Maintenance Minder: Other Honda Odyssey III

EX-L Touring Model

1. Turn the ignition switch to ON (II).
2. Press the SEL/RESET button on the steering wheel repeatedly until the oil life is displayed (if more than 15%) or the maintenance message is displayed (if oil life is less than 15%). NOTE: If you are resetting the display when the oil life is more than 15%, or if the maintenance message "SERVICE DUE SOON" is displayed, make sure the maintenance items requiring service have been performed before resetting this display.
3. Press the SEL/RESET button for about 10 seconds. The display will change to the "CUSTOM SETUP" mode, then release the button.
4. Again momentarily press the SEL/RESET button to select "RESET." The maintenance item code(s) disappear and the oil life will be reset to "100." NOTE: If you want to cancel resetting, press the INFO button on the steering wheel. The display changes to "CANCEL," then press the SEL/RESET button on the steering wheel to cancel the procedure. NOTE: If the required service is performed and the display is not reset, or if the display is reset without performing the service, the system will not show the proper maintenance levels. This can lead to serious mechanical problems because there will be no record of when maintenance is needed. The engine oil life and the maintenance items may be reset independently only with the HDS.

Scheme 22

Scheme 23

Scheme 24

Scheme 25

1. To see the current engine oil life, turn the ignition switch to ON (II), and push and release the trip meter select/reset button on the instrument panel repeatedly until the engine oil life indicator is displayed.
2. If the oil life is 15 percent or less, you will see the oil life indicator (A) for several seconds every time you turn the ignition switch to ON (II). The maintenance minder indicator also comes on, the maintenance item code(s) for other maintenance items needing service are displayed next to the engine oil life indicator. Complete list of maintenance main items "A" (B) see scheme 12 Complete list of maintenance sub items "B" (C) see scheme 13
3. When the remaining engine oil life is less than 5 percent, you will see "CHANGE OIL" message in the odometer/trip meter display along with the same maintenance item code(s) every time you turn the ignition switch to ON (II).
4. When the oil life is 0 percent, the remaining oil life indicator blinks when the ignition switch is in the ON (II) position.
5. If you still do not perform the indicated maintenance, you will see a negative mileage, for example "-543," blinking in the display. This negative mileage means that you should have performed the indicated maintenance 543 miles ago.

Scheme 26

Scheme 27

1. Turn the ignition switch to ON (II).
2. Press the trip meter select/reset button on the instrument panel repeatedly until the engine oil life indicator is displayed.
3. Press and hold the trip meter select/reset button for about 10 seconds until the engine oil life and maintenance item code(s) blink, then release the button.
4. Press and hold the trip meter select/reset button again for about 5 seconds. The maintenance item code(s) disappear and the engine oil life will be reset to "100," then release the button.