Inspection and Verification
- Verify the customer concern.
- Visually inspect for obvious signs of electrical damage.
Visual Inspection Chart
| Electrical |
|---|
| Electrical connector(s) Wiring harness for damage or corrosion VACM module GEM module Microphone Instrument cluster Switch(s) Speakers |
VISUAL INSPECTION CHART
- If an obvious cause for an observed or reported concern is found, correct the cause (if possible) before proceeding to the next step.
- If the cause is not visually evident, verify the symptom and refer to the .
Scheme 4
Scheme 5
- Disconnect the battery ground cable. For additional information, refer to .
- Disconnect the generic electronic module (GEM) electrical connectors.
- Remove the GEM. Press the tang. Remove the GEM