operate the vehicle within «DTC DETECTING CONDITION»(ref-359934-S13191985132010042200000) . Start and drive vehicle in gear and maintain vehicle speed at or above 10 kmh (6.2 mph).
  4. Using a scan tool, Check DTC present.
  5. Are any DTCs present? YES Go to the applicable troubleshooting procedure. NO System performing to specification at this time.

Scheme 191

Scheme 191: Component Location
Scheme 191: Component Location

After a repair, it is essential to verify that the fault has been corrected.

  1. Connect scan tool and select "Diagnostic Trouble Codes (DTCs)" mode
  2. Using a scan tool, Clear DTC.
  3. Operate the vehicle within «DTC DETECTING CONDITION»(ref-359934-S28740751842010042200000) . Start and drive vehicle in gear and maintain vehicle speed at or above 10 kmh (6.2 mph).
  4. Using a scan tool, Check DTC present.
  5. Are any DTCs present? YES Go to the applicable troubleshooting procedure. NO System performing to specification at this time.

Scheme 192

Scheme 192: Component Location
Scheme 192: Component Location

After a repair, it is essential to verify that the fault has been corrected.

  1. Connect scan tool and select "Diagnostic Trouble Codes (DTCs)" mode
  2. Using a scan tool, Clear DTC.
  3. Operate the vehicle within «DTC DETECTING CONDITION»(ref-359934-S41867703942010042200000) . Start and drive vehicle in gear and maintain vehicle speed at or above 40kmh. (24 mph).
  4. Using a scan tool, Check DTC present.
  5. Are any DTCs present? YES Go to the applicable troubleshooting procedure. NO System performing to specification at this time.

Scheme 193

Scheme 193: Component Location
Scheme 193: Component Location

After a repair, it is essential to verify that the fault has been corrected.

  1. Connect scan tool and select "Diagnostic Trouble Codes (DTCs)" mode
  2. Using a scan tool, Clear DTC.
  3. Operate the vehicle within «DTC DETECTING CONDITION»(ref-359934-S39004127282010042200000) . Start and drive vehicle in gear and maintain vehicle speed at or above 10kmh. (6.2 mph).
  4. Using a scan tool, Check DTC present.
  5. Are any DTCs present? YES Go to the applicable troubleshooting procedure. NO System performing to specification at this time.

Scheme 194

Scheme 194: Component Location
Scheme 194: Component Location

After a repair, it is essential to verify that the fault has been corrected.

  1. Connect scan tool and select "Diagnostic Trouble Codes (DTCs)" mode
  2. Using a scan tool, Clear DTC.
  3. Operate the vehicle within «DTC DETECTING CONDITION»(ref-359934-S04981383742010042200000) . Start and drive vehicle in gear and maintain vehicle speed at or above 10kmh. (6.2 mph).
  4. Using a scan tool, Check DTC present.
  5. Are any DTCs present? YES Go to the applicable troubleshooting procedure. NO System performing to specification at this time.

Scheme 195

Scheme 195: Component Location
Scheme 195: Component Location

After a repair, it is essential to verify that the fault has been corrected.

  1. Connect scan tool and select "Diagnostic Trouble Codes (DTCs)" mode
  2. Using a scan tool, Clear DTC.
  3. Operate the vehicle within «DTC DETECTING CONDITION»(ref-359934-S14336185482010042200000) . Start and drive vehicle in gear and maintain vehicle speed at or above 40 kmh. (24 mph).
  4. Using a scan tool, Check DTC present.
  5. Are any DTCs present? YES Go to the applicable troubleshooting procedure. NO System performing to specification at this time.

Scheme 196

Scheme 196: Component Location
Scheme 196: Component Location

After a repair, it is essential to verify that the fault has been corrected.

  1. Connect scan tool and select "Diagnostic Trouble Codes (DTCs)" mode.
  2. Using a scan tool, Clear DTC.
  3. Operate the vehicle within «DTC DETECTING CONDITION»(ref-359934-S00838212482010042200000) . Start and drive vehicle in gear and maintain vehicle speed at or above 10 kmh (6.2 mph).
  4. Using a scan tool, Check DTC present.
  5. Are any DTCs present? YES Go to the applicable troubleshooting procedure. NO System performing to specification at this time.

