Power Window Control System (Convertible): Application

Power Window Control System (Convertible): Application Infiniti Q60 I

APPLICATION ITEM

CONSULT performs the following functions via CAN communication with BCM.

Diagnosis mode	Function Description
Work Support	Changes the setting for each system function.
Self Diagnostic Result	Displays the diagnosis results judged by BCM.
CAN Diag Support Monitor	Monitors the reception status of CAN communication viewed from BCM.
Data Monitor	The BCM input/output signals are displayed.
Active Test	The signals used to activate each device are forcibly supplied from BCM.
Ecu Identification	The BCM part number is displayed.
Configuration	This function is not used even though it is displayed.

BCM can perform the following functions for each system.

Note. It can perform the diagnosis modes except the following for all sub system selection items.

X: Applicable item
System	Sub system selection item	Diagnosis mode
System	Sub system selection item	Work Support	Data Monitor	Active Test
Door lock	DOOR LOCK	X	X	X
Rear window defogger	REAR DEFOGGER		X	X
Warning chime	BUZZER		X	X
Interior room lamp timer	INT LAMP	X	X	X
	MULTI REMOTE ENT (1)
Exterior lamp	HEAD LAMP	X	X	X
Wiper and washer	WIPER	X (2)	X	X
Turn signal and hazard warning lamps	FLASHER	X	X	X
	AIR CONDITONER (1)
Intelligent Key system Engine start system	INTELLIGENT KEY	X	X	X
Combination switch	COMB SW		X
Body control system	BCM	X
IVIS - NATS	IMMU		X	X
Interior room lamp battery saver	BATTERY SAVER	X	X	X
Trunk lid open	TRUNK		X	X
Vehicle security system	THEFT ALM	X	X	X
RAP system	RETAINED PWR		X
Signal buffer system	SIGNAL BUFFER		X	X
TPMS	AIR PRESSURE MONITOR	X	X	X
(1) This item is displayed, but is not used. (2) At models with rain sensor this mode is displayed, but is not used.

(1)	This item is displayed, but is not used.

(2)	At models with rain sensor this mode is displayed, but is not used.