WINDOW REGULATOR ASSEMBLY
- Remove door panel. See «DOOR PANEL»(ref-4257-S03945872092000061700000) . Remove plastic cover. Remove power window switch from door panel and reconnect it to door wiring harness.
- Move glass up or down until bolts are visible, then loosen bolts. Slide guide forward. Carefully remove glass from guide and pull out through window slot.
- Disconnect motor connector and detach harness clip from door. Scribe a line around rear roller guide to mark original installation position. Unbolt and remove regulator through hole in door. To install, reverse removal procedure. To align glass, see «DOOR GLASS»(ref-4257-S32279378092000061700000) under ADJUSTMENTS.