Scheme 197

Scheme 197: Component Location
Scheme 197: Component Location

After a repair, it is essential to verify that the fault has been corrected.

  1. Connect scan tool and select "Diagnostic Trouble Codes (DTCs)" mode
  2. Using a scan tool, Clear DTC.
  3. Operate the vehicle within «DTC DETECTING CONDITION»(ref-359934-S05243242942010042200000) . Start and drive vehicle in gear and maintain vehicle speed at or above 40 kmh (24 mph).
  4. Using a scan tool, Check DTC present.
  5. Are any DTCs present? YES Go to the applicable troubleshooting procedure. NO System performing to specification at this time.

Scheme 198

Scheme 198: Component Location
Scheme 198: Component Location

After a repair, it is essential to verify that the fault has been corrected.

  1. Connect scan tool and select "Diagnostic Trouble Codes (DTCs)" mode
  2. Using a scan tool, Clear DTC.
  3. Operate the vehicle within «DTC DETECTING CONDITION»(ref-359934-S02980126192010042200000) . Start and drive vehicle in gear and maintain vehicle speed at or above 10 kmh (6.2 mph).
  4. Using a scan tool, Check DTC present.
  5. Are any DTCs present? YES Go to the applicable troubleshooting procedure. NO System performing to specification at this time.

Scheme 199

Scheme 199: Component Location
Scheme 199: Component Location

After a repair, it is essential to verify that the fault has been corrected.

  1. Connect scan tool and select "Diagnostic Trouble Codes (DTCs)" mode
  2. Using a scan tool, Clear DTC.
  3. Operate the vehicle within «DTC DETECTING CONDITION»(ref-359934-S21904175872010042200000) .
  4. Using a scan tool, Check DTC present.
  5. Are any DTCs present? YES Go to the applicable troubleshooting procedure. NO System performing to specification at this time.

Scheme 200

Scheme 200: Component Location
Scheme 200: Component Location

After a repair, it is essential to verify that the fault has been corrected.

  1. Connect scan tool and select "Diagnostic Trouble Codes (DTCs)" mode
  2. Using a scan tool, Clear DTC.
  3. Operate the vehicle within «DTC DETECTING CONDITION»(ref-359934-S01000966132010042200000) .
  4. Using a scan tool, Check DTC present.
  5. Are any DTCs present? YES Go to the applicable troubleshooting procedure. NO System performing to specification at this time.

Scheme 201

Scheme 201: Component Location
Scheme 201: Component Location

After a repair, it is essential to verify that the fault has been corrected.

  1. Connect scan tool and select "Diagnostic Trouble Codes (DTCs)" mode
  2. Using a scan tool, Clear DTC.
  3. Operate the vehicle within «DTC DETECTING CONDITION»(ref-359934-S25275423002010042200000) .
  4. Using a scan tool, Check DTC present.
  5. Are any DTCs present? YES Go to the applicable troubleshooting procedure. NO System performing to specification at this time.

Scheme 202

Scheme 202: Component Location
Scheme 202: Component Location

After a repair, it is essential to verify that the fault has been corrected.

  1. Connect scan tool and select "Diagnostic Trouble Codes (DTCs)" mode
  2. Using a scan tool, Clear DTC.
  3. Operate the vehicle within «DTC DETECTING CONDITION»(ref-359934-S34707541802010042200000) .
  4. Using a scan tool, Check DTC present.
  5. Are any DTCs present? YES Go to the applicable troubleshooting procedure. NO System performing to specification at this time.

Scheme 203

Scheme 203: Component Location
Scheme 203: Component Location

After a repair, it is essential to verify that the fault has been corrected.

  1. Connect scan tool and select "Diagnostic Trouble Codes (DTCs)" mode
  2. Using a scan tool, Clear DTC.
  3. Operate the vehicle within «DTC DETECTING CONDITION»(ref-359934-S04099100202010042200000) .
  4. Using a scan tool, Check DTC present.
  5. Are any DTCs present? YES Go to the applicable troubleshooting procedure. NO System performing to specification at this time.

