DIAGNOSTIC TROUBLE CODE INDEX
| DTC | Description |
|---|---|
| DTC U1900 | CAN circuit fault |
| DTC U1900 | CAN circuit fault |
| DTC U1900 | CAN circuit fault |
| DTC U1900 | CAN circuit fault |
| DTC U2202 | Invalid CAN configuration data received from ECM |
| DTC U2202 | Invalid CAN configuration data received from ECM |
| DTC U2509 | ECM unable to fulfill CAN torque reduction request |
| DTC U2509 | ECM unable to fulfill CAN torque reduction request |
| DTC U2003 | CD autochanger not responding on D2B network |
| DTC U2008 | CPCM not responding on D2B network |
| DTC U2019 | VACM not responding on D2B network |
| DTC U2613 | NCM not responding on D2B network |
| DTC U2600 | D2B network "wake-up" circuit fault |
| DTC U2601 | D2B network "wake-up" circuit fault |
| DTC U1262 | SCP network circuit fault |
| DTC U1041 | SCP network invalid VEHICLE SPEED data |
| DTC U1135 | SCP network invalid IGNITION SWITCH data |
| DTC U1147 | SCP network invalid IGNITION KEY-IN data |
| DTC U1262 | SCP network IGNITION SWITCH state message missing |
| DTC U2514 | SCP network VEHICLE SPEED message missing |
| DTC U2510 | PATS ECM identification mismatch Security LED flash code 23 |
| DTC U2511 | PATS ECM invalid data |
| DTC U2196 | CAN ENGINE SPEED message invalid |
| DTC U2197 | CAN VEHICLE SPEED message invalid |
| DTC U1900 | CAN instrumentation messages missing |
| DTC U2199 | CAN ENGINE COOLANT TEMPERATURE message invalid |
| DTC U2200 | CAN ODOMETER COUNT message invalid |
| DTC U2601 | D2B network "wake-up" circuit fault |
| DTC U2609 | D2B network "wake-up" signal out of specification |
| DTC U2610 | D2B network "position status report" not received |
| DTC U2611 | D2B network "alarm clear command" not received |
DIAGNOSTIC TROUBLE CODE INDEX
CM
A/CCMA