Home ReviewsRefund Car not listed?
Home/Honda/Crosstour/Honda Crosstour I (2012-2012)/Repair manual/Steering Column Switches/Ignition Switch (V6): Removal & Installation
Contents Wiring diagrams Section: Steering Column Switches All sections

Ignition Switch (V6): Removal & Installation Honda Crosstour I

Steering Column Switches 1 illustration ~106 words

Ignition Switch Replacement

Note. SRS components are located in this area. Review the SRS component locations (see COMPONENT LOCATION INDEX ) and precautions and procedures (see PRECAUTIONS AND PROCEDURES ) before doing repairs or servicing.

Scheme 14

Scheme 14: Ignition Switch Replacement
Scheme 14: Ignition Switch Replacement
  1. Do the battery terminal disconnection procedure (see «BATTERY TERMINAL DISCONNECTION AND RECONNECTION»(ref-360074-S34095844792010042600000) ).
  2. Remove the steering column covers (see «COLUMN COVER REMOVAL/INSRALLATION»(ref-360087-S08368203492010042600000) ).
  3. Disconnect the 5P connector (A) from the ignition switch (B).
  4. Remove the two screws and the ignition switch.
  5. Install the parts in the reverse order of removal.
  6. Do the battery terminal reconnection procedure (see «BATTERY TERMINAL DISCONNECTION AND RECONNECTION»(ref-360074-S34095844792010042600000) ).

More articles — Ignition Switch (V6)