Home/Kia/Forte/Kia Forte I (2008-2013)/Repair manual/Body, Cab Control Systems/BCM (Body Control Module): Specifications
Contents Wiring diagrams Section: Body, Cab Control Systems All sections

BCM (Body Control Module): Specifications Kia Forte I

Specifications

ItemRequirementRemark
Rated voltageDC 12VShall activate normally in these range.
Operating voltage rangeDC 9 ~ 16V
Operating temperature range30°C ~ +75°C
Storage temperature range40°C ~ +85°C
Max humidity in use95%
High voltage resistance24V
Insulation resistance100Mohm or more (measured with 500V MEGGER)Specify as well as parts that insulation like PCB, moisture-proof COATING is required
Dark CurrentMax 4mA (KEYLESS) Max 3mA (NON-KEYLESS)Measure when the state, all output loads are OFF and there are no Input SW (including TX operation) changes, continues 2sec.
Voltage drop1.2V or lessOutput terminals for TAIL LAMP RELAY, POWER WINDOW RELAY, SAFETY POWER WINDOW, BURGLAR ALARM RELAY shall be 2.0V or less

GENERAL SPECIFICATIONS