Steering Control System: Overhaul Infiniti M45 III

DISASSEMBLY

1. Remove mounting bolts of RAS motor assembly, and then remove RAS motor assembly, ground terminal, O-ring from RAS actuator.
2. Remove mounting bolt of rear wheel steering angle sensor, and then remove rear wheel steering angle sensor, O-ring from RAS actuator.

ASSEMBLY

1. Assembly is the reverse order of disassembly. For tightening torque, refer to " «COMPONENTS»(ref-239134-S30972924822006072700000) ".
2. After assembling RAS actuator assembly (after removing and installing rear wheel angle sensor and RAS motor), perform the neutral position adjustment.