Torque Specifications - General: Other — Honda Ridgeline I рестайлинг (2009-2014)

Engine Electrical - Ridgeline

Location	Item	Torque
Starting System	Starter bolts	44 N.m (4.5 kgf.m, 33 lbf.ft)
	Starter harness clamp nut	9.0 N.m (0.92 kgf.m, 6.6 lbf.ft)
Ignition System	Spark plugs	22 N.m (2.2 kgf.m, 16 lbf.ft)
Charging System	Alternator bolt (8 mm)	22 N.m (2.2 kgf.m, 16 lbf.ft)
	Alternator bolt (10 mm)	45 N.m (4.5 kgf.m, 33 lbf.ft)
	Alternator cable nut (8 mm)	12 N.m (1.2 kgf.m, 9 lbf.ft)
	Drive belt auto-tensioner bolt (8 mm)	22 N.m (2.2 kgf.m, 16 lbf.ft)
	Drive belt auto-tensioner pulley bolt (10 mm)	80 N.m (8.2 kgf.m, 59 lbf.ft)
	Idler pulley bolt (10 mm)	44 N.m (4.6 kgf.m, 33 lbf.ft)

ENGINE ELECTRICAL SPECIFICATIONS CHART

Engine Mechanical

Location	Item	Remark	Torque
Engine Assembly	Engine hanger bolts		22 N.m (2.2 kgf.m, 16 lbf.ft)
	Front engine mount bracket bolts	Use new bolts	38 N.m (3.9 kgf.m, 28 lbf.ft)
	Front engine mount bolt (10 mm) Qty 1	Use new bolt	54 N.m (5.5 kgf.m, 40 lbf.ft)
	Front engine mount bolts (10 mm) Qty 4	Use new bolts	38 N.m (3.9 kgf.m, 28 lbf.ft)
	Front engine mount stop nuts	Use new nuts	74 N.m (7.5 kgf.m, 54 lbf.ft)
	Power steering pump bracket bolts		22 N.m (2.2 kgf.m, 16 lbf.ft)
	Rear engine mount bracket bolts	Use new bolts	88 N.m (9.0 kgf.m, 65 lbf.ft)
	Rear engine mount bolt (12 mm)	Use new bolt	83 N.m (8.5 kgf.m, 61 lbf.ft)
	Rear engine mount bolts (10 mm)		38 N.m (3.9 kgf.m, 28 lbf.ft)
	Side engine mount bracket bolts	Use new bolts	44 N.m (4.5 kgf.m, 33 lbf.ft)
	Side engine mount bolt (12 mm)	Use new bolt	54 N.m (5.5 kgf.m, 40 lbf.ft)
	Side engine mount bolts (10 mm)		38 N.m (3.9 kgf.m, 28 lbf.ft)
	Transmission lower mount bolts		44 N.m (4.5 kgf.m, 33 lbf.ft)
Engine Block	Rocker arm oil control solenoid assembly bolts		22 N.m (2.2 kgf.m, 16 lbf.ft)
Engine Lubrication	Oil filter		12 N.m (1.2 kgf.m, 9 lbf.ft)
	Oil filter feed pipe	Use oil on threads	35 N.m (3.6 kgf.m, 26 lbf.ft)
	Oil pan drain bolt	Use new washer	39 N.m (4.0 kgf.m, 29 lbf.ft)
	Oil pressure switch	Use new O-ring	22 N.m (2.2 kgf.m, 16 lbf.ft)
Intake Manifold and Exhaust System	Intake manifold bolts*1		22 N.m (2.2 kgf.m, 16 lbf.ft)
	Intake manifold nuts*1		22 N.m (2.2 kgf.m, 16 lbf.ft)
	Injector base bolts		22 N.m (2.2 kgf.m, 16 lbf.ft)
	Injector base nuts		22 N.m (2.2 kgf.m, 16 lbf.ft)
	Exhaust pipe A self-locking nuts (Warm up TWC side)	Use new nuts	54 N.m (5.5 kgf.m, 40 lbf.ft)
	Exhaust pipe A self-locking nuts (Under-floor TWC side)*1	Use new nuts	33 N.m (3.4 kgf.m, 25 lbf.ft)
	Muffler self-locking nuts	Use new nuts	33 N.m (3.4 kgf.m, 25 lbf.ft)
1: Parts to be tightened in a particular order. 2: Follow the S/M procedures closely for torque, sequence, and special steps.

