Interface Dial Removal/installation Honda Crosstour I

Note. Put on gloves to protect your hands. Take care not to scratch the dashboard and related parts. Lay a shop towel under the parts when working on them to protect the face panel from scratches or other damage.

Scheme 153

Scheme 154

1. Remove the audio unit (see «AUDIO UNIT REMOVAL/INSTALLATION»(ref-360124-S11397871042010042600000) ).
2. Remove the self-tapping screw and harness cover (A).
3. Remove the screws, and disconnect the interface dial 13P connector (A).
4. Remove the interface dial (B) from the audio-navigation switch panel (C). NOTE: Apply pressure slowly and steady until the knob (D) and dial (E) pops off.
5. Install the interface dial in the reverse order of removal.