Home ReviewsRefund
Home/Hyundai/Tucson/Hyundai Tucson I (2004-2011)/Repair manual/Automatic Transaxle System/Oil Temperature Sensor
Contents Wiring diagrams Section: Automatic Transaxle System All sections

Oil Temperature Sensor Hyundai Tucson I

Automatic Transaxle System 5 illustrations ~123 words

Oil Temperature Sensor

The oil temperature sensor is of the thermistor type, and senses the automatic transaxle fluid temperature. Using the signal from this sensor, TCM controls the shift pattern optimally during shift. In order to operate the damper clutch, this signal is also referred.

  1. Range of temperature: -40°C ~ 145°C
  2. Type: Separated type (High / Low temperature)
  3. Standard value of internal resistance
Temp.[°C (°F)]Resistance (kohms)Temp.[°C (°F)]Resistance (kohms)
40 (-40)139.580 (176)1.08
20 (-4)47.7100 (212)0.63
0 (32)18.6120 (248)0.38
20 (68)8.1140 (284)0.25
40 (104)3.8160 (320)0.16
60 (140)1.98

TEMPERATURE RESISTANCE CHART

Scheme 151

Scheme 151
Scheme 151

Scheme 152

Scheme 152: Inhibitor Switch
Scheme 152: Inhibitor Switch
  1. Type: Rotary contact type
  2. Range of temperature: -40°C ~ 145°C

Scheme 153

Scheme 153: INHIBITOR SWITCH - CONTINUITY CHECK (SPORTS MODE)
Scheme 153: INHIBITOR SWITCH - CONTINUITY CHECK (SPORTS MODE)

Scheme 154

Scheme 154: Solenoid Valve for Pressure Control
Scheme 154: Solenoid Valve for Pressure Control
  1. Sensor type: Normal open 3-way
  2. Operating temperature: -30°C ~ 130°C
  3. Frequency: LR, 2ND, UD, OD: 61.27Hz (at the ATF temp. -20°C above) DCC: 30.64Hz
  4. Internal resistance: 2.6ohms or more
  5. Surge voltage: 56 V

LOCATION

Scheme 155

Scheme 155
Scheme 155