Scheme 204

Scheme 204: Component Location
Scheme 204: Component Location

After a repair, it is essential to verify that the fault has been corrected.

  1. Connect scan tool and select "Diagnostic Trouble Codes (DTCs)" mode
  2. Using a scan tool, Clear DTC.
  3. Operate the vehicle within «DTC DETECTING CONDITION»(ref-359934-S42900353072010042200000) . Start and drive vehicle in gear and maintain vehicle speed at or above 40 kmh. (24 mph).
  4. Using a scan tool, Check DTC present.
  5. Are any DTCs present? YES Go to the applicable troubleshooting procedure. NO System performing to specification at this time.

After a repair, it is essential to verify that the fault has been corrected.

  1. Connect scan tool and select "Diagnostic Trouble Codes (DTCs)" mode
  2. Using a scan tool, Clear DTC.
  3. Operate the vehicle within «DTC DETECTING CONDITION»(ref-359934-S16585985692010042200000) .
  4. Using a scan tool, Check DTC present.
  5. Are any DTCs present? YES Go to the applicable troubleshooting procedure. NO System performing to specification at this time.

Scheme 205

Scheme 205: Component Location
Scheme 205: Component Location

After a repair, it is essential to verify that the fault has been corrected.

  1. Connect scan tool and select "Diagnostic Trouble Codes (DTCs)" mode
  2. Using a scan tool, Clear DTC.
  3. Operate the vehicle within «DTC DETECTING CONDITION»(ref-359934-S18125469222010042200000) .
  4. Using a scan tool, Check DTC present.
  5. Are any DTCs present? YES Go to the applicable troubleshooting procedure. NO System performing to specification at this time.

Scheme 206

Scheme 206: Component Location
Scheme 206: Component Location

After a repair, it is essential to verify that the fault has been corrected.

  1. Connect scan tool and select "Diagnostic Trouble Codes (DTCs)" mode
  2. Using a scan tool, Clear DTC.
  3. Operate the vehicle within «DTC DETECTING CONDITION»(ref-359934-S22335234172010042200000) .
  4. Using a scan tool, Check DTC present.
  5. Are any DTCs present? YES Go to the applicable troubleshooting procedure. NO System performing to specification at this time.

Scheme 207

Scheme 207: Component Location
Scheme 207: Component Location

After a repair, it is essential to verify that the fault has been corrected.

  1. Connect scan tool and select "Diagnostic Trouble Codes (DTCs)" mode
  2. Using a scan tool, Clear DTC.
  3. Operate the vehicle within «DTC DETECTING CONDITION»(ref-359934-S05307004132010042200000) .
  4. Using a scan tool, Check DTC present.
  5. Are any DTCs present? YES Go to the applicable troubleshooting procedure. NO System performing to specification at this time.

Scheme 208

Scheme 208: Component Location
Scheme 208: Component Location

After a repair, it is essential to verify that the fault has been corrected.

  1. Connect scan tool and select "Diagnostic Trouble Codes (DTCs)" mode
  2. Using a scan tool, Clear DTC.
  3. Operate the vehicle within «DTC DETECTING CONDITION»(ref-359934-S20536817822010042200000) .
  4. Using a scan tool, Check DTC present.
  5. Are any DTCs present? YES Go to the applicable troubleshooting procedure. NO System performing to specification at this time.

Scheme 209

Scheme 209: Component Location
Scheme 209: Component Location

After a repair, it is essential to verify that the fault has been corrected.

  1. Connect scan tool and select "Diagnostic Trouble Codes (DTCs)" mode
  2. Using a scan tool, Clear DTC.
  3. Operate the vehicle within «DTC DETECTING CONDITION»(ref-359934-S20455196592010042200000) .
  4. Using a scan tool, Check DTC present.
  5. Are any DTCs present? YES Go to the applicable troubleshooting procedure. NO System performing to specification at this time.

