Home/Infiniti/G20/Infiniti G20 II (1999-2002)/Repair manual/Specifications/Engine Controls - Service & Adjustment Specifications: Adju…

Contents

Wiring diagrams Section: Specifications

All sections

Engine Controls - Service & Adjustment Specifications: Adjustments Infiniti G20 II

Specifications

G20 DRIVE BELT ADJUSTMENT

Application		New Belt Deflection (1)	(1) Used Belt Deflection
Generator
With A/C		.27-.26" (5.5-6.5 mm)	.18-.27" (4.5-5.5 mm)
Without A/C		.28-.31" (7.0-8.0 mm)	.31-.35" (8.0-9.0 mm)
Power Steering		.28-.31" (7.0-8.0 mm)	.31-.35" (8.0-9.0 mm)
(1) With 22 lbs. (10 kg) pressure applied at center of longest belt run.

(1)	With 22 lbs. (10 kg) pressure applied at center of longest belt run.

G20 BELT ADJUSTMENT

Q45 DRIVE BELT ADJUSTMENT

Application	New Belt Deflection (1)	(1) Used Belt Deflection
A/C Compressor	.31-.35" (8.0-9.0 mm)	.35-.39" (9.0-10.0 mm)
Generator	.14-.18" (3.5-4.5 mm)	.16-.20" (4.0-5.0 mm)
P/S	.31-.35" (8.0-9.0 mm)	.35-.39" (9.0-10.0 mm)
Water Pump	.20-.24" (5.0-6.0 mm)	.24-.28" (6.0-7.0 mm)
(1) With 22 lbs. (10 kg) pressure applied at center of longest belt run.

(1)	With 22 lbs. (10 kg) pressure applied at center of longest belt run.

Q45 BELT ADJUSTMENT