Home/Isuzu/Trooper/Isuzu Trooper II (1992-2002)/Repair manual/Mechanical/Removal (SOHC): Removal & Installation

Contents

Wiring diagrams Section: Mechanical

Engine Identification

Valve Clearance Adjustment

Accelerator Cable

Removal & Installation (DOHC)

Removal & Installation (SOHC)

Removal & Installation (DOHC Left Side - Amigo, Passport & Rodeo)

Removal & Installation (DOHC Right Side - Amigo, Passport & Rodeo)

Removal & Installation (DOHC Left Side - Slx & Trooper)

Removal & Installation (DOHC Right Side - Slx & Trooper)

Removal & Installation (SOHC Left Side)

Removal & Installation (SOHC Right Side)

Removal (DOHC)

Installation (SOHC)

Removal & Installation

Oil Pan

Cylinder Head

Valve Springs

Valve Stem Oil Seals

Valve Guides

Valves

Valve Seat Correction Angles

Rocker Arm Assembly (SOHC)

Valve Lifters (SOHC)

Piston & Rod Assembly

Fitting Pistons

Piston Pins

Piston Rings

Rod Bearings

Crankshaft & Main Bearings

Thrust Bearing

Cylinder Block

Engine Lubrication System

Crankcase Capacity

Oil Pressure

Removal & Disassembly

Reassembly & Installation

Torque Specifications

Engine Specifications

Crankshaft, Main & Connecting Rod Bearings

Connecting Rods

Pistons, Pins & Rings

Valves & Valve Springs

Camshaft

Valve Lifters

All sections

Removal (SOHC): Removal & Installation Isuzu Trooper II

Mechanical ~106 words

Installation

To install, reverse removal procedure. Lubricate oil seal lip with engine oil. Install seal using seal driver.

Disconnect negative battery cable. Remove air cleaner assembly. Remove upper fan shroud. Remove all accessory drive belts. Remove cooling fan assembly.
Remove cooling fan drive pulley assembly. Using Puller (J-8614-01), remove crankshaft pulley bolt and pulley. On SOHC, remove oil cooler hose from timing cover. On both engines, remove timing belt cover. Align all timing marks prior to belt removal. (Схема №6)and (Схема №7) for SOHC models. Mark timing belt direction of rotation if reusing belt. Remove belt tensioner pusher and timing belt.