ENGINE MECHANICAL SPECIFICATIONS CHART

Engine Cooling

Location	Item	Remark	Torque
Cooling System	Water passage bolts		22 N.m (2.2 kgf.m, 16 lbf.ft)
Cooling System	Water passage nuts		22 N.m (2.2 kgf.m, 16 lbf.ft)

ENGINE COOLING SPECIFICATIONS CHART

Fuel Emissions

Location	Item	Remark	Torque
Fuel and Emissions	A/F sensor		44 N.m (4.5 kgf.m, 33 lbf.ft)
	EGR pipe bolts		22 N.m (2.2 kgf.m, 16 lbf.ft)
	EGR pipe nuts		22 N.m (2.2 kgf.m, 16 lbf.ft)
	EGR valve nuts		22 N.m (2.2 kgf.m, 16 lbf.ft)
	EVAP canister bracket nuts		22 N.m (2.2 kgf.m, 16 lbf.ft)
	Fuel tank guard bolts		22 N.m (2.2 kgf.m, 16 lbf.ft)
	Fuel joint hose bolt		22 N.m (2.2 kgf.m, 16 lbf.ft)
	Fuel tank locknut*2		93 N.m (9.5 kgf.m, 69 lbf.ft)
	Fuel tank support straps bolts		64 N.m (6.5 kgf.m, 47 lbf.ft)
	Knock sensor		31 N.m (3.2 kgf.m, 23 lbf.ft)
	Rocker arm oil pressure switch		22 N.m (2.2 kgf.m, 16 lbf.ft)
	Secondary HO2S		44 N.m (4.5 kgf.m, 33 lbf.ft)
	Throttle body bolts		22 N.m (2.2 kgf.m, 16 lbf.ft)
	Under floor TWC self-locking nuts	Use new nuts	33 N.m (3.4 kgf.m, 25 lbf.ft)
	Warm up TWC bracket bolts		45 N.m (4.6 kgf.m, 33 lbf.ft)
	Warm up TWC (front bank) upper self-locking nuts	Use new nuts	31 N.m (3.2 kgf.m, 23 lbf.ft)
	Warm up TWC (rear bank) upper self-locking nuts	Use new nuts	31 N.m (3.2 kgf.m, 23 lbf.ft)
1: Parts to be tightened in a particular order. 2: Follow the S/M procedures closely for torque, sequence, and special steps.

FUEL EMISSIONS SPECIFICATIONS CHART

Automatic Transmission

Location	Item	Remark	Torque
Automatic Transmission	ATF drain plug	Use new sealing washer	49 N.m (5.0 kgf.m, 36 lbf.ft)
	ATF filler bolt	Use new sealing washer	44 N.m (4.5 kgf.m, 33 lbf.ft)
	Clutch pressure inspection hole sealing bolts	Use new sealing washer	18 N.m (1.8 kgf.m, 13 lbf.ft)
	Drive plate bolts*2		74 N.m (7.5 kgf.m, 54 lbf.ft)
	Shift lever assembly bolts		22 N.m (2.2 kgf.m, 16 lbf.ft)
	Transfer fluid drain plug	Use new sealing washer	44 N.m (4.5 kgf.m, 33 lbf.ft)
	Transfer fluid filler plug	Use new sealing washer	44 N.m (4.5 kgf.m, 33 lbf.ft)
	Transfer assembly bolts		51 N.m (5.2 kgf.m, 38 lbf.ft)
	Transmission fluid pressure switches	Use new sealing washer	20 N.m (2.0 kgf.m, 14 lbf.ft)
	Transmission housing mounting bolts		64 N.m (6.5 kgf.m, 47 lbf.ft)
A/T Gear Position Indicator	Selector control lever locknut	Use new lock washer	16 N.m (1.6 kgf.m, 12 lbf.ft)
A/T Gear Position Indicator	Transmission range switch locknut	Use new lock washer	17 N.m (17 kgf.m, 13 lbf.ft)

AUTOMATIC TRANSMISSION SPECIFICATIONS CHART

Rear Differential

Location	Item	Remark	Torque
Rear Differential	Rear differential fluid filler plug	Use new sealing washer	47 N.m (4.8 kgf.m, 35 lbf.ft)
	Rear differential fluid drain plug	Use new sealing washer	47 N.m (4.8 kgf.m, 35 lbf.ft)
	Rear differential fluid temperature sensor	Use new O-ring	18 N.m (1.8 kgf.m, 13 lbf.ft)
	Rear differential bolts (14 mm)	Use new bolts	85 N.m (8.7 kgf.m, 63 lbf.ft)
	Rear differential bolt (10 mm)	Use new bolt	55 N.m (5.6 kgf.m, 41 lbf.ft)

