Home ReviewsRefund
Home/Honda/S2000/Honda S2000 AP1 (1999-2003)/Repair manual/SRS (Supplemental Restraint System)/Disconnecting
Contents Wiring diagrams Section: SRS (Supplemental Restraint System) All sections

Disconnecting Honda S2000 AP1

SRS (Supplemental Restraint System) 3 illustrations ~107 words

Disconnecting

To release the lock, pull the spring-loaded sleeve (A) toward the stop (B) while holding the opposite half of the connector. Then pull the connector halves apart. Be sure to pull on the sleeve and not on the connector.

Scheme 221

Scheme 221: Disconnecting
Scheme 221: Disconnecting

Scheme 222

Scheme 222: Connecting
Scheme 222: Connecting

Scheme 223

Scheme 223
Scheme 223
  1. To reconnect, hold the pawl-side connector, and press on the back of the sleeve-side connector in the direction shown. As the two connector halves are pressed together, the sleeve (A) is pushed back by the pawl (B). Do not touch the sleeve.
  2. When the connector halves are completely connected, the pawl is released, and the spring-loaded sleeve locks the connector.