Home ReviewsRefund
Home/Honda/Fit/Honda Fit I (2004-2009)/Repair manual/Testing & Diagnostics/DTC P2610: ECM/PCM Ignition Off Internal Timer Performance …
Contents Wiring diagrams Section: Testing & Diagnostics All sections

DTC P2610: ECM/PCM Ignition Off Internal Timer Performance Problem Honda Fit I

Testing & Diagnostics ~180 words

Note. Before you troubleshoot, record all freeze data and any on-board snapshot, and review the general troubleshooting information (see GENERAL TROUBLESHOOTING INFORMATION ).

  1. Turn the ignition switch ON (II).
  2. Clear the DTC with the HDS.
  3. Check for Temporary DTCs or DTCs with the HDS. Is DTC P2610 indicated? YES - Go to step 4 . NO - Intermittent failure, the system is OK at this time.
  4. Update the ECM/PCM if it does not have the latest software (see «UPDATING THE ECM/PCM»(ref-291410-S41633658632008072800000) ), or substitute a known-good ECM/PCM (see «SUBSTITUTING THE ECM/PCM»(ref-291410-S09944723422008072800000) ).
  5. Check for Temporary DTCs or DTCs with the HDS. Is DTC P2610 indicated? YES - If the ECM/PCM was updated, substitute a known-good ECM/PCM (see «SUBSTITUTING THE ECM/PCM»(ref-291410-S09944723422008072800000) ), then recheck. If the ECM/PCM was substituted, go to step 1 . NO - If the ECM/PCM was updated, troubleshooting is complete. If the ECM/PCM was substituted, replace the original ECM/PCM (see «ECM/PCM REPLACEMENT»(ref-291411-S17209936142008072800000) ). If any other Temporary DTCs or DTCs are indicated, go to the indicated DTCs troubleshooting.

More articles — Pgm-Fi System