Home ReviewsRefund
Home/Hyundai/Genesis/Hyundai Genesis I рестайлинг (2011-2016)/Repair manual/Steering Column Switches/Multifunction Switch Diagnosis: Other
Contents Section: Steering Column Switches All sections

Multifunction Switch Diagnosis: Other Hyundai Genesis I рестайлинг

Steering Column Switches 11 illustrations ~478 words

Verification of Vehicle Repair

After a repair, it is essential to verify that the fault has been corrected.

  1. Connect scan tool and select "DTC Analysis" mode.
  2. Clear the DTCs and Operate the vehicle within DTC Enable conditions in General information.
  3. Is any DTC outputted again? YES Go to the applicable troubleshooting procedure. NO System performing to specification at this time.

Scheme 73

Scheme 73: Component Location
Scheme 73: Component Location

Scheme 74

Scheme 74
Scheme 74

Scheme 75

Scheme 75
Scheme 75

After a repair, it is essential to verify that the fault has been corrected.

  1. Connect scan tool and select "DTC Analysis" mode.
  2. Clear the DTCs and Operate the vehicle within DTC Enable conditions in General information.
  3. Is any DTC outputted again? YES Go to the applicable troubleshooting procedure. NO System performing to specification at this time.

Scheme 76

Scheme 76: Component Location
Scheme 76: Component Location

Scheme 77

Scheme 77
Scheme 77

Scheme 78

Scheme 78
Scheme 78

After a repair, it is essential to verify that the fault has been corrected.

  1. Connect scan tool and select "DTC Analysis" mode.
  2. Clear the DTCs and Operate the vehicle within DTC Enable conditions in General information.
  3. Is any DTC outputted again? YES Go to the applicable troubleshooting procedure. NO System performing to specification at this time.

Scheme 79

Scheme 79: Component Location
Scheme 79: Component Location

After a repair, it is essential to verify that the fault has been corrected.

  1. Connect scan tool and select "DTC Analysis" mode.
  2. Clear the DTCs and Operate the vehicle within DTC Enable conditions in General information.
  3. Is any DTC outputted again? YES Go to the applicable troubleshooting procedure. NO System performing to specification at this time.

Scheme 80

Scheme 80: Component Location
Scheme 80: Component Location

After a repair, it is essential to verify that the fault has been corrected.

  1. Connect scan tool and select "DTC Analysis" mode.
  2. Clear the DTCs and Operate the vehicle within DTC Enable conditions in General information.
  3. Is any DTC outputted again? YES Go to the applicable troubleshooting procedure. NO System performing to specification at this time.

Scheme 81

Scheme 81: Component Location
Scheme 81: Component Location

After a repair, it is essential to verify that the fault has been corrected.

  1. Connect scan tool and select "DTC Analysis" mode.
  2. Clear the DTCs and Operate the vehicle within DTC Enable conditions in General information.
  3. Is any DTC outputted again? YES Go to the applicable troubleshooting procedure. NO System performing to specification at this time.

Scheme 82

Scheme 82: Component Location
Scheme 82: Component Location

After a repair, it is essential to verify that the fault has been corrected.

  1. Connect scan tool and select "DTC Analysis" mode.
  2. Clear the DTCs and Operate the vehicle within DTC Enable conditions in General information.
  3. Is any DTC outputted again? YES Go to the applicable troubleshooting procedure. NO System performing to specification at this time.

Scheme 83

Scheme 83: Component Location
Scheme 83: Component Location

After a repair, it is essential to verify that the fault has been corrected.

  1. Connect scan tool and select "DTC Analysis" mode.
  2. Clear the DTCs and Operate the vehicle within DTC Enable conditions in General information.
  3. Is any DTC outputted again? YES Go to the applicable troubleshooting procedure. NO System performing to specification at this time.

More articles — Multifunction Switch Diagnosis