Scheme 210

Scheme 210: Component Location
Scheme 210: Component Location

After a repair, it is essential to verify that the fault has been corrected.

  1. Connect scan tool and select "Diagnostic Trouble Codes (DTCs)" mode
  2. Using a scan tool, Clear DTC.
  3. Operate the vehicle within «DTC DETECTING CONDITION»(ref-359934-S22182887682010042200000) .
  4. Using a scan tool, Check DTC present.
  5. Are any DTCs present? YES Go to the applicable troubleshooting procedure. NO System performing to specification at this time.

Scheme 211

Scheme 211: Component Location
Scheme 211: Component Location

After a repair, it is essential to verify that the fault has been corrected.

  1. Connect scan tool and select "Diagnostic Trouble Codes (DTCs)" mode
  2. Using a scan tool, Clear DTC.
  3. Operate the vehicle within «DTC DETECTING CONDITION»(ref-359934-S33846966462010042200000) .
  4. Using a scan tool, Check DTC present.
  5. Are any DTCs present? YES Go to the applicable troubleshooting procedure. NO System performing to specification at this time.

Scheme 212

Scheme 212: Component Location
Scheme 212: Component Location

After a repair, it is essential to verify that the fault has been corrected.

  1. Connect scan tool and select "Diagnostic Trouble Codes (DTCs)" mode
  2. Using a scan tool, Clear DTC.
  3. Operate the vehicle within «DTC DETECTING CONDITION»(ref-359934-S25801433312010042200000) .
  4. Using a scan tool, Check DTC present.
  5. Are any DTCs present? YES Go to the applicable troubleshooting procedure. NO System performing to specification at this time.

Scheme 213

Scheme 213: Component Location
Scheme 213: Component Location

After a repair, it is essential to verify that the fault has been corrected.

  1. Connect scan tool and select "Diagnostic Trouble Codes (DTCs)" mode
  2. Using a scan tool, Clear DTC.
  3. Operate the vehicle within «DTC DETECTING CONDITION»(ref-359934-S25880659142010042200000) .
  4. Using a scan tool, Check DTC present.
  5. Are any DTCs present? YES Go to the applicable troubleshooting procedure. NO System performing to specification at this time.

Scheme 214

Scheme 214: Component Location
Scheme 214: Component Location

After a repair, it is essential to verify that the fault has been corrected.

  1. Connect scan tool and select "Diagnostic Trouble Codes (DTCs)" mode
  2. Using a scan tool, Clear DTC.
  3. Operate the vehicle within «DTC DETECTING CONDITION»(ref-359934-S32041684332010042200000) .
  4. Using a scan tool, Check DTC present.
  5. Are any DTCs present? YES Go to the applicable troubleshooting procedure. NO System performing to specification at this time.

Scheme 215

Scheme 215: Component Location
Scheme 215: Component Location

After a repair, it is essential to verify that the fault has been corrected.

  1. Connect scan tool and select "Diagnostic Trouble Codes (DTCs)" mode
  2. Using a scan tool, Clear DTC.
  3. Operate the vehicle within «DTC DETECTING CONDITION»(ref-359934-S27969674812010042200000) . Start and drive vehicle in gear and maintain vehicle speed at or above 40kmh. (24 mph).
  4. Using a scan tool, Check DTC present.
  5. Are any DTCs present? YES Go to the applicable troubleshooting procedure. NO System performing to specification at this time.

Scheme 216

Scheme 216: Component Location
Scheme 216: Component Location

After a repair, it is essential to verify that the fault has been corrected.

  1. Connect scan tool and select "Diagnostic Trouble Codes (DTCs)" mode
  2. Using a scan tool, Clear DTC.
  3. Operate the vehicle within «DTC DETECTING CONDITION»(ref-359934-S34199834932010042200000) . Start and drive vehicle in gear and maintain vehicle speed at or above 12 kmh (7.5 mph).
  4. Using a scan tool, Check DTC present.
  5. Are any DTCs present? YES Go to the applicable troubleshooting procedure. NO System performing to specification at this time.

More articles — Esc Troubleshooting