Home ReviewsRefund
Home/Hyundai/Azera/Hyundai Azera II (2011-2014)/Repair manual/Collision/avoidance/Front Back View Camera System: Other
Contents Wiring diagrams Section: Collision/avoidance All sections

Front Back View Camera System: Other Hyundai Azera II

Collision/avoidance

Front View Camera Switch

  1. Disconnect the negative (-) battery terminal.
  2. Remove the crash pad lower panel in the driver side. (Refer to " «CRASH PAD LOWER PANEL»(ref-585027-S26800232562013110700000) ")
  3. Remove the crash pad switch assembly (A) by pushing both clips. CAUTION: Wear the glove not to damage your hands.

Front View Camera

  1. Install the front view camera.
  2. Install the front bumper.
  1. Install the rear view camera.
  2. Install the rear garnish assembly.
  1. Connect the connector and install the side switch assembly.

More articles — Front Back View Camera System