Convertible Top: Overview Honda S2000 AP1

Scheme 1

Scheme 2

Scheme 3

Note. Have an assistant help you remove the convertible top assembly. Take care not to scratch the top cloth and body. Put on gloves to protect your hands. If the top does not move with the convertible top switch, disconnect the emergency connector near the passenger's kick panel (see CONVERTIBLE TOP MOTOR TEST ), and move the top by hand.

Scheme 4

Scheme 5

1. Remove both rear tray side trims (see «TRIM REMOVAL/INSTALLATION - REAR TRAY AREA»(ref-221365-S38909043212006022400000) ).
2. Remove the top in the numbered sequence.
3. Install the convertible top in the reverse order of removal, and note these items: Make sure the connectors are plugged in properly. Check operation of the top. Check that each top lock handle works smoothly. If necessary, adjust the hook position (see «CONVERTIBLE TOP LOCK HANDLE OPERATION LOAD ADJUSTMENT»(ref-221363-S25667785522006022400000) ). Check that each door glass contacts the weatherstrips evenly. Check for water leaks (see step 17 in «DOOR GLASS ADJUSTMENT»(ref-221360-S32056919222006022400000) ). Test-drive and check for wind noise and rattles.