Home/Hyundai/Accent/Hyundai Accent I (1994-2000)/Repair manual/Procedures/Maintenance Information: Specifications
Contents Wiring diagrams Section: Procedures All sections

Maintenance Information: Specifications Hyundai Accent I

Procedures ~136 words

WHEEL & TIRE SPECIFICATIONS

Tire specifications are imprinted on the tire sidewall. The recommended cold tire inflation pressures are listed on a label on the inside of the glove compartment door. These pressures provide the best combination of ride comfort, tire wear and stability under normal conditions.

WHEEL TORQUE SPECIFICATIONS

Wheel TypeFt. lbs. (N.m.)
Steel & Aluminum65-80 (90-110)

WHEEL TORQUE SPECIFICATIONS

BATTERY SPECIFICATIONS

CAUTIONWhen battery is disconnected, vehicles equipped with computers may lose memory data. When battery power is restored, driveability problems may exist on some vehicles. These vehicles may require a relearn procedure. See COMPUTER RELEARN PROCEDURES article in the GENERAL INFORMATION Section.

Battery is located under the engine hood on right hand side as seen in driving direction. Vehicles are delivered with maintenance-free battery. Water need never be added. Battery condition can be checked by a visual test indicator. A Green indicator indicates normal condition, a White indicator implies charging is required and a Red indicator means replacement is necessary. If battery is replaced, new battery should be of the same group number as shown on the original battery's label.