Home/Infiniti/G20/Infiniti G20 II (1999-2002)/Repair manual/Specifications/Engine Controls - Service & Adjustment Specifications: Spec…
Contents Wiring diagrams Section: Specifications All sections

Engine Controls - Service & Adjustment Specifications: Specifications Infiniti G20 II

G20 FLUID CAPACITIES

ApplicationQuantity
Crankcase (Includes Filter)3.6 Qts. (3.4L)
Cooling System (Includes Heater)6.6 Qts. (6.2L)
Transaxle
A/T (Nissan Matic D) (1)7.4 Qts. (7.0L)
M/T (SAE 75W-90/API GL-4)3.2 Qts. (3.0L)
(1) Dexron III may be used.
(1)Dexron III may be used.

G20 FLUID CAPACITIES

Q45 FLUID CAPACITIES

ApplicationQuantity
Crankcase (Includes Filter)5.7 Qts. (5.3L)
Cooling System (Includes Heater)12.4 Qts. (11.7L)
Transmission (Nissan Matic D) (1)11.2 Qts. (10.5L)
Differential (SAE 80W-90/API GL-5)1.4 Qts. (1.3L)
(1) Dexron III may be used.
(1)Dexron III may be used.

Q45 FLUID CAPACITIES

SERVICE INTERVALS & SPECIFICATIONS

ComponentMonths (2)(2) Miles
Accessory Drive Belts (3)4860,000
Air Filter2430,000
Coolant (4)4860,000
Fuel Filter(5)(5)
Oil & Filter67500
Spark Plugs(6)(7)
(1) More often under severe operating conditions. (2) Perform at month or mile interval, whichever comes first. (3) Inspect and replace, if necessary. (4) First change, then every 24 months or 30,000 miles (5) Replace when plugged. (6) Information not available from manufacturer. (7) Replace platinum spark plugs every 105,000 miles. Replace conventional spark plugs every 30,000 miles.
(1)More often under severe operating conditions.
(2)Perform at month or mile interval, whichever comes first.
(3)Inspect and replace, if necessary.
(4)First change, then every 24 months or 30,000 miles
(5)Replace when plugged.
(6)Information not available from manufacturer.
(7)Replace platinum spark plugs every 105,000 miles. Replace conventional spark plugs every 30,000 miles.

REPLACEMENT INTERVALS (1)