CLEANING Jeep Grand Cherokee WK2

CLEANING

Clean the fan blades using a mild soap and water. Do not use an abrasive to clean the blades.

Scheme 37

1. Install the upper shroud cover (1). Apply pressure downwards until the cover snaps into place past clips (2).
2. Install cooling fan assembly into vehicle.
3. Guide the fan/shroud cover assembly into position between the radiator and upper core support.
4. Position cooling fan assembly onto the mounts (3) located on the radiator.
5. Lock in the fan (1) assembly into place by pressing down firmly on the shroud till the locks (3) engage.
6. Connect electric fan electrical connector (2).
7. Raise the vehicle.
8. Install the lower cooling shroud cover by applying upwards pressure till the cover snaps into place onto the cooling fan shroud.
9. If equipped, install the lower engine cover.
10. Lower vehicle.
11. Connect negative battery cable.
12. Install the air intake assembly.
13. Start engine and check fan operation.