General Specifications
| Transaxle model | A5CF2 | |
|---|---|---|
| Engine model | Gasoline 2.0L/Gasoline 2.4L | |
| Torque converter | 3 elements 2 phases 1 stage | |
| Torque converter size | Ø 236 | |
| Oil pump type | Parachoid | |
| A/T Case type | Separated | |
| Friction elements | Clutch: 4EA | |
| Brake: 3EA | ||
| OWC : 2EA | ||
| Planetary gear | 3EA | |
| Gear ratio | 1st | 3.939 |
| 2nd | 2.093 | |
| 3rd | 1.349 | |
| 4th | 0.962 | |
| 5th | 0.713 | |
| Reverse | 3.347 | |
| Final gear ratio | 3.099 | |
| Fluid pressure balance piston | 3EA | |
| Accumulator | 6EA | |
| Solenoid valve | 6EA (PWM:5EA, VFS:1EA), 7EA (PWM:6EA, VFS:1EA) | |
| Shift lever position | 4 range (P, R, N, D) | |
| Oil filter | 1EA | |
GENERAL SPECIFICATIONS
Tightening Torques
| Item | Nm | Kgf.m |
|---|---|---|
| Control cable bracket | 15~22 | 1.5~2.2 |
| Input speed sensor | 10~12 | 1.0~1.2 |
| Output speed sensor | 10~12 | 1.0~1.2 |
| Manual control lever | 17~21 | 1.7~2.1 |
| Inhibitor switch | 10~12 | 1.0~1.2 |
| Oil pan | 10~12 | 1.0~1.2 |
| Valve body mounting bolt | 10~12 | 1.0~1.2 |
| Oil drain plug | 40~50 | 4.0~5.0 |
| Pressure check plug | 8~10 | 0.8~1.0 |
| Front roll stopper bracket subframe bolt | 50~65 | 5.0~6.5 |
| Rear roll stopper bracket subframe bolt | 50~65 | 5.0~6.5 |
| Transaxle mounting bracket bolt | 90~110 | 9.0~11.0 |
TIGHTENING TORQUES