Base Audio System
The base system audio unit incorporates integral message display and 'Phone Ready' controls for installation of a GSM hands-free telephone system. A CD auto changer is installed in the trunk and six speakers are located two at each side of the facia and one in each door and rear quarter.
As in the base system, the audio unit incorporates integral message display and 'Phone Ready' controls, and a CD auto changer is installed in the trunk. The premium audio system also includes an amplifier unit installed in the trunk a sub-woofer speaker on the rear parcel shelf (a sub-woofer in each rear quarter on convertible models), two mid-range speakers in each door, a mid-range speaker in each rear quarter and a tweeter at each side of the facia.
An optional integrated navigation system supplied with the vehicle, or as a service fit accessory, interfaces with either of the above systems to provide control of voice guidance volume. All other navigation system functions are controlled from a separate display/controls panel installed in the facia above the audio unit.
Refer to PDU User Guide
The PDU is unable to diagnose radio head faults; there are no self-diagnostics associated with the radio.
PDU is able to test the speakers and the antenna, along with associated wiring and connections, therefore by a process of elimination, the radio head can be diagnosed.
Scheme 6
- Remove battery cover and disconnect ground lead from terminal. Refer to «BATTERY GROUND CABLE - REMOVAL AND INSTALLATION»(ref-311034-S13267168892009032300000) .
- Remove 'J' gate surround. Refer to «SELECTOR LEVER CABLE AND BRACKET - REMOVAL AND INSTALLATION»(ref-311060-S32835138532009032300000) .
- Move gear selector to 'D'.
- Remove center console assembly for access. Refer to «FLOOR CONSOLE - REMOVAL AND INSTALLATION»(ref-311041-S21848229192009032300000) .
- Remove the six radio console securing screws and partially withdraw the console for access.
- Disconnect radio assembly. Disconnect console harness multi-plugs and aerial co-axial connector. Remove nut securing earth lead to radio and remove lead from stud. Disconnect radio harness multi-plug and position harness clear of center console. Disconnect compact disc player 'Din' plug from radio.
- Remove radio. Release spring retaining clips, remove radio from console and remove radio from mounting panel.