Transfer: Overhaul Infiniti M45 III

Mainshaft Assembly

1. Separate front case and rear case, then remove mainshaft assembly. Refer to , " «FRONT CASE AND REAR CASE»(ref-239130-S33108720262006072700000) ".
2. Remove snap ring from mainshaft.
3. Remove spacer from mainshaft.
4. Remove electric controlled coupling and sprocket from mainshaft.
5. Remove needle bearing from mainshaft.

Scheme 55

Scheme 56

Scheme 57

1. Separate front case and rear case. Refer to , " «FRONT CASE AND REAR CASE»(ref-239130-S33108720262006072700000) ".
2. Remove drive chain and front drive shaft while tapping front drive shaft with plastic hammer. CAUTION: Be careful not to tap drive chain.
3. Remove front drive shaft front bearing, using the drift and puller. Tool number: ST31214000 (J-25269-B)
4. Remove front drive shaft rear bearing, using the drift and puller. Tool number: ST31214000 (J-25269-B)

Scheme 58