Ignition Switch: Removal & Installation Honda Fit I

Replacement

SRS components are located in the area. Review the SRS component locations (see COMPONENT LOCATION INDEX ), and precautions and procedures (see PRECAUTIONS AND PROCEDURES ) before performing repairs or servicing.

Scheme 3

1. Make sure you have the anti-theft codes for the audio system. Make sure the ignition switch is OFF.
2. Disconnect the negative battery cable.
3. Remove the steering column covers (see «STEERING COLUMN REMOVAL AND INSTALLATION»(ref-291392-S33469481142008072800000) ).
4. Disconnect the 7P connector (A) from the ignition switch (B). (Scheme 3): Identifying 7P Connector And Ignition Switch
5. Remove the two screws and the ignition switch.
6. Install in the reverse order of removal.
7. After reconnecting the battery. Enter the anti-theft codes for the audio system. Set the clock.