DESCRIPTION & OPERATION
A window switch, located at each door panel, controls voltage applied to its respective window motor. Driver-side master power window switch has 3 additional buttons for control of each passenger window.
With ignition on, battery voltage from P/WINDOW 30-amp fuse is applied to master power window switch. Driver can control power distributed to passenger window switches with a lock-out feature incorporated into master window switch. By toggling a window switch to desired position, power is supplied to appropriate window motor.
| WARNING | Deactivate air bag system before performing any service operation. See DISABLING & ACTIVATING AIR BAG SYSTEM article. DO NOT apply electrical power to any component on steering column without first deactivating air bag system. Air bag may deploy. |
Note. Anytime battery cables are disconnected from battery and then reconnected, theft deterrent system will operate (horn will sound and emergency lights will flash for about 3 minutes). To disarm system, insert ignition key and turn key to ACC position.
