Home ReviewsRefund
Home/Hummer/H2/Hummer H2 I (2002-2007)/Repair manual/Communication Devices/Body Control System: Removal & Installation
Contents Wiring diagrams Section: Communication Devices All sections

Body Control System: Removal & Installation Hummer H2 I

Communication Devices ~114 words

Removal Procedure

  1. Disconnect the battery cable. Refer to «Battery Negative Cable Disconnect/Connect Procedure (Single Battery)»(ref-187208-S04260183982005083100000) in Engine Electrical.
  2. Remove the I/P carrier. Refer to «Instrument Panel (I/P) Carrier Replacement»(ref-187217-S30750948582005083100000) in Instrument Panel, Gauges and Console.
  3. Remove the body control module (1) from the body control module bracket.

Installation Procedure

  1. Install the body control module (1) into the bracket.
  2. Install the I/P carrier. Refer to «Instrument Panel (I/P) Carrier Replacement»(ref-187217-S30750948582005083100000) in Instrument Panel, Gauges and Console.
  3. Connect the battery negative cables. Refer to «Battery Negative Cable Disconnect/Connect Procedure (Single Battery)»(ref-187208-S04260183982005083100000) in Engine Electrical.
  4. Setup the body control modules customized options. Refer to «Body Control Module (BCM) Programming/RPO Configuration»(ref-187207-S30610402452005083100000) .

More articles — Body Control System