Contents Wiring diagrams Section: Navigation System All sections

Back View Camera System: Overview Hyundai Veloster I

Navigation System 3 illustrations

Description

Back view camera will activate when the backup light is ON with the ignition switch ON and the shift lever in the R position. This system is a supplemental system that shows behind the vehicle through the AV monitor while backing-up.

WARNINGThis system is a supplementary function only. It is the responsibility of the driver to always check the inside/outside rearview mirror and the area behind the vehicle before and during backing up because there are blind spots that can't be seen through the camera.

Scheme 63

Scheme 63: Component Location

Scheme 64

Scheme 64: Circuit Diagram

Scheme 65

Scheme 65: Back View Camera
  1. Disconnect the negative (-) battery terminal.
  2. Remove the tailgate outside handle assembly. (Refer to «POWER DOOR LOCKS»(/hyundai/veloster/i-2011-2015/remont/door-locks-anti-theft-systems/#power-door-locks) .
  3. Disconnect the rear view camera connector (A) after loosening 2 screws.

See also:
POWER DOOR LOCKS