Home/Jeep/Commander/Jeep Commander I (2005-2010)/Repair manual/Hoist/jack/Lubrication & Maintenance: Specifications
Contents Wiring diagrams Section: Hoist/jack All sections

Lubrication & Maintenance: Specifications Jeep Commander I

FLUID CAPACITIES

DESCRIPTIONSPECIFICATION
FUEL TANK76 L (20 U.S. gal.)*
ENGINE OIL
3.7 L4.7 L (5.0 qts.)**
4.7 L5.6 L (6.0 qts.)**
5.7 L6.6 L (7.0 qts.)**
3.0 L Diesel9.5 L (10.0 qts.)**
WARNING: Any time the oil is drained and filled it is critical to wait 15 minutes before starting the 3.0L CRD engine. WARNING: Before checking the 3.0L diesel engine oil level turn the engine off and wait 15 minutes for the oil to return to the oil pan.
COOLING SYSTEM
3.7 L10.0 L (9 qts.)***
4.7 L13.7 L (14.5 qts.)***
5.7 L13.7 L (14.5 qts.)***
3.0 L Diesel13.2 L (14.0 qts.)***
POWER STEERING SYSTEM
Power steering fluid capacities are dependent on engine/chassis options as well as steering gear/cooler options. Depending on type and size of internal cooler, length and inside diameter of cooler lines, or use of an auxiliary cooler, these capacities may vary. Refer to POWER STEERING SYSTEM BLEED PROCEDURE for proper fill and bleed procedures.
A/C REFRIGERANT SYSTEM
Single Unit0.68 kg (1.50 lbs.)
Dual Unit0.963 kg (2.125 lbs.)
AUTOMATIC TRANSMISSION
Service Fill - 545RFE2WD - 5.2 L (11 pts.)
4WD - 6.2 L (13 pts.)
Service Fill - NAG15.0 L (10.6 pts.)
Overhaul Fill - 545RFE13.33 L (28.0 pts.)!
Overhaul Fill - NAG17.7 L (16.3 pts)!
TRANSFER CASE
NV1400.65L (1.4 pts.)
NV2451.8L (3.8 pts.)
FRONT AXLE ± 0.3 L (2 oz.)
C200F1.7 L (57.5 oz.)
C200FE1.7 L (57.5 oz.)<
REAR AXLE ± 0.3 L (2 oz.)
C213R2.07 L (70 oz.)
C213RE2.24L (75.5 oz.)<
*Nominal refill capacities shown. Variation may be observed from vehicle to vehicle due to manufacturing tolerance and fill procedure.
**Capacity shown includes filter.
*** Includes 0.9L (1.0 qts.) for coolant reservoir.
<--ELSD, add 118 ml (4 oz.) of Friction Modifier.
!Dry fill capacity. Depending on type and size of internal cooler, length and inside diameter of cooler lines, or use of an auxiliary cooler, these figures may vary (refer to appropriate Transmission SERVICE INFORMATION article).
WARNING
Any time the oil is drained and filled it is critical to wait 15 minutes before starting the 3.0L CRD engine.
WARNING
Before checking the 3.0L diesel engine oil level turn the engine off and wait 15 minutes for the oil to return to the oil pan.

FLUID CAPACITIES