REAR DIFFERENTIAL SPECIFICATIONS CHART

Driveline/Axle

Location	Item	Remark	Torque
Driveline/Axle	Front drive shaft spindle nut (26 mm)	Use oil on threads Use new nut	328 N.m (33.5 kgf.m, 242 lbf.ft)
	Rear drive shaft spindle nut (24 mm)	Use oil on threads Use new nut	245 N.m (25.0 kgf.m, 181 lbf.ft)
	Intermediate shaft dowel bolts		39 N.m (4.0 kgf.m, 29 lbf.ft)
	Intermediate shaft flange bolt		39 N.m (4.0 kgf.m, 29 lbf.ft)
	Heat shield bolts		22 N.m (2.2 kgf.m, 16 lbf.ft)
	No. 1 propeller shaft bolts	Use new bolts	72 N.m (7.3 kgf.m, 53 lbf.ft)
	No. 2 propeller shaft bolts	Use new bolts	72 N.m (7.3 kgf.m, 53 lbf.ft)
	No. 1 propeller shaft protector bolts		22 N.m (2.2 kgf.m, 16 lbf.ft)
	No. 2 propeller shaft protector bolts		22 N.m (2.2 kgf.m, 16 lbf.ft)
	Center support bearing bolts	Use new bolts	39 N.m (4.0 kgf.m, 29 lbf.ft)

DRIVELINE/AXLE SPECIFICATIONS CHART

Steering

Location	Item	Remark	Torque
Steering	Steering wheel nut		49 N.m (5.0 kgf.m, 36 lbf.ft)
	Steering joint bolts		22 N.m (2.2 kgf.m, 16 lbf.ft)
	Steering column bolts		22 N.m (2.2 kgf.m, 16 lbf.ft)
	Steering column nuts		16 N.m (1.6 kgf.m, 12 lbf.ft)
	Steering pump bolts		22 N.m (2.2 kgf.m, 16 lbf.ft)
	Steering gearbox bolts	Use new bolts	58 N.m (5.9 kgf.m, 43 lbf.ft)
	Steering gearbox cushion bracket bolts		39 N.m (4.0 kgf.m, 29 lbf.ft)
	Tie-Rod end ball joint nut	'09-11 models	54 N.m (5.5 kgf.m, 40 lbf.ft)
	Tie-Rod end ball joint nut	'12 model	60 N.m (6.1 kgf.m, 44 lbf.ft)
	Tie-Rod end locking nut		44 N.m (4.5 kgf.m, 32 lbf.ft)
1: Parts to be tightened in a particular order. 2: Follow the S/M procedures closely for torque, sequence, and special steps.

STEERING SPECIFICATIONS CHART

Suspension

Location	Item	Remark	Torque
Front Suspension	Wheel nuts		127 N.m (13.0 kgf.m, 94.0 lbf.ft)
	Knuckle damper pinch bolts/nuts	Use new bolts/nuts	211 N.m (21.5 kgf.m, 156 lbf.ft)
	Lower arm ball joint castle nut	Use new nut	88 - 98 N.m (9.0 - 10.0 kgf.m, 65 - 72 lbf.ft)
	Lower arm bolt (16mm)	Use new bolt	162 N.m (16.5 kgf.m, 119 lbf.ft)
	Lower arm bolt (14mm)	Use new bolt	113 N.m (11.5 kgf.m, 83 lbf.ft)
	Stabilizer bar bushing holders flange bolts		39 N.m (4.0 kgf.m, 29 lbf.ft)
	Stabilizer link nut flange nuts	Use new nuts	78 N.m (8.0 kgf.m, 58 lbf.ft)
	Damper upper flange nuts		59 N.m (6.0 kgf.m, 43 lbf.ft)
Rear Suspension	Wheel nuts		127 N.m (13.0 kgf.m, 94.0 lbf.ft)
	Trailing arm bolts (to knucle)	Use new bolts	64 N.m (6.5 kgf.m, 47 lbf.ft)
	Upper arm bolt	Use new bolt	94 N.m (9.6 kgf.m, 69 lbf.ft)
	Upper arm ball joint castle nut		49 - 59 N.m (5.0 - 6.0 kgf.m, 36 - 43 lbf.ft)
	Lower arm self-locking nut	Use new nut	101 N.m (10.3 kgf.m, 74.5 lbf.ft)
	Lower arm A bolt	Use new bolt	93 N.m (9.5 kgf.m, 69 lbf.ft)
	Lower arm B nut	Use new nut	83 N.m (8.5 kgf.m, 61 lbf.ft)
	Lower arm B bolt	Use new bolt	152 N.m (15.5 kgf.m, 112 lbf.ft)
	Trailing arm bolts (to body)	Use new bolts	103 N.m (10.5 kgf.m, 75.9 lbf.ft)
	Stabilizer bar bushing holders flange bolts		22 N.m (2.2 kgf.m, 16 lbf.ft)
	Stabilizer link flange bolt (to lower arm B)	Use new bolt	69 N.m (7.0 kgf.m, 51 lbf.ft)
	Stabilizer link self-locking nut (to stabilizer bar)	Use new nut	37 N.m (3.8 kgf.m, 27 lbf.ft)
	Damper lower flange	Bolt Use new	Bolt 211 N.m (21.5 kgf.m, 156 lbf.ft)
	Damper upper flange bolts	Use new bolts	39 N.m (4.0 kgf.m, 29 lbf.ft)

