Home ReviewsRefund
Home/Infiniti/FX50/Infiniti FX50 II (2008-2012)/Repair manual/Interior Lighting System/STEP LAMP CONTROL
Contents Wiring diagrams Section: Interior Lighting System All sections

STEP LAMP CONTROL Infiniti FX50 II

Interior Lighting System 1 illustration ~133 words

STEP LAMP CONTROL

BCM controls the step lamp (ground-side) to turn the step lamp ON when any door switch is ON.

Scheme 39

Scheme 39: Component Parts Location
Scheme 39: Component Parts Location
  1. Interior room lamp battery saver is controlled by battery saver function of BCM.
  2. BCM cuts the interior room lamp power supply depending on the vehicle condition. Total illumination control unit cuts the hospitality lighting power supply according to interior room lamp power supply (battery saver signal). This function prevents the battery from over-discharging if the driver neglects turning OFF the lamps.

Applicable lamps

Control by the total illumination control unit

  1. Push-button ignition switch illumination
  2. Map lamp and personal lamps
  3. Center console indirect illumination
  4. Vanity mirror lamps
  5. Puddle lamps
  6. Foot lamps
  7. Mood lamps (Door armrest)
  8. Each illumination (Clock, switches, etc.

Control by BCM

  1. Step lamps
  2. Luggage room lamps