SUSPENSIONS SPECIFICATIONS CHART

Brakes

Location	Item	Remark	Torque
Conventional Brake	Front brake caliper bolts		72 N.m (7.3 kgf.m, 53 lbf.ft)
	Front brake caliper bracket bolts		137 N.m (14.0 kgf.m, 101 lbf.ft)
	Front brake hose banjo bolt	Use new washers	34 N.m (3.5 kgf.m, 25 lbf.ft)
	Rear brake caliper bolts		22 N.m (2.2 kgf.m, 16 lbf.ft)
	Rear brake caliper bracket bolts		108 N.m (11.0 kgf.m, 79.6 lbf.ft)
	Rear brake hose banjo bolt	Use new washers	34 N.m (3.5 kgf.m, 25 lbf.ft)
	Master cylinder nuts		23 N.m (2.3 kgf.m, 17 lbf.ft)
	Master cylinder brake line		22 N.m (2.2 kgf.m, 16 lbf.ft)
	Brake booster nuts		25 N.m (2.5 kgf.m, 18 lbf.ft)
	Brake pedal nuts		25 N.m (2.5 kgf.m, 18 lbf.ft)
	Brake pedal bolts		22 N.m (2.2 kgf.m, 16 lbf.ft)
	Parking brake pedal bolts		22 N.m (2.2 kgf.m, 16 lbf.ft)
	Parking brake pedal nuts		22 N.m (2.2 kgf.m, 16 lbf.ft)
	Parking brake release lever nut		22 N.m (2.2 kgf.m, 16 lbf.ft)
VSA	VSA modulator control unit brake line (10 mm)		15 N.m (1.5 kgf.m, 11 lbf.ft)
VSA	VSA modulator control unit brake line (12 mm)		22 N.m (2.2 kgf.m, 16 lbf.ft)

BRAKES SPECIFICATIONS CHART

Body

Location	Item	Remark	Torque
Frame	Front suspension subframe damper bolts		22 N.m (2.2 kgf.m, 16 lbf.ft)
	Front suspension subframe front bracket bolts (14 mm)*1	Use new bolts	103 N.m (10.5 kgf.m, 75.9 lbf.ft)
	Front suspension subframe front bracket bolts (12 mm)		74 N.m (7.5 kgf.m, 54 lbf.ft)
	Front suspension subframe rear bracket bolts (14 mm)*1	Use new bolts	103 N.m (10.5 kgf.m, 75.9 lbf.ft)
	Front suspension subframe rear bracket bolts (12 mm)		117 N.m (11.9 kgf.m, 86 lbf.ft)
	Front suspension subframe rear bracket bolts (10 mm)	Use new bolts	38 N.m (3.9 kgf.m, 28 lbf.ft)
	Front suspension subframe retainer nuts		38 N.m (3.9 kgf.m, 28 lbf.ft)
	Front suspension subframe stiffener bolts		54 N.m (5.5 kgf.m, 40 lbf.ft)
	Steering gearbox stiffener bolts		38 N.m (3.9 kgf.m, 28 lbf.ft)
	Steering gearbox stiffener nuts		38 N.m (3.9 kgf.m, 28 lbf.ft)
	Trailer hitch bolts		83 N.m (8.5 kgf.m, 61 lbf.ft)
	Trailer hitch nuts		38 N.m (3.9 kgf.m, 28 lbf.ft)
	Rear suspension subframe bolts	Use new bolts	93 N.m (9.5 kgf.m, 69 lbf.ft)
1: Parts to be tightened in a particular order. 2: Follow the S/M procedures closely for torque, sequence, and special steps.

BODY SPECIFICATIONS CHART

Heating, Ventilation, and Air Conditioning

Location	Item	Torque
A/C Compressor	A/C compressor bracket bolts	44 N.m (4.5 kgf.m, 33 lbf.ft)
	A/C compressor bolts	22 N.m (2.2 kgf.m, 16 lbf.ft)
	A/C compressor center bolt	18 N.m (1.8 kgf.m, 13 lbf.ft)
	A/C compressor relief valve	13.2 N.m (1.35 kgf.m, 9.7 lbf.ft)
Receiver line	A/C pressure switch	9.3 N.m (0.9 kgf.m, 6.9 lbf.ft)

HEATING, VENTILATION, AND AIR CONDITIONING SPECIFICATIONS CHART

Body Electrical

Location	Item	Remark	Torque
Wipers/Washers	Windshield wiper arm nut		30 N.m (3.1 kgf.m, 22 lbf.ft)
Wipers/Washers	Windshield wiper linkage nut		31 N.m (3.2 kgf.m, 23 lbf.ft)

BODY ELECTRICAL SPECIFICATIONS CHART

Torque Specifications - General: Other Honda Ridgeline I рестайлинг